How to Set up BFGMiner on the Raspbian on the Raspberry Pi.
Use your USB ASICs with the Low power Raspberry Pi, to get maximum efficiency for power to BTC.
The Rasbian OS does not contain a lot of support for this sort of thing so you need to follow this guide:
Step 0 :
To set-up find out the IP address then SSH into it using PuTTY:
Step 1: Update to latest Version
sudo aptitude update
sudo aptitude upgrade
Step 2: Install Librarys
sudo apt-get install libusb-1.0-0-dev libcurl4-gnutls-dev libjansson-dev uthash-dev libncurses5-dev libudev-dev autoconf automake libtool pkg-config screen
Step 3: Get BFGMiner
git clone git://github.com/luke-jr/bfgminer
(use: ls to find where it is)
Step 4 Configure the Software for Compiling
(optional: then use sudo make install to have it system wide. Not advised)
Step 5:Run BFGMiner
(stay in the bfgminer software then use below command changing caps to your settings.)
screen -S Mining ./bfgminer -o stratum+tcp://POOL.com:PORT -u USER -p PASSWORD
Step 6: Using Screen
then to do something else hit
Ctrl A D
and to get back to it use
screen -ls to see your running screens
then screen -r 0000 to get back to your screen
However If you are using Nanofury/Ice Fury you need HIDAPI which is VERY hit and miss and more likely miss than hit at the moment.
git clone git://github.com/signal11/hidapi
sudo make install
However this still might not work so check out video tomorrow on Minepeon:
My pool: http://full.sc/1tmZveB
Google+ : https://plus.google.com/+Tingawinga5
[email protected] team: 123464
Website: http://www.tingawinga.co.uk Buy Stuff Here: http://bit.ly/2oRV8i9
Raspberry Pi Alternate Options: The Reason They Are a Greater Buy
Raspberry Pi is not the baddest mini computer on the planet, and it is what its contenders are endeavoring to inform the remaining of the world. Now and then, a new mini computer is launched in the marketplace promising to be the largest one to defeat Raspberry Pi. In actual fact, you will find there’s new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and costs $30.
The Raspberry Pi is presented with four models throughout the years. Examples of these are Raspberry Pi Model B+, Pi 2 Model B, Zero, and the newest which is Pi 3 Model B.
Pi 3 was made to confirm that Raspberry Pi has the potential to fulfill a person with a lower priced computer for computer programming. It’s upgraded CPU with the Cortex A53, Hackaday explained, and runs on 1.2 GHz. Costing $35, the Raspberry Pi is the hottest-selling of all.
The Raspberry Pi, on the other hand, is not the sole single board computer(SBC) for homebrewed projects. There are a variety more out there that entails lower cost, and then some that can do more than Raspberry Pi for a little more, ZD Net reported.
For starters, there’s the Omega 2, sporting a modular nature enabling developers to incorporate Bluetooth or Gps unit without problems. It has internal Wi-Fi and flash storage; the Operating system is Linux distro founded upon the OpenWrt system. The Omega 2 is priced at $5 and can also operate on FreeBSD Operating system, and that is why it is really perfect for college students.
The BBC Micro:bit is priced at $16 and is ideal school students for their studying and prototyping projects. A 32-bit ARM Cortex processor energizes it from inside and it sticks out from the competition because of the 5×5 LED matrix. This feature provides 25 singularly programmable red Led lights for basic output.
There is also the BeagleBone Black, which is priced at $55 and like the Raspberry Pi, is additionally a community-supported platform both for enthusiasts and coders. It truly does work fast; it can certainly boost Linux in under Ten seconds and can develop in under 5 min’s. It is motorized by AM335x 1GHz ARM Cortex-A8 coupled with 512MB DDR3 RAM.
Another one is the NanoPi M1 Plus, that has been known as as the new Raspberry Pi killer. Priced at $30, it promises to have a better quality design and layout and was capable to add vital benefits similar to Wi-Fi and Bluetooth. In addition, it features an Infrared receiver, microphone, 8GB storage area, and power and reset buttons.
However, the perfect attribute of NanoPi M1 Plus is its power to run Ubuntu-Mate, Ubuntu-Core, and in addition Debian, Beta News described. It is excellent for business users, programmers, amateurs, and school students.
FriendlyElec rolls out Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi substitute
Get more information on official webpage: http://www.friendlyarm.com/index.php?route=product/product&product_id=176
You will find there’s new Raspberry Pi rival that is quite affordable. In actual fact, a number of people might consider it as a Pi substitute. The $30 FriendlyElec NanoPi M1 Plus has an arguably remarkable design and layout, as well as critical built-in features such as Wi-Fi and Bluetooth.