PCB Prototype

Rapid PCB Prototype Service

Month: February 2017 (page 2 of 5)

Slice: Raspberry Pi Media Player



Mo Volans from FiveNinjas shares Slice at World Maker Faire New York 2014. It’s a set-top media player that’s based on the brand new Raspberry Pi Compute Module. They’re in the process of crowdfunding the project, and have met their funding goal. Since it’s based on the Raspberry Pi hardware and XBMC software, the platform is totally hackable. source

Raspberry Pi Compute Module 3 (CM3) aims to consumer products

Sort of announced in July 2016, the most recent Raspberry Pi Compute Module 3 (CM3) is believed to arrive at the market in the near future. Last October computer equipment maker NEC already announced a new spread of professional P and V Series large format displays that easily embed the RPi CM3 module. The new module, offered in two flavors – CM3 and CM3L (lite) – will complement the CM1 module introduced before.

Specifications for the CM1, CM3 and CM3L SODIMM modules appear in the data sheet offered on the RPi web site
https://www.raspberrypi.org/documentation/hardware/computemodule/RPI-CM-DATASHEET-V1_0.pdf
. Where the CM1 was based on a BCM2835 processor chip (as used on the original RPi and RPi B+ models), the CM3 contains a quad-core 1.2 GHz BCM2837 chip, similar to the RPi 3. It offers 1 Gigabytes of LPDDR2 RAM and 4 Gigabytes eMMC Flash. The ‘L’ version is a CM3 without eMMC Flash, making it possible for the user to install his/her own SD/eMMC device. The pinout of the CM1 and CM3 modules are identical but the CM3 module is one mm higher (31 millimeters).

Pricing

The money necessary for the new modules isn’t known yet, but since a CM1 sells at about £20, a comparable price could possibly be predicted for the CM3.

In accordance with : https://www.elektormagazine.com/news/raspberry-pi-compute-module-3-cm3-to-hit-the-market-soon

Technical Specs

The CM3 is founded on the Raspberry Pi 3 hardware and is intended for industrial use to offer a affordable way for customers to make printed products based on the Pi hardware and software system. The Compute Module line is more compact and has less abilities and ports than a regular Raspberry Pi, allowing it to be suitable for Internet of Things (IoT) products.

“The module works with a standard DDR2 SODIMM form factor, sockets for which are made by several makers, are conveniently available in the market, and also are less expensive,” Raspberry Pi COO and hardware lead James Adams stated in a post.

There are two models of the CM3. The following are the specs for both of them:

Standard Version:

BCM2837 central processor at as high as 1.2GHz
1Gigabyte RAM
4Gigabyte of on-module eMMC flash

Lite Variant:

BCM2837 processor at as high as 1.2GHz
1GB RAM
Sdcard interface on Module pins which means that a person can connect it up to an eMMC or Sdcard that they select

Both models can be slotted into a newly released Compute Module IO Board V3 (CMIO3) which lets you perform the following:

Provides needed power to the CM3
Helps you to program the CM3 Standard’s flash memory or to utilize an Sdcard on the Lite version.
Connect to the processor interfaces in a a bit more friendly fashion (pin headers and flexi connectors, much like the Pi)
Supplies the required HDMI and USB connectors allowing you to have an full system that can boot Raspbian (or maybe the OS of your preference).

“This board features both a starting template for those who want to design with the Compute Module, and a fast way to start out tinkering with the hardware, and building and testing a system, before going to the expense of fabricating a made to order board,” Adam said.

The older Compute Module model will continue to be delivered, for folks who don’t require the CM3’s performance turbocharge. Depending on Raspberry Pi official mag The MagPi:

“With some caveats, the CM3 can be utilized a drop-in substitute for the CM1 because they are pin compatible; the CM3 is 1mm taller, nonetheless, while the CPU can pull much more current from the VBAT power line and will eventually bring in much more heat under heavy load.”

Otto & Raspberry Pi Compute Module



Next Thing Company’s Dave Rauchwerk discusses Otto, their custom hackable camera based on the Raspberry Pi Compute Module Camera. source

Raspberry Pi Compute Module 3 (CM3) concentrates on gadgets

Sort of announced in July 2016, the recent Raspberry Pi Compute Module 3 (CM3) is considered to hit the market quickly. Last October computer equipment maker NEC already announced a new variety of professional P and V Series large format displays that seamlessly embed the RPi CM3 module. The new module, for sale in two variants – CM3 and CM3L (lite) – will complement the CM1 module launched a few years ago.

Specs for the CM1, CM3 and CM3L SODIMM modules can be obtained from the data sheet found on the RPi site
https://www.raspberrypi.org/documentation/hardware/computemodule/RPI-CM-DATASHEET-V1_0.pdf
. Where the CM1 was based on a BCM2835 processor chip (as utilized on the original RPi and RPi B+ models), the CM3 provides a quad core 1.2 GHz BCM2837 processor chip, like the RPi 3. It has 1 GB of LPDDR2 RAM and 4 GB eMMC Flash. The ‘L’ version is a CM3 without having eMMC Flash, permitting the client to hook up his/her individual SD/eMMC product. The pinout of the CM1 and CM3 modules are the same but the CM3 module is one millimeter higher (31 mm).

Pricing

The money necessary for the new modules is not known yet, but as a CM1 sells at about £20, a comparable price could possibly be anticipated for the CM3.

Founded upon : https://www.elektormagazine.com/news/raspberry-pi-compute-module-3-cm3-to-hit-the-market-soon

Specifications

The CM3 is founded upon the Raspberry Pi 3 hardware and is designed for industrial use in order to offer a cost-effective way for consumers to make customized products based on the Pi software and hardware platform. The Compute Module line is smaller and has less functions and ports than a standard Raspberry Pi, so that it is ideal for Internet of Things (IoT) products.

“The module uses a standard DDR2 SODIMM form factor, sockets for which are made by a few producers, are effortlessly obtainable, and additionally are reasonable,” Raspberry Pi COO and hardware lead James Adams said in a blog post.

There are two designs of the CM3. Right here are the specs for both:

Standard Variant:

BCM2837 chip at as high as 1.2Gigahertz
1Gigabyte RAM
4Gigabyte of on-module eMMC flash

Lite Variant:

BCM2837 processor at as high as 1.2GHz
1GB RAM
Sdcard interface on Module pins consequently an end user can wire it up to an eMMC or Sdcard that they select

Both models can be slotted into a newly released Compute Module IO Board V3 (CMIO3) which helps you to execute the following:

Delivers required power to the CM3
Allows you to program the CM3 Standard’s flash memory or to make use of an Sdcard on the Lite version.
Connect to the processor interfaces in a a little more friendly fashion (pin headers and flexi connectors, similar to the Pi)
Provides the necessary HDMI and USB connectors to ensure that you have an whole system which can boot Raspbian (or maybe the OS of your choosing).

“This board presents both a starting template for those who want to design with the Compute Module, and a quick way to begin with experimenting with the hardware, and building and testing a system, before going to the fee for making a customized board,” Adam said.

The older Compute Module model will continue to be provided, for many who don’t require the CM3’s performance turbocharge. Depending on Raspberry Pi official magazine The MagPi:

“With several caveats, the CM3 may be used a drop-in replacement for the CM1 since they are pin compatible; the CM3 is 1mm taller, even so, while the CPU can pull far more current from the VBAT power source line and will definitely give rise to way more heat under heavy load.”

Eben Upton introduces the new Compute Module from Raspberry Pi | RS Components



Raspberry Pi Founder, Eben Upton, talks about the new form factor Raspberry Pi. The Compute Module and the Compute Module IO Development Board provides users with a more flexible form factor for professional embedded applications. Developed specifically for engineers in the professional market to create their own embedded system, the Raspberry Pi Compute Module fits into a standard DDR2 SODIMM socket and provides the same basic features of a standard Raspberry Pi.

http://uk.rs-online.com/web/ source

Raspberry Pi Compute Module 3 (CM3) concentrates on electronic devices

Sort of announced in July 2016, the new Raspberry Pi Compute Module 3 (CM3) is believed to hit the market soon. Last Oct . computer system equipment manufacturer NEC already announced a new array of professional P and V Series large format displays that effortlessly implant the RPi CM3 module. The new module, for sale in 2 flavors – CM3 and CM3L (lite) – will complement the CM1 module launched historically.

Specs for the CM1, CM3 and CM3L SODIMM modules may be found in the data sheet offered on the RPi web page
https://www.raspberrypi.org/documentation/hardware/computemodule/RPI-CM-DATASHEET-V1_0.pdf
. Where the CM1 was powered by a BCM2835 processor chip (as used on the original RPi and RPi B+ models), the CM3 features a quad-core 1.2 GHz BCM2837 chip, like the RPi 3. It consists of 1 Gigabytes of LPDDR2 RAM and 4 Gigabytes eMMC Flash. The ‘L’ version is a CM3 without eMMC Flash, encouraging the person to connect his/her own personal SD/eMMC device. The pinout of the CM1 and CM3 modules are identical but the CM3 module is one mm higher (31 millimeters).

Price

The money necessary for the new modules is not known yet, but since a CM1 retails at roughly £20, a equivalent price could very well be predicted for the CM3.

Based on : https://www.elektormagazine.com/news/raspberry-pi-compute-module-3-cm3-to-hit-the-market-soon

Specifications

The CM3 is based upon the Raspberry Pi 3 hardware and is intended for industrial use in order to provide a cheap means for folks to make customized products based on the Pi hardware and software system. The Compute Module products is smaller and has less features and ports than a standard Raspberry Pi, allowing it to be ideal for Internet of Things (IoT) products.

“The module works with a standard DDR2 SODIMM form factor, sockets for which are made by some makers, are easily available, and additionally are affordable,” Raspberry Pi COO and hardware lead James Adams said in a article.

There are 2 options of the CM3. Here are the technical specs for both of them:

Standard Version:

BCM2837 processor chip at up to 1.2GHz
1Gigabyte RAM
4Gigabyte of on-module eMMC flash

Lite Version:

BCM2837 processor at up to 1.2GHz
1GB RAM
Sdcard interface on Module pins and so a customer can wire it up to an eMMC or Sdcard that they select

Both variants can be slotted into a newly released Compute Module IO Board V3 (CMIO3) which lets you perform the following:

Delivers necessary power to the CM3
Lets you program the CM3 Standard’s flash memory or to utilize an Sdcard on the Lite version.
Access the processor interfaces in a a touch more friendly fashion (pin headers and flexi connectors, similar to the Pi)
Provides the required HDMI and USB connectors in order that you have an full system that can boot Raspbian (or maybe the Operating-system of your choosing).

“This board gives both a starting template for those who want to design with the Compute Module, and a fast way to begin with tinkering with the hardware, and building and testing a system, before you go to the fee for fabricating a custom-made board,” Adam said.

The older Compute Module model will continue to be delivered, for those who do not require the CM3’s performance upgrading. In line with the Raspberry Pi official mag The MagPi:

“With some caveats, the CM3 may be used a drop-in substitute for the CM1 because they are pin compatible; the CM3 is 1mm taller, nonetheless, while the CPU can pull far more current from the VBAT power supply line and will definitely bring in far more heat under heavy load.”

Cluster Hat for Raspberry Pi Zeros (Overview)



Raspberry Pi 2 + Cluster Hat + 4 Raspberry Pi Zeros

Pi Zeros communicate with the Pi 2 (or A+/B+) as USB Gadgets (g_cdc for network and serial console) via a USB hub on the hat which connects back to the Raspberry Pi 2. Power to the individual Zeros is controlled via GPIO pins so you can easily power cycle a crashed Zero.

For more information or to buy your own see http://clusterhat.com/ source

Raspberry Pi Compute Module 3 (CM3) aims to consumer products

Sort of announced in July 2016, the most recent Raspberry Pi Compute Module 3 (CM3) is believed to reach the market soon. Last Oct PC equipment manufacturer NEC previously announced a new spread of professional P and V Series large format displays that flawlessly include the RPi CM3 module. The new module, available in two options – CM3 and CM3L (lite) – will complement the CM1 module introduced a few years ago.

Specifications for the CM1, CM3 and CM3L SODIMM modules are available in the data sheet readily available on the RPi website
https://www.raspberrypi.org/documentation/hardware/computemodule/RPI-CM-DATASHEET-V1_0.pdf
. Where the CM1 was powered by a BCM2835 processor (as utilized on the original RPi and RPi B+ models), the CM3 contains a quad core 1.2 GHz BCM2837 processor, similar to the RPi 3. It provides 1 GB of LPDDR2 RAM and 4 GB eMMC Flash. The ‘L’ version is a CM3 devoid of eMMC Flash, making it possible for the customer to install his/her individual SD/eMMC device. The pinout of the CM1 and CM3 modules are the same but the CM3 module is one mm higher (31 mm).

Pricing

The price of the new modules isn’t known yet, but as a CM1 sells at around £20, a equivalent price may very well be predicted for the CM3.

Depending on : https://www.elektormagazine.com/news/raspberry-pi-compute-module-3-cm3-to-hit-the-market-soon

Specs

The CM3 is founded upon the Raspberry Pi 3 hardware and is created for industrial use to provide a cost efficient means for individuals to make customised products based upon the Pi hardware and software system. The Compute Module line is scaled-down and has less attributes and ports than a regular Raspberry Pi, allowing it to be appropriate for Internet of Things (IoT) products.

“The module works with a standard DDR2 SODIMM form factor, sockets for which are made by a few producers, are conveniently accessible, and are economical,” Raspberry Pi COO and hardware lead James Adams explained in a article.

There are 2 variants of the CM3. Listed below are the specs for both of them:

Standard Version:

BCM2837 processor chip at as high as 1.2GHz
1GB RAM
4GB of on-module eMMC flash

Lite Variant:

BCM2837 processor at as high as 1.2GHz
1GB RAM
Sdcard interface on Module pins for that reason a person can wire it up to an eMMC or Sdcard that they choose

Both versions can be slotted into a newly released Compute Module IO Board V3 (CMIO3) which lets you execute the following:

Gives needed power to the CM3
Helps you program the CM3 Standard’s flash memory or to work with an Sdcard on the Lite version.
Connect to the processor interfaces in a a little more friendly fashion (pin headers and flexi connectors, just like the Pi)
Offers the needed HDMI and USB connectors so you have an complete system that can boot Raspbian (or the Operating system that you choose).

“This board offers both a starting template for those who want to design with the Compute Module, and a fast way to get started on experimenting with the hardware, and building and testing a system, before going to the expense of fabricating a tailor-made board,” Adam said.

The older Compute Module model will still be delivered, for individuals who do not need the CM3’s performance enhancement. As stated by the Raspberry Pi official mag The MagPi:

“With some caveats, the CM3 can be utilized a drop-in replacement for the CM1 since they are pin compatible; the CM3 is 1mm taller, having said that, while the CPU can pull a lot more current from the VBAT power line and will eventually generate a lot more heat under heavy load.”

Rigid Circuit Card House Positioned in China



OurPCB Tech Limited(www.ourpcbte.com) was founded in 2005, We have provided a professional Printed circuit board & PCB Assembly services for more than 2,500 customers around the globel.

Source

Rigid Circuit Card House Positioned in China

2-pcb-house-factory

PCBWING Technology Co., Ltd (primarily for prototype)

Depending on https://www.pcbwing.com/Aboutus.php

PCBWING Technology Co., Ltd is among the list of China’s main firm providing circuit board services, which is a partnership of three of the top 10 circuit board makers in China. Our specialty are quick-turn, small quantity orders.
We’re an innovative electronics contract manufacturer headquartered in Beijing, China. We are already focused on circuit board prototype during the last 12 years. We have supported widely recognized firms or institutions across the world, including Microsoft, Hewlett packard, Toshiba, Jet Propulsion Laboratory of China, Altium, University of Cambridge, University of Wisconsin, Stanford University, Harvard University, Beijing University, Siemens and also China Mobile. We have more competitve pricing, well-trained technical engineers and great fabrication capabilities. We suggested people to communicate with us and consider us as a solid partner for circuit board fabricating services.

We offer:
Superior quality. Affordable pricing. On time shipping and delivery.

PCBWING Technology Co., Ltd can be your reliable producer for circuit board prototype service.

Speak to PCBWING

Sales Office Contact:
[email protected]

Service Contact:
[email protected]

Marketing campaigns Contact: [email protected]

Phone number:
+8615601330384

Location:
Room520A , Heqiao Plaza B Tower No.8 Guanghua Road
Chaoyang District , Beijing
China Postcode 100026

2-pcb-house-factory

STG

Based on : http://www.china-pcbassembly.com/factory-view-n100-1.html

Turk-key PWB assemblage solution supplier

(Supporting white label PWB )

STG is a top notch certified PWB and PCBA producer in China, which offers OEM/ODM service for worldwide purchasers . With years of experiences, STG is not simply a manufacturer, but in addition a qualified professional designer for new concepts, new innovations in accordance with consumers. Our product selection contains assorted markets, like consumer electronics, telecoms, industrial items , automobile assemblies, medical equipment and many more.

Our main services can include electronics and metal casing manufacturing, for instance , printed circuit boards PWB manufacture, part purchasing, PWB assemblage, plastic/metal house build, die-casting and even custom manufacture. With encountered working team from STG fully trained, their performance will be awesome.

Get in contact with STG

China Shenzhen Office

TEL: +86-0755-27929725
FAX: +86-0755-27929724
Inbox: [email protected]

Location: Huolibao Building 5F , Technology Park, Nanshan, Shenzhen, 518100, China.
Website: china-pcbassembly.com

HK Office

Tel: 852-36458129
Fax: 852-36458092
Inbox: [email protected]
Location: 11/F FRONT BLK,HANG LOK BLDG 130 WING LOK ST,SHEUNG WAN, Hong Kong
Website: china-pcbassembly.com .

2-pcb-house-factory

Topscom Technology Co.,Ltd.

Based upon : http://www.topscom.com.cn/info-132-en.html

Corporation Intro

Twenty Years Of Electronics Complete Original equipment manufacturer / ODM, Electronic Contract Manufacturing(sometimes referred to as ECM) and Circuit Card Assy Solutions — Shenzhen Topscom

Topscom is a popular Electronics Manufacturing Services (otherwise known as EMS) source specialized in delivering impressive design and fabricating services to auto, commercial, medical-related, end-user, telecom, and tech enterprises. With monetary year 2013 income of 360 Million United states dollar, Topscom aids consumers design and layout, construct, shipping and delivery, and devices that presents consumers with entire design, engineering, and fab resources which are vertically incorporated with parts to optimize their operations by reducing their prices and lowering the time period to markets.

Topscom provides an vast selection of manufacture, engineering and machining services, especially in-house highly precise SMT mount, plastic injection casting, high volume metal stamping, die-casting and special fabricating.

Full-equipped Sectors

Our different departments are aimed to deliver an huge range of fabricating, engineering and machining services:
Our SMT features address 0201, zero-Lead and flip-chip techniques.
Our plastic injection molding dept is aligned with superior devices in white room and cold water cooling system. A specialized production line is moreover meant to get rid of and slice the material grain.
Our metal stamping dept is equipped with CNC process center, silk equipment as well as drilling equipment from Japan and Taiwan.
In our mold tooling dept, we use Pro-Engineer pro software system for reliable design assistance. Employing EROWA grips, we are able to limit the accuracy and reliability within 3 ums.
To keep quality control strategy excellent, we frequently compare and contrast our test flow records. Furthermore, we maintain purchase branches in Tokyo, Singapore and also Hong Kong run by our central supplies storage facility in Shenzhen.

Our manufacturing facility is located in Shenzhen, China with a sum place of 200,000 square meters and above 4 thousand workers. We definitely trust the importance of our staff member and want to retain a specialized mindset and commercial culture that builds creativeness and offers job satisfaction.

The management accentuates continual training, open interaction, group interaction and cooperation in decision-making process.

With massive experience of cooperating with high-technology companies and diverse customer base in wide range of products, we are hugely assured to present outstanding services, high adaptability, inexpensive mfg solutions and prompt delivery for our purchasers.

Our major clients list globally: Rda (Sydney) , Bestdl (Belgium), Sqp (France), Destst, Metro (Israel), Aji, Fujitsu, Sony (Japan), Dgsb (Malaysia), Rdi (Netherlands), Mlcroalp(Singapore), Inventron, Tempel (Spain), Imc (England), Cisco (America).

Find US

Tel: +86-755-22211988
Telefax:+86-755-83768890
Email: [email protected]
Mobile :+86 13502814037
Location: #18, Tannan Road,Tanjia Industrial Zone,Gongming Street,Guangming New District,Shenzhen , China.

HK Workspace:

Location : First Building Weigan Center JiuLong HK
Email: [email protected]( Ms.Ivy Ko)

2-pcb-house-factory

EasyEDA Zero Cost Net Based EDA Tool

EasyEDA is Obsessed With New Technology

We’re manufacturers, geeker and technical engineers. When we needed to design and construct several hardware a couple of years ago, we contributed several weeks on the lookout for the perfect specialized tools. We called for schematic capture, spice simulation and PCB layout but yet we required it not to be merely for Windows Operating system and we did not like the idea of having to fork out tons of dollars to own a tremendous program suite and then devote 2 or 3 weeks understanding how to use it.

Our purpose is to assist developers move on from thought to constructed prototype faster by featuring full data and cooperation software for electronic design. Whether you are a dabbler desirous to test your very first project or a experienced engineer looking for a production lift, our objective is to eliminate the tedium in taking a design to our life. We desire to hear what you are working away at or any ideas about the way we can help you, hence don’t hesitate to email us.

Simply speaking, EasyEDA will give you a less strenuous EDA experience, meaning you can take pleasure in more of the process from a concept to a item.

Business Line And Pricing

There aren’t any 100 % free business models; EasyEDA is required to support itself and as a consequence it has to support the team also.

Seeking to give you a disruptive innovation, we provide a great zero cost web based EDA program, but yet we seek to earn a living from several other services, just like supplying PCB trades, PCB assy, ads and special project reviews by our pro electronics engineers.

Don’t hesitate to use EasyEDA, we promise EasyEDA’s primary features are free of charge to each one.

Get Hold of Us

Address:

30A, Area A, Shennan Garden Bldg, Nanshan, Shenzhen , Guangdong
Postal Code: 518000

Business development/association:
[email protected]

All other inquiries:
[email protected]

Raspberry Pi – Compute Module



source

Raspberry Pi Compute Module 3 (CM3) focuses on consumer electronics

Sort of announced in July 2016, the most up to date Raspberry Pi Compute Module 3 (CM3) is assumed to reach the market in the near future. Last Oct computer equipment company NEC already announced a new variety of professional P and V Series large format displays that gracefully implant the RPi CM3 module. The new module, for sale in 2 options – CM3 and CM3L (lite) – will complement the CM1 module released before.

Specifications for the CM1, CM3 and CM3L SODIMM modules can be found in the data sheet obtainable on the RPi internet site
https://www.raspberrypi.org/documentation/hardware/computemodule/RPI-CM-DATASHEET-V1_0.pdf
. Where the CM1 was driven by a BCM2835 processor (as used on the original RPi and RPi B+ models), the CM3 consists of a quad core 1.2 GHz BCM2837 processor, similar to the RPi 3. It has 1 Gigabyte of LPDDR2 RAM and 4 Gigabyte eMMC Flash. The ‘L’ version is a CM3 without eMMC Flash, allowing the person to connect his/her individual SD/eMMC product. The pinout of the CM1 and CM3 modules are identical but the CM3 module is one mm higher (31 mm).

Cost

The price of the new modules isn’t known yet, but as a CM1 is sold at roughly £20, a comparable price might be anticipated for the CM3.

Determined by : https://www.elektormagazine.com/news/raspberry-pi-compute-module-3-cm3-to-hit-the-market-soon

Specifications

The CM3 is founded upon the Raspberry Pi 3 hardware and is intended for industrial use in order to provide a cheap approach for people to make printed products based upon the Pi hardware and software system. The Compute Module line is more compact and has less benefits and ports than a regular Raspberry Pi, allowing it to be to suit Internet of Things (IoT) products.

“The module uses a standard DDR2 SODIMM form factor, sockets for which are made by some makers, are conveniently available, and also are economical,” Raspberry Pi COO and hardware lead James Adams said in a blog post.

There are 2 versions of the CM3. Below are the technical specs for both:

Standard Version:

BCM2837 processor chip at as high as 1.2GHz
1Gigabyte RAM
4Gigabyte of on-module eMMC flash

Lite Variant:

BCM2837 processor at as high as 1.2GHz
1GB RAM
SD card interface on Module pins for that reason a user can wire this up to an eMMC or SD card that they pick

Both variants can be slotted into a newly released Compute Module IO Board V3 (CMIO3) which helps you to carry out the following:

Supplies essential power to the CM3
Enables you to program the CM3 Standard’s flash memory or to work with an SD card on the Lite version.
Access the processor interfaces in a a little bit more friendly fashion (pin headers and flexi connectors, similar to the Pi)
Supplies the required HDMI and USB connectors allowing you to have an complete system which can boot Raspbian (or the Operating system of your choice).

“This board presents both a starting template for those who want to design with the Compute Module, and a quick way to begin experimenting with the hardware, and building and testing a system, before you go to the cost of making a custom-made board,” Adam said.

The older Compute Module model will continue to be offered, for folks who wouldn’t like the CM3’s performance boost. As stated by the Raspberry Pi official magazine The MagPi:

“With several caveats, the CM3 may be used a drop-in replacement for the CM1 being that they are pin compatible; the CM3 is 1mm taller, yet, while the CPU can pull a great deal more current from the VBAT power supply line and definately will produce a whole lot more heat under heavy load.”

Awesome Hardware #0092-A: Ryzen to Launch at GDC? Intel’s Pentium G4560, SpaceX Returns



Watch Side B on Kyle’s Channel: https://www.youtube.com/watch?v=FUKlj_pkJmA
BUY SHIRTS/MUGS/GLASSES: http://store.paulshardware.net | My Amazon Link: http://bit.ly/PHAmazon
OPEN DESCRIPTION FOR LINKS & TIMESTAMPS

Awesome Hardware #0092-A: Ryzen to Launch at GDC? Intel’s Pentium G4560, SpaceX Returns
Originally broadcast LIVE on http://twitch.tv/awesomehardware
We’ll be doing another show next Tuesday @ 5:30PM PT!

–== TIME STAMPS (Thanks to AlphaCore for these!!) ==–

HOT & HEAVY HARDWARE
00:04:03 | Raspberry Pi Compute Module 3 launched
00:08:12 | AMD Set to Launch Ryzen Before March 3rd, Meeting Q1 Target
00:11:15 | Much to the carnival: AMD Ryzen probably comes on 28 February
00:13:18 | AMD Ryzen 4 Core CPUs Begin Sampling, Will Take on Intel’s i3 & i5
00:18:32 | Intel’s Pentium G4560 Kaby Lake Reviewed

TALES FROM SPACE
00:24:40 | SpaceX Falcon 9: What Next? After Returning To Flight With Iridium Launch, Company Has Busy Launch Schedule
00:31:40 | Japan’s Small Experimental Rocket Fails to Launch Tiny Satellite

SWORD FIGHT
00:35:11 | [NEWS] Switch’s paid online is made to attract third-party devs
00:39:25 | Should you buy a Nintendo Switch?
00:48:17 | Are paid online access gaming services worth it?

NEWS
00:55:28 | Stolen Razer Project Valerie appears on Chinese auction site
01:01:07 | Early renderings of the Google Pixel 2 emerge
01:03:37 | Atari teases its return to gaming hardware

–== LINKS / TOC ==–

Intro
Announcements
Shirts/Mugs/Glasses
http://store.paulshardware.net/
http://www.awesomesaucenetwork.com/store

1.) HOT AND HEAVY HARDWARE
Raspberry Pi Compute Module 3 launched
http://hexus.net/ce/news/gadgets/101509-raspberry-pi-compute-module-3-launched/
AMD Set to Launch Ryzen Before March 3rd, Meeting Q1 Target
http://www.anandtech.com/show/11031/amd-set-to-launch-ryzen-before-march-3rd-meeting-q1-target
Ryzen Launch: February 28? GDC?
https://www.heise.de/newsticker/meldung/Kerniges-zum-Karneval-AMD-Ryzen-kommt-wohl-am-28-Februar-3597324.html (German)
AMD 4-Core Ryzen Samples Shipping Out?
http://wccftech.com/amd-launching-ryzen-gdc-2017/
An Exciting Kaby Lake CPU? Intel’s Pentium G4560 Kaby Lake Reviewed
http://wccftech.com/intel-pentium-g4560-ultimate-budget-cpu-65-usd/

2.) TALES FROM SPACE
SpaceX Returns to Flight
http://www.ibtimes.com/spacex-falcon-9-what-next-after-returning-flight-iridium-launch-company-has-busy-2476288
http://www.space.com/35340-spacex-nails-1st-stage-landing-again-in-return-to-flight-video.html
Japan’s Small Experimental Rocket Fails to Launch Tiny Satellite
http://www.space.com/35341-experimental-japanese-rocket-launch-fails.html

3.) SWORDFIGHT
Nintendo Switch Announced; ships March 3, includes paid online services
http://www.tweaktown.com/news/55911/switchs-paid-online-made-attract-third-party-devs/index.html
Should you buy a Nintendo Switch?
http://www.strawpoll.me/12134651
Are paid online access services (such as PlayStation Network, Xbox Live) worth it?
http://www.strawpoll.me/12134679

4.) NEWS
Stolen Razer Project Valerie appears on Chinese auction site
http://hexus.net/tech/news/laptop/101467-stolen-razer-project-valerie-appears-chinese-auction-site/
Google Pixel 2 – Early Renders
http://www.in.techradar.com/news/phone-and-communications/mobile-phones/early-renderings-of-the-google-pixel-2-emerge/articleshow/56624079.cms
What is Atari GameBand?
http://hexus.net/gaming/news/hardware/101539-atari-teases-return-gaming-hardware/

▷ My Amazon Link
(US): http://bit.ly/PHAmazon
(CAN): http://bit.ly/PHAmazonCA
(UK): http://bit.ly/PHAmazonUK

▷ MY STORE – shirts, mugs, pint glasses & hoodies
http://store.paulshardware.net

▷ SOCIAL
Twitter: @paulhardware
http://www.twitter.com/paulhardware
Facebook:
https://www.facebook.com/pages/Pauls-Hardware/195425877329550
Instagram:
http://instagram.com/paulhardware source

Raspberry Pi Compute Module 3 (CM3) focuses on consumer products

Sort of announced in July 2016, the most recent Raspberry Pi Compute Module 3 (CM3) is known to arrive at the market very soon. Last Oct . PC equipment company NEC already announced a new spread of professional P and V Series large format displays that easily implant the RPi CM3 module. The new module, obtainable in two flavors – CM3 and CM3L (lite) – will complement the CM1 module introduced in past times.

Specs for the CM1, CM3 and CM3L SODIMM modules can be obtained from the data sheet accessible on the RPi web-site
https://www.raspberrypi.org/documentation/hardware/computemodule/RPI-CM-DATASHEET-V1_0.pdf
. Where the CM1 was powered by a BCM2835 processor (as used on the original RPi and RPi B+ models), the CM3 sports a quad core 1.2 GHz BCM2837 processor chip, like the RPi 3. It provides 1 Gigabyte of LPDDR2 RAM and 4 Gigabyte eMMC Flash. The ‘L’ version is a CM3 not having eMMC Flash, empowering the person to connect his/her own personal SD/eMMC device. The pinout of the CM1 and CM3 modules are the same but the CM3 module is one mm higher (31 mm).

Price

The buying price of the new modules isn’t known yet, but because a CM1 sells at nearly £20, a similar price is likely to be anticipated for the CM3.

Based upon : https://www.elektormagazine.com/news/raspberry-pi-compute-module-3-cm3-to-hit-the-market-soon

Specs

The CM3 is based upon the Raspberry Pi 3 hardware and is for the purpose of industrial use to give a less expensive option for individuals to make custom products based on the Pi software and hardware platform. The Compute Module product line is scaled-down and has less attributes and ports than a regular Raspberry Pi, that makes it perfect for Internet of Things (IoT) products.

“The module has a standard DDR2 SODIMM form factor, sockets for which are made by some manufacturers, are very easily available in the market, and are economical,” Raspberry Pi COO and hardware lead James Adams mentioned in a article.

There are two designs of the CM3. Listed here are the specs for both:

Standard Version:

BCM2837 central processor at up to 1.2Gigahertz
1Gigabyte RAM
4Gigabyte of on-module eMMC flash

Lite Version:

BCM2837 processor at up to 1.2GHz
1GB RAM
SD card interface on Module pins so an individual can connect it up to an eMMC or SD card that they select

Both models can be slotted into a newly released Compute Module IO Board V3 (CMIO3) which helps you to complete the following:

Offers needed power to the CM3
Allows you to program the CM3 Standard’s flash memory or to use an SD card on the Lite version.
Access the processor interfaces in a slightly more friendly fashion (pin headers and flexi connectors, similar to the Pi)
Offers the necessary HDMI and USB connectors allowing you to have an full system which can boot Raspbian (or the OS of your preference).

“This board features both a starting template for those who want to design with the Compute Module, and a fast way to get started on experimenting with the hardware, and building and testing a system, before going to the fee for fabricating a tailor-made board,” Adam said.

The older Compute Module model will still be made available, for individuals that don’t need the CM3’s performance turbocharge. As reported by the Raspberry Pi official mag The MagPi:

“With a couple of caveats, the CM3 may be used a drop-in replacement for the CM1 since they are pin compatible; the CM3 is 1mm taller, nevertheless, while the CPU can pull way more current from the VBAT power source line and will eventually produce way more heat under heavy load.”

Wireless Electronic Circuit Board Manufacturing Unit Positioned in China



Random Arcade Pcb thrown on a 13″ tube for testing. Game board works nice. The colors and other settings not adjusted.there was a 10uf 25v capacitor that fell right off the game board!! Would explain a bit of curl in the top corner!!!

Enjoy!!

Source

Wireless Electronic Circuit Board Manufacturing Unit Positioned in China

2-pcb-house-factory

PCBWING Tech Co., Ltd (primarily for prototype)

Source https://www.pcbwing.com/Aboutus.php

PCBWING Tech Co., Ltd is on the list of China’s primary company offering electronic circuit board services, which is actually a collaboration of 3 of the top ten electronic circuit board makers in China. Our edges are fast-turn, low quantity orders.
We are a new electronics contract manufacturer (ECM) in Beijing, China. We are actually centered on electronic circuit board prototype over the past 12 years. We have served renowned enterprises or associations all over the world, which include Microsoft, Hewlett packard, Toshiba, Jet Propulsion Laboratory of China, Altium, University of Cambridge, University of Wisconsin, Stanford University, Harvard University, Beijing University, Siemens and also China Mobile. We have competitive prices, well-trained engineers and high-quality fabricating expertise. We invited people to contact with us and take into consideration us as a professional partner for electronic circuit board fabricating services.

We promise:
Quality. Reasonable pricing. Prompt delivery.

PCBWING Tech Co., Ltd will be your reputable producer for electronic circuit board prototype service.

Make contact with PCBWING

Sales Office Contact:
[email protected]

Help Contact:
[email protected]

Marketing or advertising Contact: [email protected]

Mobile:
+8615601330384

Address:
Room520A , Heqiao Plaza B Tower No.8 Guanghua Road
Chaoyang District , Beijing
China Postcode 100026

2-pcb-house-factory

STG

According to : http://www.china-pcbassembly.com/factory-view-n100-1.html

Turn-key PCB assy solution company

(Serving white label PCB )

STG is a top rated specialized PCB and PCBA producer in China, which supplies OEM/ODM service for worldwide purchasers . With years of expertise, STG is not simply a producer, but in addition a specialist designer for new ideas, new creations based upon clients. Our product range covers assorted fields, for example , electronics, telecoms, industrial items , auto assemblies, medical equipment and many more.

Our primary services consist of electronics and metal casing fabrication, including printed circuit boards PCB manufacturing, element purchase, PCB assy, plastic/metal house build, die-casting as well as made to order manufacturing. With proficient team members here at STG fully trained, their performance will be superb.

Connect with STG

China Shenzhen Office

Telephone: +86-0755-27929725
FAX: +86-0755-27929724
Inbox: [email protected]

Address: Huolibao Building 5F , Technology Park, Nanshan, Shenzhen, 518100, China.
Web-site: china-pcbassembly.com

Hong Kong Office

Telephone: 852-36458129
Fax: 852-36458092
Inbox: [email protected]
Address: 11/F FRONT BLK,HANG LOK BLDG 130 WING LOK ST,SHEUNG WAN, Hong Kong
Web-site: china-pcbassembly.com .

2-pcb-house-factory

Topscom Tech Co.,Ltd.

Based upon : http://www.topscom.com.cn/info-132-en.html

Business Profile

2 Full Decades Of Electronics Turnkey Original equipment manufacturer / ODM, Electronic Contract Manufacturing(or ECM) and Printed Circuit Board Assembling Services — Shenzhen Topscom

Topscom is a leading Electronics Manufacturing Services (often known as EMS) provider focused on providing new design and production services to auto, manufacturing, health-related, prospects, telecom, and technology corporations. With monetary year 2013 profits of 360 , 000, 000 Dollars, Topscom aids purchasers design and layout, produce, shipping and delivery, and electronics which presents clients with full design, engineering, and fabricating resources which are vertically bundled with elements to improve their operations by lessening their prices and bringing down the hours to markets.

Topscom can provide an extensive number of manufacture, engineering and machining services, and these include in-house highly exact SMT mount, plastic injection shaping, high volume metal stamping, die-casting and customized manufacture.

Full-equipped Business units

Our various divisions are aimed to provide you with an wide range of manufacture, engineering and machining services:
Our SMT capacities include 0201, lead-Free and flip-chip technologies.
Our plastic injection molding work group is aligned with sophisticated machines in white room and ice water air conditioning system. A unique production line is also designed to eliminate and slice the material grain.
Our metal stamping division comes with CNC process center, silk devices and drilling devices received from Japan and Taiwan.
In our mold tooling dept, we employ Pro-Engineer expert software system for efficient design assistance. Utilising EROWA grips, we can easily keep control on the accuracy and reliability within 3 ums.
To retain quality control system efficacious, we continuously evaluate our test flow tables. Furthermore, we preserve purchasing offices in Tokyo, Japan, Singapore and also Hong Kong operated by our central materials storage place in Shenzhen.

Our plant is located in Shenzhen, China with a total region of 200,Thousand square meters and over 4 thousand employees. We certainly trust in the significance of our staff members and anticipate to keep a qualified perspective and company culture that builds creativity and offers job fulfillment.

The management stresses frequent training, open interactions, group interaction and engagement in decision-making process.

With superior experience of cooperating with high-technology corporations and varied consumer base in wide product range, we’re really assured to supply wonderful services, high flexibleness, affordable fabricating solutions and punctual delivery for our customers.

Our best rated clients list globally: Rda (Sydney) , Bestdl (Belgium), Sqp (France), Destst, Metro (Israel), Aji, Fujitsu, Sony (Japan), Dgsb (Malaysia), Rdi (Netherlands), Mlcroalp(Singapore), Inventron, Tempel (Spain), Imc (United kingdom), Cisco (America).

Touch US

Telephone number: +86-755-22211988 (50 Line)
Facsimile:+86-755-83768890
Inbox: [email protected]
Mobile phone :+86 13502814037
Address: No.18, Tannan Road,Tanjia Industrial Village,Gongming Street,Guangming New District,Shenzhen , Guangdong Province China.

Hong Kong Workplace:

Position : 1st Building Weigan Center JiuLong Hong Kong
Inbox: [email protected]( Ms.Ivy Ko)

2-pcb-house-factory

EasyEDA Cost-free Net Based EDA Program

EasyEDA is Positive Of New Technology

We are makers, hackers and technicians. When we would like to design and build a few hardware several years ago, we contributed weeks looking for the correct tools. We desired schematic capture, spice simulation and PCB layout but we required it to not be only for Ms windows and we did not prefer the thought of having to pay back tons of dollars to receive a sizeable software suite and thereafter commit 2 or 3 weeks finding out how to apply it.

Our mission is to help developers move on from thought to produced prototype more rapidly by delivering all-inclusive info and collaboration software programs for electronic design. Whether you are a amateur attempting to take a crack at your first project or a master industrial engineer hoping for a work flow improvement, our aspiration is to take away the boredom in taking a idea to life. We would love to hear what you are focusing on or any ideas on the way we can help you, thus go ahead and email us.

In summary, EasyEDA will present you with a less arduous EDA experience, so its possible to enjoy more of the trip from a thought to a product.

Business Line And Pricing

You don’t see any 100 % free business models; EasyEDA has to uphold itself and as a result it is required to maintain the staff members way too.

Making an attempt to present you with a disruptive innovation, we offer a superb free internet based EDA program, but yet we look to generate income from different services, for instance providing PCB deals, PCB assy, ads and special project reviews by our qualified electronic specialists.

Please work with EasyEDA, we assure EasyEDA’s root features are free of charge to each one.

Touch Base with Us

Location:

30A, Area A, Shennan Garden Bldg, Nanshan, Shenzhen , Guangdong Province
Postal Code: 518000

Business development/co-operation:
[email protected]

All the other inquiries:
[email protected]

Weekly Roundup #19 – New Maker Products



This week’s WR-NMP has the good, bad and ugly of Maker products. Unusually quiet, but some to avoid!

More Info:
http://mickmake.com/

Support Me:
Patreon: https://www.patreon.com/MickMake

Feedback Me:
Email: [email protected]

Follow Me:
YouTube: https://www.youtube.com/c/MickMakes
Facebook: https://www.facebook.com/MickMakes/
Twitter: https://twitter.com/MickMakes
GooglePlus: https://plus.google.com/+MickMakes
Pinterest: https://www.pinterest.com/MickMakes/
Tumblr: https://mickmakes.tumblr.com/
Feed: http://feeds.specificfeeds.com/mickmake
Github: https://github.com/MickMakes

# Kickstarter
SmartMachine® and SmartModule

NIX
https://www.kickstarter.com/projects/517014753/the-world-first-high-resolution-full-color-3d-prin
Kube OpenLathe
https://www.kickstarter.com/projects/1932619845/kube-openlathe-the-open-source-glass-blowing-lathe
SmartPlantPi
https://www.kickstarter.com/projects/sunair/smartplant-pi-smart-garden-with-your-raspberry-pi
Notixed
https://www.kickstarter.com/projects/1728237598/notixed-turn-your-pi-zero-to-usb-device
Plezmo
https://www.kickstarter.com/projects/1095902547/plezmo-wireless-building-blocks-for-coding-and-cre
Root, Tree and Mote for Robox

Digital MPPT and Solar BMS
https://www.kickstarter.com/projects/electrodacus/digital-mppt-and-solar-bms-for-a-net-zero-energy-h
Stereo DSP Filter Project
https://www.kickstarter.com/projects/2024172272/stereo-dsp-filter-project

# IndieGoGo
Indie
https://www.indiegogo.com/projects/indie-the-most-reliable-desktop-3d-printer#/
Y-Switch
https://www.indiegogo.com/projects/y-switch-wifi-based-smartphone-controlled-switch-light#/
CulBox
https://www.indiegogo.com/projects/culbox-open-source-wearable-watch-for-arduino-bluetooth#/
Creating a portable tracker for your baggage
https://www.indiegogo.com/projects/creating-a-portable-tracker-for-your-baggage-travel-technology#/
Aquacell
https://www.indiegogo.com/projects/aquacell-battery-that-charges-with-water-cool#/

# CrowdSupply
FX Development Board
https://www.crowdsupply.com/macrofab-inc/fx-development-board

# Others
GPIO Hammer Header
GPIO Hammer Header (Solderless)
Pi Compute Module version 3

Compute Module 3 Launch!

# Tindie
VHDL training board
https://www.tindie.com/products/microwavemont/vhdl-training-board/
Pocket Power
https://www.tindie.com/products/Wisselbp/pocket-power-16001300/
DAAC-Hat for Raspberry Pi
https://www.tindie.com/products/mjpelletier5325/daac-hat-for-raspberry-pi/
Espruino Puck.js
https://www.tindie.com/products/gfwilliams/espruino-puckjs/
EEPROMDUINO RTC
https://www.tindie.com/products/4hackrr/eepromduino-rtc-v12/

# AdaFruit, Seeed, SparkFun, DFRobot, DigiKey
IOT Dev Kit for Mbed
https://www.seeedstudio.com/IOT-Dev-Kit-for-Mbed-(Delta-DFBM-NQ620-EVB)-p-2790.html
Illuminated Toggle Switch with Cover
https://www.adafruit.com/products/3306
Scanse Sweep
https://www.sparkfun.com/products/14117
Gravity: Flexible Piezo Film Vibration Sensor
https://www.dfrobot.com/index.php?route=product/product&product_id=1568
STSPIN32F0 Motor-Control System
http://www.digikey.com.au/en/product-highlight/s/stmicroelectronics/stspin32f0-motor-control-system

# The Cheap Side
3pcs 3S 20A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board 12.6V Cell
http://www.banggood.com/3pcs-3S-20A-Li-ion-Lithium-Battery-18650-Charger-PCB-BMS-Protection-Board-12_6V-Cell-p-1120987.html
3S 11.1V 25A 18650 Li-ion Lithium Battery BMS Protection PCB Board With Balance Function
http://www.banggood.com/3S-11_1V-25A-18650-Li-ion-Lithium-Battery-BMS-Protection-PCB-Board-With-Balance-Function-p-1120250.html
DC 12V Brushless Motor Driver Controller Board Kit For Hard Drive Motor / Pump
http://www.banggood.com/DC-12V-Brushless-Motor-Driver-Controller-Board-Kit-For-Hard-Drive-Motor-Pump-p-1120624.html
DC 8-80V 50A High Precision LiFePO / Lithium / Lead Acid Battery Tester Coulomb Counter
http://www.banggood.com/DC-8-80V-50A-High-Precision-LiFePO-Lithium-Lead-Acid-Battery-Tester-Coulomb-Counter-p-1120272.html
100KHz-1.7GHz Full-Band Software Radio HF FM AM RTL-SDR Receiver Radio Frequency Modulation Kit
http://www.banggood.com/100KHz-1_7GHz-Full-Band-Software-Radio-HF-FM-AM-RTL-SDR-Receiver-Radio-Frequency-Modulation-Kit-p-1120249.html
Battery Indicators
http://www.icstation.com/products_new.php?sort=new&page=2
ESP8266 Network WIFI Relay Module w/ TVS Protection DC 7-30V
http://www.icstation.com/esp8266-network-wifi-relay-module-protection-65x40x20mm-p-11214.html source

Raspberry Pi Compute Module 3 (CM3) aims to consumer products

Sort of announced in July 2016, the recent Raspberry Pi Compute Module 3 (CM3) is considered to arrive at the market in the near future. Last October computer system equipment producer NEC already announced a new variety of professional P and V Series large format displays that seamlessly include the RPi CM3 module. The new module, offered in 2 flavors – CM3 and CM3L (lite) – will complement the CM1 module released some years ago.

Specifications for the CM1, CM3 and CM3L SODIMM modules can be obtained from the data sheet found on the RPi website
https://www.raspberrypi.org/documentation/hardware/computemodule/RPI-CM-DATASHEET-V1_0.pdf
. Where the CM1 was driven by a BCM2835 processor (as employed on the original RPi and RPi B+ models), the CM3 sports a quad core 1.2 GHz BCM2837 central processing unit, like the RPi 3. It has 1 Gigabytes of LPDDR2 RAM and 4 Gigabytes eMMC Flash. The ‘L’ version is a CM3 not having eMMC Flash, enabling the person to hook up his/her own SD/eMMC system. The pinout of the CM1 and CM3 modules are identical but the CM3 module is one millimeter higher (31 mm).

Cost

The price of the new modules isn’t known yet, but as a CM1 retails at around £20, a comparable price could be expected for the CM3.

According to : https://www.elektormagazine.com/news/raspberry-pi-compute-module-3-cm3-to-hit-the-market-soon

Specs

The CM3 is based upon the Raspberry Pi 3 hardware and is ideal for industrial use to provide a cost-effective opportunity for folks to make customised products based upon the Pi software and hardware system. The Compute Module line is scaled-down and has less functions and ports than a standard Raspberry Pi, rendering it appropriate for Internet of Things (IoT) products.

“The module makes use of a standard DDR2 SODIMM form factor, sockets for which are made by several makers, are very easily available in the market, and additionally are inexpensive,” Raspberry Pi COO and hardware lead James Adams said in a post.

There are 2 variants of the CM3. Let’s consider the technical specs for both of them:

Standard Version:

BCM2837 central processing unit at to a maximum of 1.2GHz
1Gigabyte RAM
4Gigabyte of on-module eMMC flash

Lite Model:

BCM2837 processor at to a maximum of 1.2GHz
1GB RAM
Sdcard interface on Module pins and so a customer can wire this up to an eMMC or Sdcard of their choice

Both models can be slotted into a newly released Compute Module IO Board V3 (CMIO3) which helps you to complete the following:

Delivers required power to the CM3
Helps you to program the CM3 Standard’s flash memory or to work with an Sdcard on the Lite version.
Connect to the processor interfaces in a a little bit more friendly fashion (pin headers and flexi connectors, just like the Pi)
Offers the required HDMI and USB connectors allowing you to have an entire system that can boot Raspbian (or maybe the Operating system of your preference).

“This board gives both a starting template for those who want to design with the Compute Module, and a faster way to start tinkering with the hardware, and building and testing a system, before going to the expense of making a custom made board,” Adam said.

The older Compute Module model will still be provided, for those who don’t want the CM3’s performance boost. Based on the Raspberry Pi official magazine The MagPi:

“With several caveats, the CM3 may be used a drop-in alternative to the CM1 since they are pin compatible; the CM3 is 1mm taller, having said that, while the CPU can pull much more current from the VBAT power source line and will eventually deliver significantly more heat under heavy load.”

Prototype Circuit Card Company Positioned in Asia



We design and manufacture auto insertion machines and SMT equipment, and provide spare parts support .
We provide total solutions for LED lighting and SMT PCB assembly.
We offer worldwide Installation and on site support and factory (machine and lighting assembly) training.

1. Visit our site! : www.smthelp.com
2. Connect with us: https://www.facebook.com/autoinsertion
3. Get to know our team: https://cn.linkedin.com/in/smtsupplier
4. Google:Auto+Insertion
5. Questions? Let’s get in touch. email us at: [email protected] We design and manufacture SMT equipment in Shenzhen China;

1, LED SMT solutions : one full line (1.2m printer + 20k CPH LED mounter + 6 zone oven) price lower at usd 50K.
http://www.smthelp.com/product/led-smt-machine/

2, Odd form insertion machine:
http://www.smthelp.com/product/s-7000i-odd-form-inserter/

3, Pneumatic stencil cleaner: —No need electronic power, no fire and detonate caused; Simple operation, only Start, Stop and Reset, that is all;, Protecting Environmental, water recycle ;Lower consumption .
http://www.smthelp.com/product/stencil-cleaner-machine/

4, Spare parts support.
See why we are proud to be Southern Machinery .
http://www.smthelp.com/product/pcb-design-guideline/
1, LED Mounter
https://www.youtube.com/channel/UC4Z_P3S6qAYLHnlE-DU2OSA
2, Through hole technilogy
https://www.youtube.com/channel/UC6Pj74wjjEjtp-jneRoSL9Q
3,SMT Machine For PCB Assembly
https://www.youtube.com/channel/UCke0s_OM0eKflD8WmGSLm5A
4,Odd Form Insertion Machine/Feeder
https://www.youtube.com/channel/UCactVXP8IrU3l-vItOODRCA
5,AI SMT spare parts
https://www.youtube.com/channel/UCMuFHjsSuaIXnc3_3yNcwzw
6, Stencil Cleaner Machine Southern Machinery
https://www.youtube.com/channel/UCnMRyXlBFqJZHYuqaZVoK4Q
7,SMT pcb assembly LED
https://www.youtube.com/channel/UClX0iEG2bvJq8yUBEDamgDw

-~-~~-~~~-~~-~-
Please watch: “How to operate Auto Insertion Machine to Assembly PCB by Through hole technology”

Email: [email protected]
-~-~~-~~~-~~-~-

Source

Prototype Circuit Card Company Positioned in Asia

2-pcb-house-factory

PCBWING Technology Co., Ltd (primarily for prototype)

Based upon https://www.pcbwing.com/Aboutus.php

PCBWING Technology Co., Ltd is on the list of China’s leading company offering printed circuit board services, which is actually a partnership of three of the top ten printed circuit board manufacturers in China. Our features are quick-turn, small-scale quantity orders.
We’re a new electronics contract manufacturer in Beijing, China. We have already been specialized in printed circuit board prototype over the past 12 years. We’ve supported renowned enterprises or organizations across the world, for instance Microsoft, HP, Toshiba, Jet Propulsion Laboratory of China, Altium, University of Cambridge, University of Wisconsin, Stanford University, Harvard University, Beijing University, Siemens and China Mobile. We have economical rates, well-trained professionals and high quality fabrication expertise. We welcome customers to reach us and think about us as a efficient provider for printed circuit board fabrication services.

We provide:
Quality. Highly competitive pricing. On-time shipping.

PCBWING Technology Co., Ltd can be your excellent manufacturer for printed circuit board prototype service.

Reach out to PCBWING

Sales Office Contact:
[email protected]

Help Contact:
[email protected]

Promoting Contact: [email protected]

Mobile:
+86-15601330384

Location:
Room520A , Heqiao Plaza B Tower No.8 Guanghua Road
Chaoyang District , Beijing
China Postcode 100026

2-pcb-house-factory

STG

Based on : http://www.china-pcbassembly.com/factory-view-n100-1.html

Turk-key Circuit Card assembly solution vendor

(Serving private-label Circuit Card )

STG is a prime professional Circuit Card and PCBA manufacturer in China, which offers OEM/ODM service for worldwide shoppers . With many years of expertise, STG is not just a manufacturer, but also a specialized designer for innovative ideas, new innovations in line with buyers. Our product range contains various industries, such as electronics, telecoms, industrial products , automotive assemblies, medical equipment and so on.

Our key services include electronics and metal casing fabrication, such as printed circuit boards Circuit Card Mfg, part purchasing, Circuit Card assembly, plastic/metal house build, die-casting plus custom-made Mfg. With veteran employees here at STG well trained, their capabilities will be outstanding.

Email or call STG

China Shenzhen Office

TEL: +86-0755-27929725
FAX: +86-0755-27929724
Email address: [email protected]

Location: Huolibao Building 5F , Technology Park, Nanshan, Shenzhen, 518100, China.
Website: www.china-pcbassembly.com

Hong Kong Office

Telephone: 852-36458129
Fax: 852-36458092
Email address: [email protected]
Location: 11/F FRONT BLK,HANG LOK BLDG 130 WING LOK ST,SHEUNG WAN, Hong Kong
Web-site: www.china-pcbassembly.com .

2-pcb-house-factory

Topscom Technology Co.,Limited

Based upon : http://www.topscom.com.cn/info-132-en.html

Enterprise Profile

Two Decades Of Electronics Entire Original equipment manufacturer / ODM, Electronic Contract Manufacturing(also referred to as ECM) and Printed Circuit Board Assembly Services — Shenzhen Topscom

Topscom is a top Electronics Manufacturing Services (also known as EMS) provider centered on providing inventive design and fabricating services to car, industrial, medical, end-user, telecom, and modern technology firms. With budgetary year 2013 business earnings of 360 Mil Dollars, Topscom aids buyers design, make, delivery, and gadgets which presents buyers with overall design, engineering, and fab resources that are vertically incorporated with components to optimize their operations by decreasing their expenses and lessening the period of time to markets.

Topscom allows for an broad selection of manufacture, engineering and machining services, which include in-house highly precise SMT mount, plastic material injection shaping, high volume metal stamping, die-casting and custom manufacture.

Full-equipped Business units

Our different business units are aligned to offer you an vast range of manufacture, engineering and machining services:
Our SMT capacities take care of 0201, zero-Lead and flip-chip processes.
Our plastic injection molding dept is aligned with superior equipment in white room and cold water air conditioning system. A very special production line is even created to take out and slice the material grain.
Our metal stamping team has CNC process center, silk equipment as well as drilling equipment provided by Japan and Taiwan.
In our mold tooling team, we take advantage of Pro-Engineer expert software for helpful design assistance. Employing EROWA grips, we are able to restrain the accuracy and precision within 3 ums.
To retain qc strategy reliable, we frequently check our test flow charts. Furthermore we hold purchase office in Tokyo, Singapore and Hong Kong run by our core components storage facility in Shenzhen.

Our manufacturing area is located within Shenzhen, China with a total area of 200,000 sqms and over 4 thousand employees. We solidly have faith in the worth of our staff member and would like to uphold a expert perspective and corporate and business civilization that induces creativity and delivers job happiness.

The operations stresses successive training, open communications, teamwork and cooperation in decision-making process.

With significant knowledge of working with high-technology businesses and diversified customer base in wide product selection, we are hugely sure to supply outstanding services, high flexibleness, cost effective manufacturing solutions and timely delivery for our shoppers.

Our best rated clients list worldwide: Rda (Sydney) , Bestdl (Belgium), Sqp (France), Destst, Metro (Israel), Aji, Fujitsu, Sony (Japan), Dgsb (Malaysia), Rdi (Holland), Mlcroalp(Singapore), Inventron, Tempel (Spain), Imc (England), Cisco (United States of America).

Contact with US

Tel: +86-755-22211988
Fax:+86-755-83768890
Mailbox: [email protected]
Phone :+86 13502814037
Location: No.18, Tannan Road,Tanjia Industrial Region,Gongming Street,Shenzhen City, China.

Hong Kong Workplace:

Address : 1st Building Weigan Center JiuLong Hong Kong
Mailbox: [email protected]( Ms.Ivy Ko)

2-pcb-house-factory

EasyEDA 100 % Free Internet Based EDA Program

EasyEDA is Keen About Creativity

We’re makers, hackers and technical engineers. When we decided to design and develop several electronics a couple of years ago, we spent weeks time seeking the appropriate specialized tools. We needed schematic capture, spice simulation and PCB layout but nonetheless , we required it not to be just for Microsoft windows and we did not like the idea of needing to pay back a pile of cash to buy a massive software suite and afterwards dedicate weeks time understanding how to utilize it.

Our objective is to support creative designers move on from ideas to made prototype more speedily by offering substantial info and co-operation specialized tools for electronic design. Whether you’re a enthusiast attempting to sample your initial project or a practiced industrial engineer hunting for a efficiency lift, our aim is to eliminate the tedium in bringing a innovation to our life. We would want to hear what you’re working away on or any recommendations on the way we can help you, hence go ahead and email us.

Briefly, EasyEDA will enable you to have a less strenuous EDA experience, helping you to appreciate more of the process from an inspiration to a product.

Business Line And Prices

There aren’t any totally free business models; EasyEDA has to backup itself and thus it needs to maintain the staff at the same time.

Aiming to provide a disruptive innovation, we offer a reliable 100 % free web based EDA software, but yet we make an effort to earn an income from various other services, that include delivering PCB deals, PCB assy, ads and special project reviews by our certified electronic engineers.

Please take advantage of EasyEDA, we promise EasyEDA’s core features are totally free to every one.

Reach Out to Us

Address:

30A, Area A, Shennan Garden Bldg, Nanshan, Shenzhen City, Guangdong Province
Zipcode: 518000

Business development/collaboration:
[email protected]

Various other inquiries:
[email protected]

Older posts Newer posts

© 2019 PCB Prototype

Up ↑