This Raspberry Pi GIO tutorial takes you through a lot of the basics of the GPIO pins and what you can do with them

Full Guide:

As you may know the general purpose input and output pins (GPIO) are used to communicate with other circuity. This includes thing such as extension boars, circuits, and much more. You can do some pretty cool stuff with them.

You should beware that playing around with the Raspberry Pi GPIO pins wrongly can result in destroying the Pi. The best way to avoid this is to double check that whatever you’re plugging in will be supported by the Pi.

In the little small circuit, I use in the Raspberry Pi GPIO tutorial I use the following equipment.

• 1 100-ohm resistor
• 1x Red LED
• GPIO Breakout Kit Assembled
• Breadboard
• Breadboard Wire/Jumper Cables

There is quite a bit of terminology around these pins but be sure to not let this turn you off from using them. We go into the terminology a little in the video but if you need more information be sure to look up some of the terms I used.

In the video we display a Raspberry Pi GPIO pinout diagram. If you would like this to use for future reference, then be sure head over the guide. You can find the link above.

We will be looking at doing many projects using the GPIO pins in the future. This includes stuff such as home automation! This is something I know a lot of people have been asking about.

I hope you have enjoyed this video on the Raspberry Pi GPIO pins. If you have any questions, feedback or anything else feel free to drop us a comment below. Also be sure to subscribe so you can stay up to date with all our latest Raspberry Pi projects, guides and much more.


Raspberry Pi Substitutes: The Reason Why They Are a Better Buy

Raspberry Pi isn’t the baddest mini computer all over the world, and it is what its opponents are endeavoring to explain to the remainder of the world. Now and then, a fresh mini computer is launched out there promising to be the largest one to overcome Raspberry Pi. The fact is, there’s a new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and is priced at $30.

The Raspberry Pi is introduced with four models in recent years. These include Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most recently released which is Pi 3 Model B.

Pi 3 was established to make certain that Raspberry Pi is able to please a person with a better value computer for developer work. It’s upgraded Processor chip with the Cortex A53, Hackaday announced, and runs on 1.2 GHz. At $35, the Raspberry Pi is the best-selling of all.

The Raspberry Pi, even so, isn’t the merely single board computer(SBC) for homebrewed projects. There are a variety more sold in the market that is less expensive, and then some that can do more than Raspberry Pi for a little extra, ZD Net announced.

For a start, there’s the Omega 2, that features a modular nature granting computer programmers to add in Wireless bluetooth or Gps system effortlessly. It has integrated Wi-Fi and flash memory; the Operating platform is Linux distro based on the OpenWrt system. The Omega 2 is priced at $5 and can even operate on FreeBSD Operating system, and that is why it really is perfect for college students.

The BBC Micro:bit is priced at $16 and is excellent for school students for their studying and prototyping projects. A 32-bit ARM Cortex cpu energizes it from the inside and it is different from the others simply because of its 5×5 LED matrix. This feature delivers 25 singularly programmable red LEDs for basic output.

In addition, there is the BeagleBone Black, which is priced at $55 and similar to the Raspberry Pi, is another community-supported platform both for lovers and designers. The system functions rapid; it does boost Linux in only 10-seconds and can develop in below 5 minutes. It’s fueled by AM335x 1GHz ARM Cortex-A8 as well as 512MB DDR3 RAM.

A fresh one is the NanoPi M1 Plus, that has been named as the new Raspberry Pi killer. At $30, it promises to have a better made design and layout and was competent to assimilate vital features similar to Wi-Fi and Bluetooth. What’s more, it offers an Infrared receiver, microphone, 8GB memory, and power and reset keys.

Yet, the perfect attribute of NanoPi M1 Plus is its capacity to run Ubuntu-Mate, Ubuntu-Core, and also Debian, Beta News revealed. It is appropriate for firm users, developers, lovers, and school students.

nanopi m1 plus specs

FriendlyElec launches Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Know more on official site:

There is a new Raspberry Pi competitor that is quite economical. To put it accurately, some individuals may see it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an certainly superb design and layout, plus critical built-in features just like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer