PCB Prototype

Rapid PCB Prototype Service

Tag: Raspbian (page 1 of 2)

1. Raspberry pi 3 connection with laptop without a monitor and a router, tutorial



Hey guys!
It is my first video about raspberry pi. I decided to make it because when I received my raspberry I did’t have opportunity to connect a monitor or keyboard because I study in different country and I have just laptop with my.

I included few part to this video, it is describing how to download raspbian, how to write it to sd card and how to use DHCP of windows, so you don’t need to have a router, and last it is how to connect to raspberry pi by ssh.

Please leave comment below if you have a suggestion or have found a mistake. Thanks, hope it is useful for someone =)

source

Raspberry Pi Alternatives: Precisely Why They’re a Greater Buy

Raspberry Pi isn’t the baddest micro computer in the market, and it is what its competitors are wanting to convey to the rest of the world. Now and then, a fresh mini computer is introduced in the marketplace promising to be the largest one to overcome Raspberry Pi. To put it accurately, there exists a new Raspberry Pi killer named NanoPi M1 Plus, which is Ubuntu-Linux ready and is priced at $30.

The Raspberry Pi is released with 4 versions in recent years. These include Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most up-to-date which is Pi 3 Model B.

Pi 3 was made to make sure that Raspberry Pi can delight a person with a lower priced computer for programming. It’s up-graded Processor with the Cortex A53, Hackaday declared, and runs on 1.2 GHz. At $35, the Raspberry Pi is the most well-known of all.

The Raspberry Pi, nonetheless, isn’t the solely single board computer(SBC) for homebrewed projects. There are plenty more available that cost less, and then some that can do more than Raspberry Pi for a little bit more, ZD Net published.

For a start, there is the Omega 2, which includes a modular nature which allows programmers to incorporate Wireless bluetooth or Navigation systems rapidly. It has in-built Wi-Fi and flash memory space; the Operating-system is Linux distribution founded on the OpenWrt system. The Omega 2 is priced at $5 and can even run on FreeBSD Operating-system, which is why it’s suitable for learners.

The BBC Micro:bit is priced at $16 and is good for learners for their learning and prototyping projects. A 32-bit ARM Cortex processor drives it from inside and it is different from the remainder due to its 5×5 LED matrix. This function offers 25 separately programmable red-colored Led lights for basic output.

There is also the BeagleBone Black, which is priced at $55 and similar to the Raspberry Pi, is in addition a community-supported platform both for hobbyists and designers. It truely does work speedy; it can actually boost Linux in lower than 10 seconds and can develop in below 5 minutes. It’s driven by AM335x 1GHz ARM Cortex-A8 coupled with 512MB DDR3 RAM.

One more is the NanoPi M1 Plus, that has been dubbed as the most current Raspberry Pi killer. At $30, it promises to have a more robust design and layout and was capable to combine very important attributes for instance Wi-Fi and Wireless bluetooth. In addition, it contains an Infrared receiver, microphone, 8GB memory, and power and reset control buttons.

However, the most useful element of NanoPi M1 Plus is its capability to run Ubuntu-Mate, Ubuntu-Core, and also Debian, Beta News suggested. It is of great help for venture users, developers, hobbyists, and learners.

nanopi m1 plus specs

FriendlyElec introduces Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi substitute

Know more on official webpage: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

You will find a new Raspberry Pi contender that is quite economical. To put it accurately, some individuals might see it as a Pi substitute. The $30 FriendlyElec NanoPi M1 Plus has an arguably superior design and layout, as well as crucial incorporated features just like Wi-Fi and Bluetooth.

https://www.betanews.com/2017/03/02/friendlyelec-linux-debian-ubuntu-nanopi-m1-plus-raspberry-pi/

Setup BitCoin ASIC Mining On Raspberry Pi (Raspbian)



How to Set up BFGMiner on the Raspbian on the Raspberry Pi.
Use your USB ASICs with the Low power Raspberry Pi, to get maximum efficiency for power to BTC.

The Rasbian OS does not contain a lot of support for this sort of thing so you need to follow this guide:

Step 0 :
To set-up find out the IP address then SSH into it using PuTTY:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html

Step 1: Update to latest Version
sudo aptitude update
sudo aptitude upgrade

Step 2: Install Librarys
sudo apt-get install libusb-1.0-0-dev libcurl4-gnutls-dev libjansson-dev uthash-dev libncurses5-dev libudev-dev autoconf automake libtool pkg-config screen

Step 3: Get BFGMiner
git clone git://github.com/luke-jr/bfgminer
(use: ls to find where it is)
cd bfgminer

Step 4 Configure the Software for Compiling
./autogen.sh
./configure
make
(optional: then use sudo make install to have it system wide. Not advised)

Step 5:Run BFGMiner
(stay in the bfgminer software then use below command changing caps to your settings.)

screen -S Mining ./bfgminer -o stratum+tcp://POOL.com:PORT -u USER -p PASSWORD

Step 6: Using Screen
then to do something else hit
Ctrl A D

and to get back to it use
screen -ls to see your running screens
then screen -r 0000 to get back to your screen

However If you are using Nanofury/Ice Fury you need HIDAPI which is VERY hit and miss and more likely miss than hit at the moment.
git clone git://github.com/signal11/hidapi
cd hidapi
./bootstrap
./configure
make
sudo make install
sudo ldconfig
However this still might not work so check out video tomorrow on Minepeon:

My pool: http://full.sc/1tmZveB
Donations/tips:
BTC: 14uUbzJSi2t5MGgYH72PdTonD22V8drBVN
Doge: DTHbar4BRRmxx2YBjkYj23epzJG7Z2g5cx
Google+ : https://plus.google.com/+Tingawinga5
Facebook: http://www.facebook.com/tingawinga5
Folding@home team: 123464
Twitter: http://www.twitter.com/tingawinga
SubReddit: http://www.reddit.com/r/TingaWinga/
Website: http://www.tingawinga.co.uk Buy Stuff Here: http://bit.ly/2oRV8i9

source

Raspberry Pi Alternate Options: The Reason They Are a Greater Buy

Raspberry Pi is not the baddest mini computer on the planet, and it is what its contenders are endeavoring to inform the remaining of the world. Now and then, a new mini computer is launched in the marketplace promising to be the largest one to defeat Raspberry Pi. In actual fact, you will find there’s new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and costs $30.

The Raspberry Pi is presented with four models throughout the years. Examples of these are Raspberry Pi Model B+, Pi 2 Model B, Zero, and the newest which is Pi 3 Model B.

Pi 3 was made to confirm that Raspberry Pi has the potential to fulfill a person with a lower priced computer for computer programming. It’s upgraded CPU with the Cortex A53, Hackaday explained, and runs on 1.2 GHz. Costing $35, the Raspberry Pi is the hottest-selling of all.

The Raspberry Pi, on the other hand, is not the sole single board computer(SBC) for homebrewed projects. There are a variety more out there that entails lower cost, and then some that can do more than Raspberry Pi for a little more, ZD Net reported.

For starters, there’s the Omega 2, sporting a modular nature enabling developers to incorporate Bluetooth or Gps unit without problems. It has internal Wi-Fi and flash storage; the Operating system is Linux distro founded upon the OpenWrt system. The Omega 2 is priced at $5 and can also operate on FreeBSD Operating system, and that is why it is really perfect for college students.

The BBC Micro:bit is priced at $16 and is ideal school students for their studying and prototyping projects. A 32-bit ARM Cortex processor energizes it from inside and it sticks out from the competition because of the 5×5 LED matrix. This feature provides 25 singularly programmable red Led lights for basic output.

There is also the BeagleBone Black, which is priced at $55 and like the Raspberry Pi, is additionally a community-supported platform both for enthusiasts and coders. It truly does work fast; it can certainly boost Linux in under Ten seconds and can develop in under 5 min’s. It is motorized by AM335x 1GHz ARM Cortex-A8 coupled with 512MB DDR3 RAM.

Another one is the NanoPi M1 Plus, that has been known as as the new Raspberry Pi killer. Priced at $30, it promises to have a better quality design and layout and was capable to add vital benefits similar to Wi-Fi and Bluetooth. In addition, it features an Infrared receiver, microphone, 8GB storage area, and power and reset buttons.

However, the perfect attribute of NanoPi M1 Plus is its power to run Ubuntu-Mate, Ubuntu-Core, and in addition Debian, Beta News described. It is excellent for business users, programmers, amateurs, and school students.

nanopi m1 plus specs

FriendlyElec rolls out Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi substitute

Get more information on official webpage: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

You will find there’s new Raspberry Pi rival that is quite affordable. In actual fact, a number of people might consider it as a Pi substitute. The $30 FriendlyElec NanoPi M1 Plus has an arguably remarkable design and layout, as well as critical built-in features such as Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Linphone Raspbian + Asterisk



Voilà un petit essai de portier vidéo sous raspbian.

Matériel :
Un raspberry B
Une webcam Logitech C170 avec Micro Intégré
http://www.amazon.fr/KitSound-Enceinte-compatible-appareils-Android/dp/B0069MWN26
Raspbian Installé
Linphone Installé

Sur la vidéo à droite
1 fenêtre SSH avec alsamixer pour régler le volume
1 fenètre avec linphonecrc pour simuler un appel de la rue

Sur la vidéo à Gauche
Un Linphone sur un PC, mais cela aurait pu être sur un GSM

source

5 Best: Linux on a Chromebook, building DNS servers, VoIP on Raspberry Pi, and others

On the subject of this week’s Top 5, we highlight putting Linux on a Chromebook, building your own personal DNS name servers, creating a VoIP (voice over IP) solution on a Raspberry Pi, evaluating Python and Ruby for website development, and the top 5 development languages for DevOps.

5 blog posts of the week

5. Top 5 computer programming languages for DevOps
4. Python vs. Ruby: Which is most suitable for website development?
3. Tips on how to install Asterisk on the Raspberry Pi
2. Build up your personal DNS name server on Linux
1. Running Linux on your Chromebook with GalliumOS

See more details on opensource.com/article/17/4/top-5-april-14

The right way to mount Fedora 25 on your Raspberry Pi

Read more about the very first officially supported release of Fedora for the Pi.
In Oct . 2016, the launch of Fedora 25 Beta was announced, coupled with initial support for the Raspberry Pi 2 and 3. The final “general availability” version of Fedora 25 was released four weeks later, and since then I have been playing around with the many Fedora spins intended for the most recent versions of the Raspberry Pi.

This post is not as much a review of Fedora 25 on the Raspberry Pi 3 as a variety of suggestions, screenshots, as well as my own individual thoughts on the first officially supported version of Fedora for the Pi.

See details on opensource.com/article/17/3/how-install-fedora-on-raspberry-pi

Raspberry PI tftp DHCP server Debian Raspbian CISCO tutorial fix



Weekend project – #Linux video tutorial 🙂 #RasPI #RaspberryPI #Raspberry #Debian #Wembin #tftp #Jessie #Raspbian #Asterisk #freePBX #DHCP #Tutorial
INSTALL WEBMIN: go for latest version and instructions http://www.webmin.com/deb.html and copy and paste install codes. You might want to use sudo if you’re not root.
——————————————————————
From Webmin click to install DHCP server
——————————————————————
INSTALL TFTP SERVER
sudo apt-get install tftpd-hpa
edit settings using command:
sudo nano /etc/default/tftpd-hpa
Make sure your file looks like this:
TFTP_USERNAME=”tftp”
TFTP_DIRECTORY=”/tftpboot”
TFTP_ADDRESS=”0.0.0.0:69″
TFTP_OPTIONS=”-4 –create –secure”
——————————————————————
Upload phone loads to /tftpboot
——————————————————————
chmod 777 or 755 depends of the installation and you’re done.

source

5 Most Beneficial: Linux on a Chromebook, building DNS servers, VoIP on Raspberry Pi, and others

With regard to this week’s Top 5, we spotlight putting Linux on a Chromebook, building your special DNS name servers, creating a VoIP (voice over IP) solution on a Raspberry Pi, comparing Python and Ruby for web design, and the top five development languages for DevOps.

5 Most Beneficial content of the week

5. Top 5 programming languages for DevOps
4. Python vs. Ruby: Which can be best for web design?
3. Ways to install Asterisk on the Raspberry Pi
2. Create your private DNS name server on Linux
1. Running Linux on your Chromebook with GalliumOS

See more details on opensource.com/article/17/4/top-5-april-14

The best ways to mount Fedora 25 on your Raspberry Pi

Continue reading about the first formally supported release of Fedora for the Pi.
In Oct . 2016, the launch of Fedora 25 Beta was announced, along with initial support for the Raspberry Pi 2 and 3. The last “general availability” version of Fedora 25 was introduced 1 month later, and subsequently I have been playing around with the various Fedora spins for the most recent versions of the Raspberry Pi.

This article is not as much a review of Fedora 25 on the Raspberry Pi 3 as a collection of tricks, screenshots, along with my own individual thoughts on the first formally supported version of Fedora for the Pi.

See details on opensource.com/article/17/3/how-install-fedora-on-raspberry-pi

Raspberry pi 3 – install Raspbian using mac os x



Raspberry pi 3 set up using Mac.
It is pretty easy and fast.

raspberry pi
http://amzn.to/2lkEckA

source

Raspberry Pi Alternatives: Why They Are a Better Buy

Raspberry Pi is not the baddest mini PC worldwide, and it is what its challengers are wanting to inform the remaining of the world. Now and then, a new mini computer is introduced in the marketplace promising to be the biggest one to take down Raspberry Pi. In actual fact, you will find there’s new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and costs you $30.

The Raspberry Pi is released with four models over time. These consist of Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most recently released which is Pi 3 Model B.

Pi 3 was established to confirm that Raspberry Pi is able to be enough for anybody with a lower priced PC for programming. It’s upgraded Processor chip with the Cortex A53, Hackaday mentioned, and runs on 1.2 GHz. Costing $35, the Raspberry Pi is the most chosen of all.

The Raspberry Pi, nevertheless, is not the single single board computer(SBC) for homebrewed projects. There are plenty more available on the market that cost less, and then some that can do more than Raspberry Pi for some extra, ZD Net published.

To begin with, there is the Omega 2, which includes a modular nature letting programmers to introduce Bluetooth or GPS quite simply. It has built-in Wi-Fi and flash storage area; the Operating-system is Linux distribution established on the OpenWrt system. The Omega 2 charges $5 and can operate on FreeBSD Operating-system, and that’s why it truly is created for learners.

The BBC Micro:bit charges $16 and is just the thing for students for their learning and prototyping projects. A 32-bit ARM Cortex central processor drives it from inside and it is different from the remaining for the 5×5 LED matrix. This function offers 25 independently programmable red-colored LEDs for basic output.

Plus, there is the BeagleBone Black, which charges $55 and exactly like the Raspberry Pi, is also a community-supported platform both for hobbyists and designers. It truly does work super fast; it can certainly boost Linux in around 10 seconds and can develop in below 5 minutes. It is pushed by AM335x 1GHz ARM Cortex-A8 coupled with 512MB DDR3 RAM.

A fresh one is the NanoPi M1 Plus, which has been titled as the new Raspberry Pi killer. At $30, it promises to have a better made design and layout and was ready to include beneficial elements including Wi-Fi and Wireless BT. It also presents an IR receiver, microphone, 8GB storage, and power and reset buttons.

On the other hand, the most excellent function of NanoPi M1 Plus is its capacity to run Ubuntu-Mate, Ubuntu-Core, and also Debian, Beta News stated. It is useful for business users, programmers, enthusiasts, and students.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi alternative

Know more on official web site: http://friendlyarm.com/index.php?route=product/product&product_id=176

There is a new Raspberry Pi challenger that is quite cost-effective. The reality is, some people may consider it as a Pi alternative. The $30 FriendlyElec NanoPi M1 Plus has an arguably exceptional design and layout, and critical integrated features just like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Raspberry Pi tutorial: Use SSH to in order to remote control your Raspberry Pi.



SSH protocol can be very useful if we want to remote control our Raspberry Pi. I am using a Raspberry Pi A+ board in this video but you can use any Raspberry Pi board you like.

So far, when we wanted to use our Raspberry Pi, we were using a keyboard, a mouse and a monitor via the HDMI port, or a touch screen like this one. The second method is easier and portable. I have prepared a detailed tutorial on that touch screen display a few weeks ago, you can check it out. But if we want an even easier solution, we can use our desktop computer, or laptop, or even our cell phone to remotely control the Raspberry Pi. Check this out, I am running a terminal on my Android cell phone and I can execute commands on my Raspberry Pi. I will now run a simple program I wrote in order to light up this LED. Cool, isn’t it? But very useful as well! Let’s see how we can achieve that!

——————–
WHERE TO BUY
——————–

1. Raspberry Pi 2: http://goo.gl/H87sNN

2. 5” TFT Display: http://goo.gl/i5LJIM

3. Small Wi-Fi Dongle: http://goo.gl/jvq0MS

4. LED: http://bit.ly/375LEDS

5. Wires: http://bit.ly/WiresArduino

6. Resistor: http://bit.ly/ResistorsB

7. Breadboard mini: http://bit.ly/MiniBreadboard

Full disclosure: All of the links above are affiliate links. I get a small percentage of each sale they generate. Thank you for your support!

Secure Shell or SSH is a cryptographic network protocol to allow remote login to other network services to operate securely over an unsecured network. Using SSH we can remotely login to a system and execute commands. In this case, the system we want to login to, is the Raspberry Pi. SSH protocol allow us to gain access to the command line of the Raspberry Pi from another computer, but only on the same network. Let’s now see how to setup our systems in order to achieve that.

SHH is built into the Raspbian distribution that we are using, so all we have to do is to setup the network connection for our Raspberry Pi board. I am using a Raspberry Pi A+ today, but you can use any Raspberry Pi board you like. I replaced the big WiFi dongle I was using so far, with this tiny and cheap one I got from Gearbest.com. It is working fine and it is plug and play, there is no need to install anything at all. It makes things more compact. You can find a link for it in the description of the video. All we have to do now, is to boot our Raspberry Pi once and set up the WiFi password. Next we have to run the command sudo ifconfig in order to get the IP address of our Raspberry Pi. Note this address as we are going to need it. In my case the address is this 192.168.1.44. Most routers, assign a different IP address each time we connect our Raspberry Pi board to the network. So, we have to make the IP address of the Raspberry Pi a static one. In order to achieve that I logged in my routers settings page, and defined that I want my Raspberry Pi board to have a specific IP address, 192.168.1.44. Check your Router settings and see how to set your Raspberry Pi to have a static IP.

——————–
Physics Experiments Puzzle Game
——————–

You can download my latest Android Game which is called Incredible Physics Experiments here:

📥 http://bit.ly/IncredibleExperiments

——————–
MORE PROJECTS
——————–
Arduino Datalogger: https://www.youtube.com/watch?v=oei3Y6tOhVI
Arduino Weather Station Project: https://www.youtube.com/watch?v=9jN-3DtS1RI
Arduino Nokia 5110 LCD Display: https://www.youtube.com/watch?v=aDwrMeu4k9Y
Arduino OLED display tutorial: https://www.youtube.com/watch?v=A9EwJ7M7OsI
DIY Arduino: https://www.youtube.com/watch?v=npc3uzEVvc0

——————–
ABOUT EDUC8S.TV
——————–
Educ8s.tv is a Youtube channel and website which is dedicated in developing high quality videos about DIY hardware and software projects. In this channel we develop projects with Arduino, Raspberry Pi, we build robots and simple electronic circuits. Check out our website as well for more information: http://www.educ8s.tv

——————–
SUBSCRIBE ON YOUTUBE
——————–

Never miss a video: https://www.youtube.com/subscription_center?add_user=educ8s

source

Raspberry Pi Substitutes: How Come They Are a Greater Buy

Raspberry Pi is not the baddest tiny PC on the globe, and it’s what its challengers are endeavoring to notify the remainder of the world. Now and then, a fresh mini computer is introduced in the marketplace promising to be the largest one to take down Raspberry Pi. In fact, you will find a new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and charges $30.

The Raspberry Pi is released with 4 variations as time passes. These comprise of Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most current which is Pi 3 Model B.

Pi 3 was established to ensure that Raspberry Pi could please anybody with a low-cost PC for developer work. It has improved CPU with the Cortex A53, Hackaday stated, and runs on 1.2 GHz. Priced at $35, the Raspberry Pi is the most widely used of all.

The Raspberry Pi, nevertheless, is not the single single board computer(SBC) for homebrewed projects. There are a number more in the market which will cost less, and then some that can do more than Raspberry Pi for a little extra, ZD Net expressed.

For starters, there’s the Omega 2, that features a modular nature allowing software engineers to put in Bluetooth or Gps system rapidly. It has inbuilt Wi-Fi and flash memory space; the OS is Linux distribution established on the OpenWrt program. The Omega 2 costs you $5 and can even operate on FreeBSD Operating system, and that is why it is really excellent for students.

The BBC Micro:bit costs you $16 and is excellent for students for their learning and prototyping projects. A 32-bit ARM Cortex processor energizes it from inside and it is unique from the competition for its 5×5 LED matrix. This benefit offers you 25 separately programmable red-colored LEDs for basic output.

Similarly, there is the BeagleBone Black, which costs you $55 and like the Raspberry Pi, is another community-supported platform both for amateurs and designers. It truly does work speedy; it can actually boost Linux in just 10 seconds and can develop in below 5 min’s. It is actually motivated by AM335x 1GHz ARM Cortex-A8 combined with 512MB DDR3 RAM.

One more is the NanoPi M1 Plus, which has been referred to as as the new Raspberry Pi killer. Priced at $30, it promises to have a sturdier design and layout and was competent to merge notable elements similar to Wi-Fi and Wireless BT. Additionally, it has got an IR receiver, microphone, 8GB storage area, and power and reset control buttons.

Nevertheless, the perfect element of NanoPi M1 Plus is its capacity to run Ubuntu-Mate, Ubuntu-Core, and even Debian, Beta News described. It is an excellent option for company users, coders, hobbyists, and students.

nanopi m1 plus specs

FriendlyElec introduces Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi substitute

Learn more on official website: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

You can find a new Raspberry Pi rival that is quite budget friendly. In reality, some people may consider it as a Pi substitute. The $30 FriendlyElec NanoPi M1 Plus has an arguably top-notch design and layout, along with essential built-in features like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Raspberry PI Operating System Installation – Raspbian using NOOBS 1.3



Shows how to setup and install the Raspbian operating sytstem on a Raspberry PI and SD card for the first time. Uses NOOBS 1.3 to install the software. Part of an article at:
http://startingelectronics.org/articles/raspberry-PI/ten-things-raspberry-PI/

source

Raspberry Pi Alternate Options: The Reason They Are a Better Buy

Raspberry Pi is not the baddest small computer in the market, and it’s what its contenders are wanting to tell the rest of the world. Now and then, a fresh mini computer is introduced in the marketplace promising to be the largest one to take down Raspberry Pi. Actually, you will find a new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and charges $30.

The Raspberry Pi is introduced with 4 versions as time goes by. These include Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most recently released which is Pi 3 Model B.

Pi 3 was created to be certain that Raspberry Pi has the ability to suit anybody with a low priced computer for programming. It’s upgraded CPU with the Cortex A53, Hackaday described, and runs on 1.2 GHz. At $35, the Raspberry Pi is the trendiest of all.

The Raspberry Pi, having said that, is not the solely single board computer(SBC) for homebrewed projects. There are tons more available that will cost less, and then some that can do more than Raspberry Pi for a bit more, ZD Net announced.

To start with, there’s the Omega 2, with a modular nature helping computer programmers to add on Wireless bluetooth or Gps unit with no trouble. It has built-in Wi-Fi and flash storage space; the Operating system is Linux distribution on top of the OpenWrt program. The Omega 2 charges $5 and can run on FreeBSD Operating system, its no wonder that it’s well suited for people in the course.

The BBC Micro:bit charges $16 and is excellent for students for their exercising and prototyping projects. A 32-bit ARM Cortex cpu powers it internally and it is different from the rest because of its 5×5 LED matrix. This benefit presents 25 independently programmable red-colored LEDs for basic output.

There is also the BeagleBone Black, which charges $55 and like the Raspberry Pi, is yet another community-supported platform both for fans and builders. The system functions super fast; it can actually boost Linux in around 10 seconds and can develop in under Five min’s. It is motorized by AM335x 1GHz ARM Cortex-A8 as well as 512MB DDR3 RAM.

Someone else is the NanoPi M1 Plus, which has been named as the new Raspberry Pi killer. At $30, it promises to have a more robust design and layout and was able to assimilate notable elements for instance Wi-Fi and Wireless BT. Additionally, it contains an IR receiver, mic, 8GB storage space, and power and reset control buttons.

However, the most advantageous element of NanoPi M1 Plus is its ability to run Ubuntu-Mate, Ubuntu-Core, and Debian, Beta News published. It is well suited for company users, developers, lovers, and students.

nanopi m1 plus specs

FriendlyElec rolls out Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Get more info on official website: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

There’s a new Raspberry Pi competitor that is quite low-priced. If truth be told, some folks might see it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an certainly excellent design and layout, and crucial included features just like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Raspberry Pi – Tutorial 12 – Networking – How to Configure a Static IP Address & Setup Wifi



This tutorial will show you how to configure a static IP address for your Pi as well as setup a usb wifi adapter from Adafruit.

Putty – Windows SSH/Telnet Software: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
Wifi Adapter: http://www.adafruit.com/products/814
Free Pi Hosting: https://www.edis.at/en/server/colocation/austria/raspberrypi/

Recommended Reading…

DHCP: http://en.wikipedia.org/wiki/Dhcp
Private Networks: http://en.wikipedia.org/wiki/Private_network
NAT: http://en.wikipedia.org/wiki/Network_address_translation

source

Raspberry Pi Substitutes: Why They’re a Better Buy

Raspberry Pi isn’t the baddest mini computer across the world, and it is what its challengers are endeavoring to tell the rest of the world. Now and then, a new mini computer is introduced out there promising to be the largest one to take down Raspberry Pi. Indeed, there is a new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and costs you $30.

The Raspberry Pi is released with four variations as time passes. Included in these are Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most current which is Pi 3 Model B.

Pi 3 is built to ensure Raspberry Pi could meet the needs of anybody with a cheap computer for coding. It has replaced Processor chip with the Cortex A53, Hackaday suggested, and runs on 1.2 GHz. At $35, the Raspberry Pi is the top selling of all.

The Raspberry Pi, nevertheless, isn’t the single single board computer(SBC) for homebrewed projects. There are a number more in the industry which be cheaper, and then some that can do more than Raspberry Pi for a little bit more, ZD Net reported.

For a start, there is the Omega 2, featuring a modular nature permitting computer programmers to incorporate Wireless bluetooth or Gps system effortlessly. It has inbuilt Wi-Fi and flash storage area; the OS is Linux distribution founded upon the OpenWrt program. The Omega 2 will cost you $5 and is also able to run on FreeBSD Operating-system, which describes why it’s excellent for school students.

The BBC Micro:bit will cost you $16 and is excellent for learners for their exercising and prototyping projects. A 32-bit ARM Cortex processor powers it from the inside and it stands apart from the competition thanks to its 5×5 LED matrix. This benefit offers you 25 separately programmable red Led lights for basic output.

In addition, there is the BeagleBone Black, which will cost you $55 and like the Raspberry Pi, is yet another community-supported platform both for enthusiasts and builders. It works rapid; it is able to boost Linux in under 10 seconds and can develop in under Five min’s. It is actually driven by AM335x 1GHz ARM Cortex-A8 combined with 512MB DDR3 RAM.

Another one is the NanoPi M1 Plus, that has been referred to as as the most current Raspberry Pi killer. Priced at $30, it promises to have a tougher layout and design and was competent to incorporate beneficial benefits for example Wi-Fi and Bluetooth. What’s more, it presents an IR receiver, mic, 8GB memory, and power and reset keys.

However, the most beneficial attribute of NanoPi M1 Plus is its power to run Ubuntu-Mate, Ubuntu-Core, as well as Debian, Beta News declared. It is suited to business users, developers, hobbyists, and learners.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Know more on official webpage: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

There exists a new Raspberry Pi rival that is quite economical. Actually, some folks may consider it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an certainly exceptional layout and design, plus essential integrated features such as Wi-Fi and Bluetooth.

https://www.betanews.com/2017/03/02/friendlyelec-linux-debian-ubuntu-nanopi-m1-plus-raspberry-pi/

Raspberry Pi – Tutorial 3 – Installing an OS to your SD Card (See Also: Tutorial #3B)



In this tutorial, I’m going to go over some of the Raspberry Pi operating system choices and show you how to install the OS to an SD card.

_Operating System Download Links_

BerryBoot: http://www.berryterminal.com/doku.php/berryboot

Raspbian: http://www.raspberrypi.org/downloads

Occidentalis: http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro

OpenElec Pi: http://openelec.tv/get-openelec (Goto Official Daily Builds and choose the openelec-rpi folder. Download the most recent image)

RaspBMC: http://www.raspbmc.com/download (They have a custom installer, but you should be able to use the DD method with their image file)

_Other Methods for Installing_

See Also: http://elinux.org/RPi_Easy_SD_Card_Setup

Windows Disk Imager: http://sourceforge.net/projects/win32diskimager/

FOR WINDOWS INSTALL CHECK OUT (not my video): http://www.youtube.com/watch?v=Q59OsGosQRA

source

Raspberry Pi Substitutes: How Come They Are a Better Buy

Raspberry Pi is not the baddest small PC around the globe, and it’s what its rivals are endeavoring to say to the remaining of the world. Now and then, a fresh mini computer is introduced in the marketplace promising to be the largest one to take down Raspberry Pi. If truth be told, you will find there’s new Raspberry Pi killer named NanoPi M1 Plus, which is Ubuntu-Linux ready and priced at $30.

The Raspberry Pi is presented with four variants over time. These consist of Raspberry Pi Model B+, Pi 2 Model B, Zero, and the latest which is Pi 3 Model B.

Pi 3 was designed to be sure that Raspberry Pi could delight anyone with a better value PC for programming. It has upgraded Processor with the Cortex A53, Hackaday revealed, and runs on 1.2 GHz. Charging $35, the Raspberry Pi is the most chosen of all.

The Raspberry Pi, on the other hand, is not the sole single board computer(SBC) for homebrewed projects. There are plenty more sold in the market that will cost less, and then some that can do more than Raspberry Pi for some extra, ZD Net stated.

For a start, there’s the Omega 2, sporting a modular nature permitting programmers to add in Bluetooth or Gps system comfortably. It has integrated Wi-Fi and flash memory space; the OS is Linux distribution based upon the OpenWrt program. The Omega 2 is priced at $5 and can even run on FreeBSD Operating system, that is why it is really made for students.

The BBC Micro:bit is priced at $16 and is ideal for students for their exercising and prototyping projects. A 32-bit ARM Cortex processor chip powers it internally and it sticks out from the competition due to the 5×5 LED matrix. This feature offers 25 separately programmable red LEDs for basic output.

There is also the BeagleBone Black, which is priced at $55 and much like the Raspberry Pi, is yet another community-supported platform both for amateurs and builders. It does work speedy; it can boost Linux in less than 10 seconds and can develop in less than Five min’s. It is powered by AM335x 1GHz ARM Cortex-A8 as well as 512MB DDR3 RAM.

One more is the NanoPi M1 Plus, which was referred to as as the new Raspberry Pi killer. At $30, it promises to have a much stronger layout and design and was able to include important functions for instance Wi-Fi and Wireless bluetooth. Additionally, it possesses an IR receiver, mic, 8GB storage area, and power and reset switches.

But, the most beneficial attribute of NanoPi M1 Plus is its capability to run Ubuntu-Mate, Ubuntu-Core, plus Debian, Beta News noted. It is excellent for firm users, programmers, enthusiasts, and students.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi substitute

Learn more on official webpage: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

You can find a new Raspberry Pi challenger that is quite cost-effective. In fact, a number of people may regard it as a Pi substitute. The $30 FriendlyElec NanoPi M1 Plus has an certainly superior layout and design, plus key built in features like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

How to Install OpenCV On Raspberry Pi



Update on libraries:
———————————-
I have just installed the new Jessie distribution with OpenCV 3.0 and I had to update couple of libraries.
libtiff4 should be libtiff5 and the second big install list is this:

sudo apt-get -y install build-essential cmake cmake-curses-gui pkg-config libpng12-0 libpng12-dev libpng++-dev libpng3 libpnglite-dev zlib1g-dbg zlib1g zlib1g-dev pngtools libtiff5-dev libtiff5 libtiffxx0c2 libtiff-tools libeigen3-dev
Also, if you are looking for a package for Jessie here is a nice link that lists all the packages:
https://www.howtoinstall.co/en/debian/jessie/main/

With this video tutorial I will show how to Install OpenCV on the Raspberry Pi Model B with the Raspbian distribution. In the end there is a short demo on how to connect with the camera.

Configuration setup and walkthrough can be found on my web site:
www.robopapa.com (or if you want to get directly to the page you can go here http://www.robopapa.com/Projects/InstallOpenCVOnRaspberryPi

I also created an OpenCV Tracking video which you can watch it here:

And don’t forget to subscribe (It really helps!!)
https://www.youtube.com/user/therobopapa?sub_confirmation=1

source

Raspberry Pi Alternate Options: Reasons Why They Are a Greater Buy

Raspberry Pi isn’t the baddest tiny computer on the planet, and it is what its rivals are attempting to convey to the rest of the world. Now and then, a fresh mini computer is launched in the marketplace promising to be the biggest one to take down Raspberry Pi. In fact, there’s a new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and costs $30.

The Raspberry Pi is launched with four variations over the years. These consist of Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most recent which is Pi 3 Model B.

Pi 3 was created to be sure that Raspberry Pi has the potential to please anyone with an affordable computer for computer programming. It’s improved Processor chip with the Cortex A53, Hackaday announced, and runs on 1.2 GHz. At $35, the Raspberry Pi is the most favored of all.

The Raspberry Pi, however, isn’t the sole single board computer(SBC) for homebrewed projects. There are lots more available in the market that are less costly, and then some that can do more than Raspberry Pi for some extra, ZD Net announced.

First off, there is the Omega 2, along with a modular nature allowing for computer programmers to bring in Bluetooth or Global positioning systems with no trouble. It has inbuilt Wi-Fi and flash storage area; the Operating-system is Linux distro derived from the OpenWrt program. The Omega 2 costs you $5 and can even operate on FreeBSD OS, which describe why it’s appropriate for people in the course.

The BBC Micro:bit costs you $16 and is perfect for learners for their studying and prototyping projects. A 32-bit ARM Cortex processor energizes it from inside and it stands apart from the remainder because of its 5×5 LED matrix. This benefit gives you 25 separately programmable red-colored LEDs for basic output.

There’s also the BeagleBone Black, which costs you $55 and like the Raspberry Pi, is one more community-supported platform both for hobbyists and programmers. It truly does work quickly; it can boost Linux in less than Ten secs and can develop in below 5 min’s. It is actually motorized by AM335x 1GHz ARM Cortex-A8 combined with 512MB DDR3 RAM.

Someone else is the NanoPi M1 Plus, which was known as as the new Raspberry Pi killer. Priced at $30, it promises to have a better quality design and layout and was in a position to include crucial features similar to Wi-Fi and Wireless BT. In addition, it provides an IR receiver, microphone, 8GB storage, and power and reset buttons.

On the other hand, the most excellent attribute of NanoPi M1 Plus is its ability to run Ubuntu-Mate, Ubuntu-Core, and also Debian, Beta News explained. It’s just the thing for business users, programmers, enthusiasts, and learners.

nanopi m1 plus specs

FriendlyElec rolls out Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Learn more on official site: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

There’s a new Raspberry Pi contender that is quite low-priced. In truth, some folks might see it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an arguably top-quality design and layout, as well as key in-built features like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Older posts

© 2017 PCB Prototype

Up ↑