PCB Prototype

Rapid PCB Prototype Service

Tag: tutorial (page 1 of 4)

Raspberry Pi 3 Tutorial: Connecting Breadboard and LEDs



This video demonstrates how to attach a breadboard to a Raspberry Pi 3 with optional touchscreen. LED lights are then installed on the breadboard and turned on/off via the WiringPi software.

Hardware tips:
* Disconnect power to your Raspberry Pi before attempting this tutorial.
* Do not connect LEDs directly to the breadboard rows that are already in use by the T cobbler. Use the lower rows that are free.
* The positive pin (longer leg) of the LED connects in the same numbered row (different letter) as the jumper wire.
* The negative pin (shorter leg) of the LED connects in the same numbered row (different letter) as one end of the resistor.
* The other end of the resistor connects in the negative column on the edge of the breadboard (any row).
* The other end of the jumper wire connects in the same row (any lettered column) as the desired GPIO pin as indicated on the T cobbler.

Example pins:
Connect LED 1 positive leg to breadboard row 30, column E
Connect LED 1 negative leg to breadboard row 29, column E
Connect LED 2 positive leg to breadboard row 28, column E
Connect LED 2 negative leg to breadboard row 27, column E
Connect LED 3 positive leg to breadboard row 26, column E
Connect LED 3 negative leg to breadboard row 25, column E
Connect Resistor 1 leg 1 to breadboard row 29, column C
Connect Resistor 1 leg 2 to breadboard 3V negative column, any unused row
Connect Resistor 2 leg 1 to breadboard row 27, column C
Connect Resistor 2 leg 2 to breadboard 3V negative column, any unused row
Connect Resistor 3 leg 1 to breadboard row 25, column C
Connect Resistor 3 leg 2 to breadboard 3V negative column, any unused row
Connect Jumper 1 end 1 to breadboard row 30, column A
Connect Jumper 1 end 2 to the breadboard row that aligns with GPIO 17 (pin 11) on the T cobbler, column C
Connect Jumper 2 end 1 to breadboard row 28, column A
Connect Jumper 1 end 2 to the breadboard row that aligns with GPIO 27 (pin 13) on the T cobbler, column C
Connect Jumper 3 end 1 to breadboard row 26, column A
Connect Jumper 1 end 2 to the breadboard row that aligns with GPIO 22 (pin 15) on the T cobbler, column C

To install WiringPi, follow the instructions at http://wiringpi.com/download-and-install/

To change the orientation of the Raspberry Pi Touchscreen and to flip it upside down, add the following line to /boot/config.txt:

lcd_rotate=2

The commands to control the LEDs are as follows.

To set the pins to Output mode:
gpio -g mode 17 out
gpio -g mode 27 out
gpio -g mode 22 out

To turn the LEDs on:
gpio -g write 17 1
gpio -g write 27 1
gpio -g write 22 1

To turn the LEDs off:
gpio -g write 17 0
gpio -g write 27 0
gpio -g write 22 0

Note: the ending 2 in the “gpio -g write 22 2” command in the video is a typo.

Check http://blog.brianguy.com for additional notes.
Follow @brianguy_cloud on Twitter.

source

Raspberry Pi Alternate Options: Why They’re a Better Buy

Raspberry Pi is not the baddest small PC throughout the world, and it’s what its contenders are seeking to tell the remaining of the world. Now and then, a new mini computer is released on the market promising to be the largest one to overcome Raspberry Pi. The reality is, there’s a new Raspberry Pi killer known as NanoPi M1 Plus, which is Ubuntu-Linux ready and is priced at $30.

The Raspberry Pi is launched with four variations in recent years. These comprise of Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most current which is Pi 3 Model B.

Pi 3 was established to make sure Raspberry Pi has the ability to meet anybody with a low cost PC for programming. It’s improved CPU with the Cortex A53, Hackaday mentioned, and runs on 1.2 GHz. At $35, the Raspberry Pi is the most sought-after of all.

The Raspberry Pi, but bear in mind, is not the single single board computer(SBC) for homebrewed projects. There are many more out there which are less expensive, and then some that can do more than Raspberry Pi for a bit more, ZD Net noted.

Firstly, there’s the Omega 2, which has a modular nature empowering software engineers to add Bluetooth or Gps unit without problems. It has constructed in Wi-Fi and flash storage space; the Operating-system is Linux distro on top of the OpenWrt system. The Omega 2 is priced at $5 and can even run on FreeBSD Operating-system, which explains why it is good for college students.

The BBC Micro:bit is priced at $16 and is suitable for learners for their learning and prototyping projects. A 32-bit ARM Cortex processor drives it from inside and it is different from the remainder as a result of 5×5 LED matrix. This benefit offers 25 independently programmable red-colored LEDs for basic output.

In addition, there is the BeagleBone Black, which is priced at $55 and just like the Raspberry Pi, is yet another community-supported platform both for hobbyists and programmers. It really works super fast; it could boost Linux in under 10-seconds and can develop in within 5 min’s. It’s driven by AM335x 1GHz ARM Cortex-A8 coupled with 512MB DDR3 RAM.

Someone else is the NanoPi M1 Plus, that has been known as as the new Raspberry Pi killer. At $30, it promises to have a more robust layout and design and was capable to put in beneficial attributes like Wi-Fi and Wireless BT. Further, it includes an IR receiver, mic, 8GB storage space, and power and reset switches.

Nevertheless, the best attribute of NanoPi M1 Plus is its power to run Ubuntu-Mate, Ubuntu-Core, and also Debian, Beta News mentioned. It is made for firm users, developers, collectors, and learners.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Find out more on official site: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

There’s a new Raspberry Pi rival that is quite economical. Actually, a lot of people might see it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an certainly superior layout and design, and valuable incorporated features including Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Raspberry Pi – Tutorial 3B – Installing Berry Boot



This tutorial is a followup to Part 3, how to install an Operating System to your SD card. In this tutorial, I show you how to use Berry Boot to try out multiple OSes and make the install process a lot easier.

Zip File Download: http://sourceforge.net/projects/berryboot/files/ (get the zip file with the most recent date)

More info about Berry Boot: http://www.berryterminal.com/doku.php/berryboot

source

Raspberry Pi Substitutes: The Reason They’re a Greater Buy

Raspberry Pi is not the baddest tiny PC on the planet, and it is what its contenders are endeavoring to explain to the rest of the world. Now and then, a fresh mini computer is launched on the market promising to be the biggest one to beat Raspberry Pi. The reality is, there exists a new Raspberry Pi killer known as NanoPi M1 Plus, which is Ubuntu-Linux ready and costs you $30.

The Raspberry Pi is presented with 4 versions over the years. Examples of these are Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most recently released which is Pi 3 Model B.

Pi 3 was made to make perfectly sure that Raspberry Pi could gratify anyone with a well priced PC for programming. It has replaced CPU with the Cortex A53, Hackaday noted, and runs on 1.2 GHz. Costing $35, the Raspberry Pi is the most desired of all.

The Raspberry Pi, nevertheless, is not the merely single board computer(SBC) for homebrewed projects. There are tons more out there that entails lower cost, and then some that can do more than Raspberry Pi for a little more, ZD Net published.

First off, there’s the Omega 2, having a modular nature permitting computer programmers to attach Bluetooth or Gps unit comfortably. It has in-built Wi-Fi and flash memory space; the Operating-system is Linux distro originated from the OpenWrt system. The Omega 2 costs $5 and can easily operate on FreeBSD Operating system, which is why it really is created for college students.

The BBC Micro:bit costs $16 and is appropriate for school students for their learning and prototyping projects. A 32-bit ARM Cortex processor chip drives it from inside and it stands out from the rest because of the 5×5 LED matrix. This benefit provides 25 individually programmable red-colored Led lights for basic output.

Similarly, there is the BeagleBone Black, which costs $55 and just like the Raspberry Pi, is yet another community-supported platform both for hobbyists and builders. The system functions speedy; it can certainly boost Linux in below Ten seconds and can develop in under 5 min’s. It is actually powered by AM335x 1GHz ARM Cortex-A8 plus 512MB DDR3 RAM.

Someone else is the NanoPi M1 Plus, which has been referred to as as the new Raspberry Pi killer. At $30, it promises to have a tougher design and layout and was capable to merge essential benefits just like Wi-Fi and Bluetooth. In addition, it features an IR receiver, mic, 8GB storage area, and power and reset buttons.

However, the top function of NanoPi M1 Plus is its ability to run Ubuntu-Mate, Ubuntu-Core, as well as Debian, Beta News explained. It is created for business users, coders, enthusiasts, and school students.

nanopi m1 plus specs

FriendlyElec roll-outs Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi alternative

Read more on official web site: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

You will find there’s new Raspberry Pi opponent that is quite cost-effective. In fact, many people might see it as a Pi alternative. The $30 FriendlyElec NanoPi M1 Plus has an arguably superb design and layout, and additionally essential built in features like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

✅ Arduino en Impreso o Protoboard / Breadboard (Fácil de hacer) Tutorial



Como crear un Arduino fuera de la placa original, en un impreso o mini protoboard / breadboard.

Tienda donde lo compre: http://dinastiatecnologica.com/producto/atmega-328p-pu-precargado-con-bootloader-para-arduino/

Como grabar el bootloader: https://www.youtube.com/watch?v=6N5fThEB9nc&index=6&list=PLnwu2s7SIakRdUZ5IPFEenyMFDc5_1j6H

Pagina oficial : http://elprofegarcia.com/

Lista de materiales ( http://dinastiatecnologica.com/ )

1 Microcontrolador 328P-PU
1 Regulador 7805
1 Resistencia 10K ohmios
1 Condensador electrolitico 100uf 16Vdc
1 Mini Protoboard
Cables de conexion Jumper
1 Bateria 9Vdc
1 Porta Baterias
Dinastía Tecnologica

source

Circuit Board Fabricating in the Spanish Mainland

PCBYA

We’re a beginning spanish corporation featuring excellent quality and unrivaled prices in manufacturing of Circuit Boards.
We serve the prototyping amateurs as well as the industry. We’re authorities in very short timings therefore we have the ability to deliver the boards in the same day we obtain the Gerbers, if you want to.
We’re nearly always growing, and usually add new materials as well as technologies in the producing process.

Charge Online Calculator

http://pcbya.com/en/calculator.php

Commonly asked questions

Technology

What format of Gerber and Drill files do you accept?

We approve Gerbers from all the Cad Computer softwares, simply just output them in RS-274-X format. The drills file should be Excellon1 or 2 compatible.

What makes the prototypes prices so economical? Aren’t there a fix cost of tooling?

We now have designed,developed and produced our own equipment consequently we’re able to contest with other countries (for example China,Bulgaria,etcetera..) in which mortgages and costs are greatly lower. In PCBYA you cannot find any tooling cost.

Shipping

How much does it cost shipping to my region?

Makes use of the online calculator just above for information of the shipment.
When your country is not there, send us a mail.

Payment

What is the payment method?

The payment method is pay pal,which enables you to pay readily with VISA,MASTERCARD,and so forth with your currency.
Each time you buy a board, we send an email with a paypal link in which it is possible to pay in a safeguarded way, next paypal will notify us of your payment and we commence the production of your Circuit Board.

Derived from http://pcbya.com/en/whoweare.php

Eagle, todos los pasos desde el diseño del PCB a la fabricación de un Arduino



Blog: http://giltesa.com/?p=16734

source

PCB Board Fabrication in the Spanish Mainland

PCBYA

We’re a startup spanish firm presenting top quality and unequalled prices in manufacturing of PCB Boards.
We serve the prototyping lovers as well as the industry. We’re pros in very short timings and then we are able to ship the boards in the same day we get the Gerbers, if you desire to.
We’re always growing, and in most cases bring in innovative materials and technologies in the producing process.

Price Calculator

http://pcbya.com/en/calculator.php

Commonly asked questions

Technology

What format of Gerber and Drill files do you agree to?

We agree to Gerbers from all the Cad Programs, basically export them in RS-274-X format. The drills file need to be Excellon1 or 2 compatible.

Precisely why are the prototypes prices so super-cheap? Aren’t there a fix cost of tooling?

We now have designed,developed and manufactured our own machinery which means that we can easily contend with other countries (including China,Bulgaria,and so on..) where mortgages and costs are a great deal lower. In PCBYA there’s no tooling cost.

Delivery

Simply how much does it cost shipping to my country?

Make use of the online calculator earlier mentioned for information about the shipment.
When your country is not there, send us a e-mail message.

Payment method

What is the payment method?

The payment method is paypal,so you can pay readily with Visa cards,Master card,etcetera with your currency.
When you buy a board, we send a message with a paypal weblink where you can easily pay in a safe and sound way, and then paypal will notify us of your payment and we start the manufacturing of your PCB Board.

Founded on http://pcbya.com/en/whoweare.php

Raspberry PI tftp DHCP server Debian Raspbian CISCO tutorial fix



Weekend project – #Linux video tutorial 🙂 #RasPI #RaspberryPI #Raspberry #Debian #Wembin #tftp #Jessie #Raspbian #Asterisk #freePBX #DHCP #Tutorial
INSTALL WEBMIN: go for latest version and instructions http://www.webmin.com/deb.html and copy and paste install codes. You might want to use sudo if you’re not root.
——————————————————————
From Webmin click to install DHCP server
——————————————————————
INSTALL TFTP SERVER
sudo apt-get install tftpd-hpa
edit settings using command:
sudo nano /etc/default/tftpd-hpa
Make sure your file looks like this:
TFTP_USERNAME=”tftp”
TFTP_DIRECTORY=”/tftpboot”
TFTP_ADDRESS=”0.0.0.0:69″
TFTP_OPTIONS=”-4 –create –secure”
——————————————————————
Upload phone loads to /tftpboot
——————————————————————
chmod 777 or 755 depends of the installation and you’re done.

source

5 Most Beneficial: Linux on a Chromebook, building DNS servers, VoIP on Raspberry Pi, and others

With regard to this week’s Top 5, we spotlight putting Linux on a Chromebook, building your special DNS name servers, creating a VoIP (voice over IP) solution on a Raspberry Pi, comparing Python and Ruby for web design, and the top five development languages for DevOps.

5 Most Beneficial content of the week

5. Top 5 programming languages for DevOps
4. Python vs. Ruby: Which can be best for web design?
3. Ways to install Asterisk on the Raspberry Pi
2. Create your private DNS name server on Linux
1. Running Linux on your Chromebook with GalliumOS

See more details on opensource.com/article/17/4/top-5-april-14

The best ways to mount Fedora 25 on your Raspberry Pi

Continue reading about the first formally supported release of Fedora for the Pi.
In Oct . 2016, the launch of Fedora 25 Beta was announced, along with initial support for the Raspberry Pi 2 and 3. The last “general availability” version of Fedora 25 was introduced 1 month later, and subsequently I have been playing around with the various Fedora spins for the most recent versions of the Raspberry Pi.

This article is not as much a review of Fedora 25 on the Raspberry Pi 3 as a collection of tricks, screenshots, along with my own individual thoughts on the first formally supported version of Fedora for the Pi.

See details on opensource.com/article/17/3/how-install-fedora-on-raspberry-pi

Video Tutorial para realizar circuitos impresos con hojas de transferencia Steren PNP-010



Video que muestra la manera en como realizar circuitos impresos, utilizando hojas de transferencia Steren de una manera profesional y muy sencilla.

http://www.steren.com.mx/catalogo/prod.asp?p=2706

source

Circuit Card Manufacture in Spain

PCBYA

We are a start-up spanish corporation presenting top quality and unparelled prices in producing of Circuit Cards.
We serve the prototyping amateurs as well as the industry. We are authorities in very short timings and then we can easily send the boards in the same day we get the Gerbers, if you’d like to.
We are continuously improving, and usually add in new materials and technologies in the manufacturing process.

Cost Online Calculator

http://www.pcbya.com/en/calculator.php

Frequently asked questions

Technology

What format of Gerber and Drill files do you allow?

We agree to Gerbers from all the Cad Software programs, just simply output them in RS-274-X format. The drills file ought to be Excellon1 or 2 compatible.

Exactly why are the prototypes prices so super-cheap? Aren’t there a fix cost of tooling?

We have designed,developed and produced our own machines so we’re able to compete with other countries (such as China,Bulgaria,and so forth..) where mortgages and costs are significantly lower. In PCBYA there is no tooling cost.

Shipping charges

How much does it cost shipping to my region?

Make use of the online calculator just above for information about the shipment.
In the event your country is not there, send us a e-mail.

Payment method

What is the payment method?

The payment method is pay pal,so you can pay effectively with VISA,Master card,and so on with your currency.
Every time you order a board, we send an e-mail with a paypal link where it is possible to pay in a protected way, next paypal will notify us of your payment and we begin the manufacture of your Circuit Card.

Founded upon http://www.pcbya.com/en/whoweare.php

Como Crear Circuitos Electrónicos Impresos o PCB con PROUTEUS [PCB] [TUTORIAL COMPLETO]



Como crear un circuito electronico impreso o PCB con los programas de ISIS y ARES de PROTEUS 7.7. Se explica desde la simbologia hasta la creacion de layout.

Links renovados!!!

Como Descargar e Instalar PROTEUS 7 en Cualquier Windows [2014] [FULL] [TUTORIAL] : https://www.youtube.com/watch?v=l_FmCW3aO94&list=UUbCZzTdZhQI6YzC1H_UKXHA&index=5

Como Descargar e Instalar Proteus 8 [TUTORIAL] [2014] [EXELENTE EXPLICACION] : https://www.youtube.com/watch?v=ZoDZ9T_vZcE&index=3&list=UUbCZzTdZhQI6YzC1H_UKXHA

LINKS RENOVADOS NOV. 2016
Descarga de Live Wire y PCB Wizard:https: http://www.linkbucks.com/ByStO
Live Wire y PCB Wizard PORTABLES: http://www.linkbucks.com/ByScp
Descarga PDF Creator: http://www.linkbucks.com/BySYf

MAS VIDEOS SOBRE PCB Y ELECTRONICA!!!

Programas para crear circuitos electrónicos impresos [ PCB ] TUTORIAL : https://www.youtube.com/watch?v=3RFxmoW5jFU&index=9&list=UUbCZzTdZhQI6YzC1H_UKXHA

Programas para crear circuitos electrónicos impresos [PCB] [Método Avanzado] [TUTORIAL] HD: https://www.youtube.com/watch?v=o6_Gt8bXqCw

Como Imprimir Archivos PCB Wizard de La Mejor Manera [TUTORIAL] HD: https://www.youtube.com/watch?v=8aORQK83pSw

EXTRA!!! Como descargar e instalar WinRar para cualquier versión de Windows [2014]: https://www.youtube.com/watch?v=E_gmmJZUarY

Como simular Arduino en PROTEUS!!! : https://www.youtube.com/watch?v=qP7_xFsMf3Q&list=UUbCZzTdZhQI6YzC1H_UKXHA

Como Simular un PIC o Microcontrolador en Proteus 8 [TUTORIAL COMPLETO] : https://www.youtube.com/watch?v=PhbIlsvHE9g&index=1&list=UUbCZzTdZhQI6YzC1H_UKXHA

Como limpiar una tableta PCB de Polvos o Líquidos [TUTORIAL COMPLETO] [2014] : https://www.youtube.com/watch?v=PQejAB6IrkE&list=UUbCZzTdZhQI6YzC1H_UKXHA&index=2

source

Electronic Board Manufacturing in Spain

About PCBYA

We are a new spanish company delivering best quality and amazing prices in producing of Electronic Boards.
We serve the prototyping hobbyists and also the industry. We are pros in very short timings and then we are able to ship the boards in the same day we get the Gerbers, if you wish to.
We are nearly always growing, and frequently bring in new materials and technologies in the manufacturing process.

Cost Calculator

http://www.pcbya.com/en/calculator.php

FAQ

PCB File

What format of Gerber and Drill files do you settle for?

We agree to Gerbers from all of the Cad Programs, basically output them in RS-274-X format. The drills file must be Excellon1 or 2 compatible.

What makes the prototypes prices so low-priced? Aren’t there a fix cost of tooling?

We’ve designed,developed and manufactured our own machinery consequently we can easily contest with other countries (like China,Bulgaria,etc..) in which mortgages and costs are greatly lower. In PCBYA there’s certainly no tooling cost.

Shipping charges

Just how much does it cost shipping to my region?

Make use of the online calculator just above for information about the shipment.
In the event your country is not there, send us a mail.

Payment

What’s the payment method?

The payment method is pay pal,so you’re able to pay simply with VISA,MASTERCARD,etc with your currency.
Each time you order a board, we send an e-mail with a paypal weblink in which you’ll be able to pay in a safe way, then paypal will alert us of your payment and we begin the manufacture of your Electronic Board.

Derived from http://www.pcbya.com/en/whoweare.php

COMO FABRICAR UNA PLACA DE CIRCUITO IMPRESO PCB CON PLASTICO RECICLADO



La primera PCB con plástico RECICLADO, a partir de aquí aparecerán mucha mas, pero esta fue la primera.
Visita mi web www.reparatumismo.org autor: Carlos López.

source

Printed Circuit Board Manufacturing in Spain

About PCBYA

We are a start-up spanish company featuring top quality and unequalled prices in fabrication of Printed Circuit Boards.
We serve the prototyping fans as well as the industry. We are professionals in very short timings and so we can deliver the boards in the same day we obtain the Gerbers, if you want to.
We are constantly developing, and frequently add in new materials and technologies in the production process.

Cost Online Calculator

http://www.pcbya.com/en/calculator.php

Commonly asked questions

PCB File

What format of Gerber and Drill files do you settle for?

We allow Gerbers from all the Cad Software packages, simply export them in RS-274-X format. The drills file ought to be Excellon1 or 2 compatible.

How come the prototypes prices so economical? Aren’t there a fix cost of tooling?

We’ve designed,developed and produced our own equipment as a result we are able to contest with other countries (such as China,Bulgaria,and so on..) in which mortgages and costs are substantially lower. In PCBYA there is absolutely no tooling cost.

Shipping charges

How much does it cost shipping to my country?

Utilize the online calculator in this article for info about the shipment.
If your country is not there, send us a mail.

Payment

What’s the payment method?

The payment method is paypal,which enables you to pay quite simply with Visa cards,MASTERCARD,and many others with your currency.
Each time you purchase a board, we send a message with a paypal link in which you can pay in a safeguarded way, after that paypal will alert us of your payment and we get started the production of your Printed Circuit Board.

In line with http://www.pcbya.com/en/whoweare.php

Fabricación de circuitos impresos con el método de serigrafía



Este video es complemento del turorial que se encuentra en http://construyasuvideorockola.com/fabricacion_impresos_03.php
Nota: los tiempos de revelado y de secado de las tarjetas, cambian dependiendo de la calidad de la tinta, del tipo de bombillo y distancia de la luz, al exponer las tarjetas. Recomendamos hacer pruebas.

source

COMO FABRICAR PLACAS DE CIRCUITO IMPRESO EN CASA. (PROCESO COMPLETO)


 
INFORMACION EN BASE A LAS PREGUNTAS:

-NO SE PUEDE USAR UNA IMPRESORA NORMAL DE TINTA, SOLO IMPRESORA LASER QUE USEN TONER, O FOTOCOPIADORA.

-EL PAPEL TIENE QUE SER SATINADO, ES DECIR BRILLANTE, TIPO AL QUE USAN EN LAS REVISTAS, GRAMAJE DE 80 MINIMO, DE MENOS PUEDE QUEDARSE ATASCADO EN LA IMPRESORA.

-EL SOFT USADO, ES EL CIRCUIT WIZARD, PERO ESO ES INDIFERENTE, SIRVE CUALQUIER PROGRAMA DE CAD.

-YO ATACO CON: ACIDO CLORHIDRICO/AGUA OXIGENADA DE 110Vol/AGUA DEL GRIFO, TODO A PARTES IGUALES. LOS PRODUCTOS SON FACILES DE CONSEGUIR EN SUPERMERCADOS (ACIDO). ALMACENES DE PRODUCTOS DE PELUQUERIA (AGUA OXIGENADA DE 110Vol.) TAMBIEN PODEIS IR A FARMACIAS; PERO SALE MUY CARA, MEJOR USAR EL AGUA OXIGENADA DE LA QUE USAN EN LA PELUQUERIA PARA DECOLORACIONES.

-TALADROS EN LA PCB, CON UNA MINI TALADRADORA TIPO DREMEL, O SIMILAR, BROCA DE 0.8mm o 1mm.

--------------------------------------------------------------------------------------------------------------------------------
 En este video describo los pasos a seguir para llegar a buen puerto con el proceso de fabricacion de placas de C.I.

El proceso es bastante sencillo y los reultados son muy buenos. Con una simple impresora laser (la mia es la mas barata que existia, 49€ o algo menos, una ML-1660), una plancha y el papel adecuado (ojo el truco esta en el papel) podemos conseguir un resultado EXCELENTE.

En el video esta todo el proceso a tiempo real.. con las pausas de esperas y cuando he necesitado dos manos :D

Espero que os sea util.

Un saludo.
 
source
Older posts

© 2017 PCB Prototype

Up ↑