PCB Prototype

Rapid PCB Prototype Service

Tag: Raspberry Pi Compute Module 3 (page 1 of 4)

Setting up Adafruit FONA on a Raspberry Pi



The Adafruit FONA allows you to connect to the mobile GSM network from a Raspberry Pi or most other devices.

Adafruit Fona – http://www.adafruit.com/product/1963
GSM Antenna – http://www.adafruit.com/products/1858
Battery – http://www.adafruit.com/products/258 source

Raspberry Pi Compute Module 3 (CM3) targets on consumer products

Sort of announced in July 2016, the most recent Raspberry Pi Compute Module 3 (CM3) is considered to go to the market very soon. Last Oct PC equipment manufacturer NEC already announced a new variety of professional P and V Series large format displays that flawlessly implant the RPi CM3 module. The new module, for sale in two flavors – CM3 and CM3L (lite) – will complement the CM1 module introduced before.

Specifications for the CM1, CM3 and CM3L SODIMM modules are located in the data sheet found on the RPi internet site
https://www.raspberrypi.org/documentation/hardware/computemodule/RPI-CM-DATASHEET-V1_0.pdf
. Where the CM1 was based on a BCM2835 CPU (as employed on the original RPi and RPi B+ models), the CM3 posesses a quad-core 1.2 GHz BCM2837 central processing unit, similar to the RPi 3. It includes 1 GB of LPDDR2 RAM and 4 GB eMMC Flash. The ‘L’ version is a CM3 without having eMMC Flash, allowing for the buyer to link up his/her individual SD/eMMC system. The pinout of the CM1 and CM3 modules are identical but the CM3 module is one mm higher (31 millimeters).

Cost

The price of the new modules is not known yet, but since a CM1 retails at around £20, a equivalent price can be predicted for the CM3.

Using : https://www.elektormagazine.com/news/raspberry-pi-compute-module-3-cm3-to-hit-the-market-soon

Technical Specs

The CM3 is founded upon the Raspberry Pi 3 hardware and is intended for industrial use in order to supply a less expensive opportunity for people to make tailored products based on the Pi hardware and software system. The Compute Module line is scaled-down and has less benefits and ports than a standard Raspberry Pi, making it suitable for Internet of Things (IoT) products.

“The module uses a standard DDR2 SODIMM form factor, sockets for which are made by several makers, are comfortably obtainable, and are economical,” Raspberry Pi COO and hardware lead James Adams claimed in a blog post.

There are 2 designs of the CM3. Below are the specifications for both of them:

Standard Version:

BCM2837 central processing unit at to a maximum of 1.2GHz
1Gigabyte RAM
4Gigabyte of on-module eMMC flash

Lite Version:

BCM2837 processor at to a maximum of 1.2GHz
1GB RAM
SD card interface on Module pins thus an individual can hook this up to an eMMC or SD card that they select

Both models can be slotted into a newly released Compute Module IO Board V3 (CMIO3) which lets you conduct the following:

Presents necessary power to the CM3
Helps you program the CM3 Standard’s flash memory or to make use of an SD card on the Lite version.
Connect to the processor interfaces in a a tad bit more friendly fashion (pin headers and flexi connectors, much like the Pi)
Offers the needed HDMI and USB connectors to ensure you have an full system that can boot Raspbian (or the Operating system of your preference).

“This board provides both a starting template for those who want to design with the Compute Module, and a faster way to begin experimenting with the hardware, and building and testing a system, before going to the money necessary for fabricating a tailor-made board,” Adam said.

The older Compute Module model will continue to be offered, for many who have no need for the CM3’s performance turbocharge. As per the Raspberry Pi official mag The MagPi:

“With a couple of caveats, the CM3 can be utilized a drop-in substitute for the CM1 being that they are pin compatible; the CM3 is 1mm taller, having said that, while the CPU can pull far more current from the VBAT power source line and will generate a great deal more heat under heavy load.”

Raspberry Pi NEW COMPUTE MODULE and IO BOARD designed using Cadence



Here we talk to Raspberry Pi about their use of Cadence PCB Editor on the new Raspberry Pi Compute Module and the new Raspberry Pi IO Board. James Adams (Director of Hardware Engineering) talks to Simon Wood from Parallel Systems www.orcad.co.uk Cadence PCB Suite prices start from £499 + VAT for a 1 year rental of Standard www.parallel-systems.co.uk source

Raspberry Pi Compute Module 3 (CM3) targets on gadgets

Sort of announced in July 2016, the recent Raspberry Pi Compute Module 3 (CM3) is considered to go to the market very soon. Last Oct computer system equipment manufacturer NEC already announced a new spread of professional P and V Series large format displays that easily include the RPi CM3 module. The new module, obtainable in 2 versions – CM3 and CM3L (lite) – will complement the CM1 module introduced some years ago.

Specs for the CM1, CM3 and CM3L SODIMM modules may be found in the data sheet readily available on the RPi web page
https://www.raspberrypi.org/documentation/hardware/computemodule/RPI-CM-DATASHEET-V1_0.pdf
. Where the CM1 was driven by a BCM2835 processor chip (as used on the original RPi and RPi B+ models), the CM3 posesses a quad-core 1.2 GHz BCM2837 CPU, like the RPi 3. It has 1 Gigabytes of LPDDR2 RAM and 4 Gigabytes eMMC Flash. The ‘L’ version is a CM3 with no eMMC Flash, enabling the owner to hook up his/her very own SD/eMMC device. The pinout of the CM1 and CM3 modules are identical but the CM3 module is one mm higher (31 millimeters).

Cost

The price tag on the new modules is not known yet, but since a CM1 sells at about £20, a comparable price may be expected for the CM3.

Using : https://www.elektormagazine.com/news/raspberry-pi-compute-module-3-cm3-to-hit-the-market-soon

Technical Specs

The CM3 is founded upon the Raspberry Pi 3 hardware and is created for industrial use to supply a budget friendly approach for customers to make customized products based upon the Pi hardware and software system. The Compute Module line is more compact and has less capabilities and ports than a regular Raspberry Pi, allowing it to be perfect for Internet of Things (IoT) products.

“The module works with a standard DDR2 SODIMM form factor, sockets for which are made by several manufacturers, are simply available in the market, and also are budget friendly,” Raspberry Pi COO and hardware lead James Adams stated in a post.

There are two designs of the CM3. Here are the technical specs for both of them:

Standard Variant:

BCM2837 central processing unit at as high as 1.2Gigahertz
1GB RAM
4GB of on-module eMMC flash

Lite Model:

BCM2837 processor at as high as 1.2GHz
1GB RAM
SD card interface on Module pins thus an individual can connect it up to an eMMC or SD card of their choice

Both versions can be slotted into a newly released Compute Module IO Board V3 (CMIO3) which helps you to carry out the following:

Delivers essential power to the CM3
Will allow you to program the CM3 Standard’s flash memory or to work with an SD card on the Lite version.
Connect to the processor interfaces in a a little more friendly fashion (pin headers and flexi connectors, much like the Pi)
Supplies the essential HDMI and USB connectors allowing you to have an complete system which can boot Raspbian (or maybe the OS of your choice).

“This board offers both a starting template for those who want to design with the Compute Module, and a faster way to begin tinkering with the hardware, and building and testing a system, before going to the expense of making a made to order board,” Adam said.

The older Compute Module model will continue to be delivered, for many who don’t require the CM3’s performance increasing. According to the Raspberry Pi official mag The MagPi:

“With several caveats, the CM3 can be utilized a drop-in substitute for the CM1 since they are pin compatible; the CM3 is 1mm taller, yet, while the CPU can pull far more current from the VBAT power source line and will definitely produce a lot more heat under heavy load.”

Raspberry Pi 3.2″ Touch Screen and Modules Kit Review



Raspberry Pi 3.2″ Touch Screen and Modules Kit Review

I show you what’s inside the Waveshare 3.2″ Touch Screen and Modules kit for the Raspberry Pi and talk about the main parts of the boards and their functions. There’s a lot of cool stuff in here that I can’t wait to start experimenting with.

This kit is available at http://www.circuitbasics.com/wl4u

Check out the Circuit Basics blog for articles and tutorials on the Raspberry Pi, Arduino and other DIY electronic projects! http://www.circuitbasics.com

Facebook: http://www.circuitbasics.com/facebook
Twitter: http://www.twitter.com/circuitbasics
Instagram: http://www.instagram.com/circuitbasics source

Raspberry Pi Compute Module 3 (CM3) aims to consumer products

Sort of announced in July 2016, the most recent Raspberry Pi Compute Module 3 (CM3) is considered to arrive at the market soon. Last Oct computer system equipment maker NEC already announced a new range of professional P and V Series large format displays that easily embed the RPi CM3 module. The new module, offered in two models – CM3 and CM3L (lite) – will complement the CM1 module launched before.

Specifications for the CM1, CM3 and CM3L SODIMM modules can be found in the data sheet accessible on the RPi internet site
https://www.raspberrypi.org/documentation/hardware/computemodule/RPI-CM-DATASHEET-V1_0.pdf
. Where the CM1 was based on a BCM2835 processor chip (as employed on the original RPi and RPi B+ models), the CM3 features a quad-core 1.2 GHz BCM2837 chip, like the RPi 3. It consists of 1 Gigabytes of LPDDR2 RAM and 4 Gigabytes eMMC Flash. The ‘L’ version is a CM3 with no eMMC Flash, enabling the client to install his/her individual SD/eMMC unit. The pinout of the CM1 and CM3 modules are exactly the same but the CM3 module is one millimeter higher (31 mm).

Pricing

The price of the new modules is not known yet, but since a CM1 retails at roughly £20, a very similar price may well be predicted for the CM3.

According to : https://www.elektormagazine.com/news/raspberry-pi-compute-module-3-cm3-to-hit-the-market-soon

Specs

The CM3 is founded upon the Raspberry Pi 3 hardware and is for the purpose of industrial use in order to supply a cheap way for individuals to make tailored products based upon the Pi hardware and software system. The Compute Module products is more compact and has less abilities and ports than a regular Raspberry Pi, which makes it well suited for Internet of Things (IoT) products.

“The module utilizes a standard DDR2 SODIMM form factor, sockets for which are made by several producers, are simply accessible, and additionally are low priced,” Raspberry Pi COO and hardware lead James Adams mentioned in a post.

There are 2 variants of the CM3. The following are the specifications for both of them:

Standard Version:

BCM2837 central processor at to a maximum of 1.2GHz
1GB RAM
4GB of on-module eMMC flash

Lite Version:

BCM2837 processor at to a maximum of 1.2GHz
1GB RAM
Sdcard interface on Module pins consequently an individual can connect it up to an eMMC or Sdcard of their choice

Both versions can be slotted into a newly released Compute Module IO Board V3 (CMIO3) which helps you to do the following:

Delivers required power to the CM3
Permits you to program the CM3 Standard’s flash memory or to utilize an Sdcard on the Lite version.
Access the processor interfaces in a a tad bit more friendly fashion (pin headers and flexi connectors, just like the Pi)
Offers the needed HDMI and USB connectors in order that you have an entire system that can boot Raspbian (or maybe the OS of your preference).

“This board gives you both a starting template for those who want to design with the Compute Module, and a quick way to begin with experimenting with the hardware, and building and testing a system, before you go to the money necessary for fabricating a custom made board,” Adam said.

The older Compute Module model will still be offered, for folks who wouldn’t like the CM3’s performance betterment. As reported by the Raspberry Pi official mag The MagPi:

“With some caveats, the CM3 can be used a drop-in replacement for the CM1 being that they are pin compatible; the CM3 is 1mm taller, nevertheless, while the CPU can pull considerably more current from the VBAT power source line and will deliver a great deal more heat under heavy load.”

Raspberry Pi – Mini LCD Display Tutorial



Liquid-crystal goodness anyone?!

That’s right! In today’s tutorial I show you how to wire up and program your very own mini LCD display to your Raspberry Pi! By the end the of this video you will be printing your own messages to your very own screen module and will understand all of the Python code behind it. A good, cheap and enjoyable little project for Raspberry Pi – with plenty of scope for your own further developments!

INFORMATION:

Raspberry Pi Raspbian official download: https://www.raspberrypi.org/downloads

Grab an LCD display for under £5 here: https://ryanteck.uk/displays/11-16×2-character-i2c-lcd-display-0635648607139.html?search_query=16×2&results=3

Need some female-to-female jumper wires? Grab those here too: https://ryanteck.uk/cables/61-jumper-wires.html?search_query=jumper+wires&results=7#/14-jumper_wire_length-30cm_118/12-jumper_wire_pins-female_to_female

Take a look at the code and installation script here: https://github.com/the-raspberry-pi-guy/lcd

COMMANDS:

Install all of the code: git clone https://github.com/the-raspberry-pi-guy/lcd

Change into the new directory with downloaded code: cd lcd

Install the required software: sudo sh install.sh

View either of the demo programs with: nano program_name.py

Run either of the demo programs with: python program_name.py

Thanks for watching! Don’t forget to like, subscribe and share!

The Raspberry Pi Guy

Y U NO SUBSCRIBE?! source

Raspberry Pi Compute Module 3 (CM3) digs up gadgets

Sort of announced in July 2016, the most up to date Raspberry Pi Compute Module 3 (CM3) is considered to go to the market in the near future. Last Oct computer equipment maker NEC already announced a new array of professional P and V Series large format displays that gracefully embed the RPi CM3 module. The new module, available in 2 flavors – CM3 and CM3L (lite) – will complement the CM1 module released some years ago.

Specifications for the CM1, CM3 and CM3L SODIMM modules appear in the data sheet found on the RPi website
https://www.raspberrypi.org/documentation/hardware/computemodule/RPI-CM-DATASHEET-V1_0.pdf
. Where the CM1 was based on a BCM2835 processor (as used on the original RPi and RPi B+ models), the CM3 has a quad core 1.2 GHz BCM2837 CPU, the same as the RPi 3. It provides 1 GB of LPDDR2 RAM and 4 GB eMMC Flash. The ‘L’ version is a CM3 with no eMMC Flash, allowing the owner to link up his/her individual SD/eMMC system. The pinout of the CM1 and CM3 modules are the same but the CM3 module is one millimeter higher (31 millimeters).

Cost

The money necessary for the new modules isn’t known yet, but since a CM1 retails at roughly £20, a matching price may well be estimated for the CM3.

Derived from : https://www.elektormagazine.com/news/raspberry-pi-compute-module-3-cm3-to-hit-the-market-soon

Specs

The CM3 is founded upon the Raspberry Pi 3 hardware and is ideal for industrial use to offer a economical opportinity for folks to make customized products based on the Pi software and hardware system. The Compute Module line is smaller and has less attributes and ports than a standard Raspberry Pi, allowing it to be to suit Internet of Things (IoT) products.

“The module works with a standard DDR2 SODIMM form factor, sockets for which are made by several producers, are effortlessly accessible, and are cheap,” Raspberry Pi COO and hardware lead James Adams explained in a post.

There are two designs of the CM3. Below are the technical specs for both:

Standard Version:

BCM2837 chip at to a maximum of 1.2GHz
1Gigabyte RAM
4Gigabyte of on-module eMMC flash

Lite Version:

BCM2837 processor at to a maximum of 1.2GHz
1GB RAM
SD card interface on Module pins so a user can hook this up to an eMMC or SD card of their choice

Both variants can be slotted into a newly released Compute Module IO Board V3 (CMIO3) which lets you perform the following:

Provides needed power to the CM3
Permits you to program the CM3 Standard’s flash memory or to work with an SD card on the Lite version.
Connect to the processor interfaces in a a little more friendly fashion (pin headers and flexi connectors, just like the Pi)
Provides the needed HDMI and USB connectors allowing you to have an entire system that can boot Raspbian (or perhaps the Operating-system of your choosing).

“This board features both a starting template for those who want to design with the Compute Module, and a faster way to begin with experimenting with the hardware, and building and testing a system, before you go to the fee for fabricating a custom board,” Adam said.

The older Compute Module model will still be provided, for individuals that wouldn’t like the CM3’s performance boost. Based on the Raspberry Pi official magazine The MagPi:

“With a few caveats, the CM3 can be used a drop-in substitute for the CM1 since they’re pin compatible; the CM3 is 1mm taller, however, while the CPU can pull considerably more current from the VBAT power supply line and will definitely contribute to a whole lot more heat under heavy load.”

RASPBERRY-PI RPI CMDK ADAPTER ADAPTER, COMPUTE MODULE CAMERA & DISPLAY



The RPI CMDK ADAPTER is a camera and display adapter for Raspberry Pi Compute Board. The board comes with one camera adapter board and one display adapter board. source

Raspberry Pi Compute Module 3 (CM3) targets consumer products

Sort of announced in July 2016, the recent Raspberry Pi Compute Module 3 (CM3) is known to arrive at the market quickly. Last October PC equipment company NEC previously announced a new spread of professional P and V Series large format displays that smoothly include the RPi CM3 module. The new module, for sale in two versions – CM3 and CM3L (lite) – will complement the CM1 module launched in earlier times.

Specs for the CM1, CM3 and CM3L SODIMM modules appear in the data sheet found on the RPi webpage
https://www.raspberrypi.org/documentation/hardware/computemodule/RPI-CM-DATASHEET-V1_0.pdf
. Where the CM1 was based upon a BCM2835 processor chip (as employed on the original RPi and RPi B+ models), the CM3 contains a quad-core 1.2 GHz BCM2837 processor, the same as the RPi 3. It has 1 GB of LPDDR2 RAM and 4 GB eMMC Flash. The ‘L’ version is a CM3 without eMMC Flash, allowing the end user to connect his/her very own SD/eMMC product. The pinout of the CM1 and CM3 modules are the same but the CM3 module is one millimeter higher (31 mm).

Pricing

The price of the new modules is not known yet, but because a CM1 sells at roughly £20, a comparable price could possibly be anticipated for the CM3.

In keeping with : https://www.elektormagazine.com/news/raspberry-pi-compute-module-3-cm3-to-hit-the-market-soon

Specifications

The CM3 is based upon the Raspberry Pi 3 hardware and is designed for industrial use in order to offer a less expensive opportinity for people to make custom products based upon the Pi hardware and software platform. The Compute Module line is smaller and has less benefits and ports than a standard Raspberry Pi, that makes it perfect for Internet of Things (IoT) products.

“The module uses a standard DDR2 SODIMM form factor, sockets for which are made by several manufacturers, are effortlessly available, and are low-cost,” Raspberry Pi COO and hardware lead James Adams explained in a post.

There are 2 versions of the CM3. Listed below are the specifications for both of them:

Standard Variant:

BCM2837 chip at up to 1.2Gigahertz
1GB RAM
4GB of on-module eMMC flash

Lite Model:

BCM2837 processor at up to 1.2GHz
1GB RAM
SD card interface on Module pins which means that a person can wire it up to an eMMC or SD card of their choice

Both models can be slotted into a newly released Compute Module IO Board V3 (CMIO3) which helps you to do the following:

Gives needed power to the CM3
Lets you program the CM3 Standard’s flash memory or to work with an SD card on the Lite version.
Connect to the processor interfaces in a slightly more friendly fashion (pin headers and flexi connectors, much like the Pi)
Supplies the essential HDMI and USB connectors allowing you to have an entire system which can boot Raspbian (or maybe the Operating-system of your choice).

“This board presents both a starting template for those who want to design with the Compute Module, and a quick way to begin with experimenting with the hardware, and building and testing a system, before going to the fee for fabricating a tailor made board,” Adam said.

The older Compute Module model will still be available, for folks who do not require the CM3’s performance boost. As per the Raspberry Pi official magazine The MagPi:

“With a couple of caveats, the CM3 may be used a drop-in substitute for the CM1 considering they are pin compatible; the CM3 is 1mm taller, having said that, while the CPU can pull far more current from the VBAT power source line and will definitely generate a whole lot more heat under heavy load.”

Raspberry Pi Tutorial Reihe – Einführung Alle Modelle [4K] [Deutsch]



Mit diesen Video Begine ich mein Raspberry Pi Reihe in den ich alle Raspberry Pi Modelle vorstelle.

Kauflink:
Bei diesen Links handelt es sich um sogenannte Affiliate-Links, bei denen ich eine Provision ausgeschüttet bekommen kann, sofern Ihr drüber bestellt. Nachteile entstehen euch dadurch nicht, aber Ihr könnt mich dadurch unterstützen 😀

► Raspberry Pi 3 Model B: http://amzn.to/2c1736D

► Raspberry Pi 2: http://amzn.to/2bBcycY

► Raspberry Pi Model B+: http://amzn.to/2bPFxec

► Raspberry Pi Model B: http://amzn.to/2bBbKVD

► Raspberry PI Model A+: http://amzn.to/2bsf9Kn

► Raspberry Pi Zero v1.3: http://amzn.to/2bsf6Oz

► Raspberry Pi Compute Module: http://amzn.to/2bK6VfK

Ich würde mich sehr über einen Daumen Freuen oder besser noch ein Abo und vergesst nicht, das Video mit Andren zu teilen. 🙂

———————————————————————
Meine Social Media Plattformen:
Es wird mich sehr Freuen wenn IHR mir FOLGT oder ein ABO in meinen Social Media Plattformen hinterlassen Könntet.

► Mein Kanal: https://www.youtube.com/c/fettonywelt

► Facebook: https://www.facebook.com/Fettony

► Twitter: https://twitter.com/fettony

► Twitch: https://www.twitch.tv/fettonylive

► Instagram: https://www.instagram.com/fettony/

► Tumblr: http://fettony.tumblr.com

► Snapchat: fettony99

———————————————————————
MEIN Equipment:
Bei diesen Links handelt es sich um sogenannte Affiliate-Links, bei denen ich eine Provision ausgeschüttet bekommen kann, sofern Ihr drüber bestellt. Nachteile entstehen euch dadurch nicht, aber Ihr könnt mich dadurch unterstützen 😀

► Kamera G70 mit Objektiv: http://amzn.to/2bnCLyq

► Manfrotto MT190XPRO3 Aluminium Stativ: http://amzn.to/2bFxBP1

► Manfrotto MVH502AH Pro Fluid Video Neiger: http://amzn.to/2bFxtyX

► Triopo C-258 Stativ: http://amzn.to/2bSghT7

► Andoer Kugelkopf: http://amzn.to/2bSgDcB

► Joby GorillaPod: http://amzn.to/2bEN11k

► AmazonBasics Rucksack: http://amzn.to/2bFxQJW

► Neewer Video-Licht: http://amzn.to/2cdM852

► Rode smartLav+ Mikrofon: http://amzn.to/2bFxHpB

► Rode TRRS auf TRS Adapter: http://amzn.to/2bFxXVN

———————————————————————
♫ MUSIK:
Die Musik ist von:

► Youtube-Library

► Oder Vexento: https://soundcloud.com/vexento

► Oder NoCopyrightSounds: https://soundcloud.com/nocopyrightsounds

———————————————————————
BILD Quellen:

► Pixabay: https://pixabay.com/

———————————————————————
Sorry !!!
Wenn ich was falsch geschrieben hab ich bin Legastheniker (Lese- Rechtschreib-Schwäche). source

Raspberry Pi Compute Module 3 (CM3) aims to gadgets

Sort of announced in July 2016, the recent Raspberry Pi Compute Module 3 (CM3) is assumed to get to the market very soon. Last October PC equipment company NEC already announced a new range of professional P and V Series large format displays that gracefully implant the RPi CM3 module. The new module, for sale in 2 versions – CM3 and CM3L (lite) – will complement the CM1 module introduced before.

Specs for the CM1, CM3 and CM3L SODIMM modules are located in the data sheet obtainable on the RPi webpage
https://www.raspberrypi.org/documentation/hardware/computemodule/RPI-CM-DATASHEET-V1_0.pdf
. Where the CM1 was driven by a BCM2835 CPU (as employed on the original RPi and RPi B+ models), the CM3 carries a quad-core 1.2 GHz BCM2837 processor, like the RPi 3. It consists of 1 GB of LPDDR2 RAM and 4 GB eMMC Flash. The ‘L’ version is a CM3 lacking eMMC Flash, encouraging the individual to link up his/her individual SD/eMMC system. The pinout of the CM1 and CM3 modules are exactly the same but the CM3 module is one mm higher (31 millimeters).

Pricing

The price tag on the new modules is not known yet, but because a CM1 retails at more or less £20, a matching price could possibly be anticipated for the CM3.

Founded upon : https://www.elektormagazine.com/news/raspberry-pi-compute-module-3-cm3-to-hit-the-market-soon

Technical Specs

The CM3 is based upon the Raspberry Pi 3 hardware and is intended for industrial use to offer a budget friendly means for people to make printed products based on the Pi hardware and software system. The Compute Module product line is more compact and has less features and ports than a standard Raspberry Pi, that makes it well suited for Internet of Things (IoT) products.

“The module makes use of a standard DDR2 SODIMM form factor, sockets for which are made by several manufacturers, are simply accessible, and also are low-priced,” Raspberry Pi COO and hardware lead James Adams mentioned in a blog post.

There are two choices of the CM3. And listed below are the specifications for both:

Standard Variant:

BCM2837 central processing unit at up to 1.2Gigahertz
1GB RAM
4GB of on-module eMMC flash

Lite Model:

BCM2837 processor at up to 1.2GHz
1GB RAM
Sdcard interface on Module pins which means that a customer can hook it up to an eMMC or Sdcard that they select

Both versions can be slotted into a newly released Compute Module IO Board V3 (CMIO3) which helps you to carry out the following:

Provides essential power to the CM3
Allows you to program the CM3 Standard’s flash memory or to work with an Sdcard on the Lite version.
Access the processor interfaces in a a bit more friendly fashion (pin headers and flexi connectors, similar to the Pi)
Offers the required HDMI and USB connectors so you have an entire system that can boot Raspbian (or maybe the Operating-system of your choosing).

“This board supplies both a starting template for those who want to design with the Compute Module, and a quick way to begin with tinkering with the hardware, and building and testing a system, before you go to the fee for fabricating a made to order board,” Adam said.

The older Compute Module model will continue to be available, for those who have no need for the CM3’s performance boost. Based on the Raspberry Pi official mag The MagPi:

“With a few caveats, the CM3 can be utilized a drop-in substitute for the CM1 as they are pin compatible; the CM3 is 1mm taller, however, while the CPU can pull way more current from the VBAT power line and definately will lead to a great deal more heat under heavy load.”

Raspberry Pi Compute Module 2 – running 32 LEDs and board close-ups



Raspberry Pi Compute Module 2 – running 32 LEDs and board close-ups. Blog article here http://raspi.tv/2014/raspberry-pi-compute-module-pt-2 source

Raspberry Pi Compute Module 3 (CM3) targets gadgets

Sort of announced in July 2016, the most up to date Raspberry Pi Compute Module 3 (CM3) is known to get to the market fastly. Last Oct PC equipment company NEC already announced a new spread of professional P and V Series large format displays that flawlessly implant the RPi CM3 module. The new module, obtainable in two flavors – CM3 and CM3L (lite) – will complement the CM1 module introduced some years ago.

Specifications for the CM1, CM3 and CM3L SODIMM modules can be found in the data sheet offered on the RPi internet site
https://www.raspberrypi.org/documentation/hardware/computemodule/RPI-CM-DATASHEET-V1_0.pdf
. Where the CM1 was based on a BCM2835 chip (as used on the original RPi and RPi B+ models), the CM3 sports a quad core 1.2 GHz BCM2837 central processing unit, like the RPi 3. It offers 1 Gigabyte of LPDDR2 RAM and 4 Gigabyte eMMC Flash. The ‘L’ version is a CM3 lacking eMMC Flash, allowing the buyer to connect his/her own SD/eMMC system. The pinout of the CM1 and CM3 modules are the same but the CM3 module is one millimeter higher (31 millimeters).

Price

The money necessary for the new modules isn’t known yet, but since a CM1 is sold at roughly £20, a similar price is likely to be predicted for the CM3.

Using : https://www.elektormagazine.com/news/raspberry-pi-compute-module-3-cm3-to-hit-the-market-soon

Specifications

The CM3 is based on the Raspberry Pi 3 hardware and is meant for industrial use to supply a inexpensive opportunity for people to make customized products based upon the Pi software and hardware platform. The Compute Module products is more compact and has less features and ports than a standard Raspberry Pi, allowing it to be suited to Internet of Things (IoT) products.

“The module utilizes a standard DDR2 SODIMM form factor, sockets for which are made by several makers, are comfortably accessible, and additionally are reasonable,” Raspberry Pi COO and hardware lead James Adams stated in a blog post.

You will find 2 variants of the CM3. Underneath are the specs for both:

Standard Variant:

BCM2837 central processor at up to 1.2Gigahertz
1Gigabyte RAM
4Gigabyte of on-module eMMC flash

Lite Model:

BCM2837 processor at up to 1.2GHz
1GB RAM
SD card interface on Module pins thus an individual can wire it up to an eMMC or SD card of their choice

Both variants can be slotted into a newly released Compute Module IO Board V3 (CMIO3) which helps you to perform the following:

Supplies essential power to the CM3
Allows you to program the CM3 Standard’s flash memory or to utilize an SD card on the Lite version.
Connect to the processor interfaces in a a little more friendly fashion (pin headers and flexi connectors, similar to the Pi)
Supplies the essential HDMI and USB connectors allowing you to have an entire system that can boot Raspbian (or the OS of your choosing).

“This board gives you both a starting template for those who want to design with the Compute Module, and a quick way to start tinkering with the hardware, and building and testing a system, before you go to the money necessary for making a custom board,” Adam said.

The older Compute Module model will continue to be delivered, for folks who do not need the CM3’s performance betterment. In line with the Raspberry Pi official mag The MagPi:

“With a couple of caveats, the CM3 can be utilized a drop-in substitute for the CM1 since they’re pin compatible; the CM3 is 1mm taller, nevertheless, while the CPU can pull a great deal more current from the VBAT power supply line and will definitely make a lot more heat under heavy load.”

Let Me Give You a Raspberry Pi [Maker Update #13]



This week on Maker Update: making your own 3D printed computer museum, Fusion 360 learns a new trick, a smoking laser sword, a new drawbot, a reason to buy a dental vacuform, and a giveaway for a full Raspberry Pi computer setup from our show sponsor, WD Labs.
SUBSCRIBE ON YOUTUBE: https://www.youtube.com/c/makerprojectlab?sub_confirmation=1

Project of the Week
Build a Mini Commodore PET
https://learn.adafruit.com/mini-commodore-pet-with-charlieplexed-led-matrix
3DP Tiny Computers
https://www.thingiverse.com/glitchpudding/collections/tiny-computers

News
Autodesk Blends Eagle and F360

Integrated @cadsofttech is coming to @ adskFusion360 #AU2016

Projects
Autodesk P9 AiR Showcase
Black Hole Table
http://www.instructables.com/id/Black-Hole-Table/
Periodic Table Lamp
http://www.instructables.com/id/3D-Periodic-Table/
Solar analemma chandelier
http://www.instructables.com/id/Solar-Analemma-Chandelier/

Tools/Tips
AxiDraw V3
http://www.evilmadscientist.com/2016/axidraw-v3/
Adafruit Time of Flight Boards
https://www.adafruit.com/products/3316
https://www.adafruit.com/products/3317
Dental Vacuform for Breadboards

Vacuum Formed Project Enclosure

Making some quick vacuum formed circuit board "enclosures" #vacuumforming #electronics

A post shared by Ben Light (@blight_design) on


http://amzn.to/2g0MnS9
MP4Museum is a Readymade Pi Image for Looping Videos in Galleries & Museums

‘MP4Museum’ is a Readymade Pi Image for Looping Videos in Galleries & Museums #piday #RaspberryPi


http://mp4museum.org/

-=Sponsored Products=-
WD PIDRIVE NODE ZERO
https://www.wdc.com/products/wdlabs/wd-pidrive-node-zero.html#WDLB033RNN
WD SMART CABLE MODULE
https://www.wdc.com/products/wdlabs/wd-smart-cable-module.html#WDLB031RNN
WD PIDRIVE COMPUTE CENTRE
https://www.wdc.com/products/wdlabs/wd-picompute-centre.html#WDLB032RNN
More on Pi Project Spaces
http://wdlabs.wd.com/global/docs/wd-pidrive-foundation-edition-project-spaces.pdf
http://lifehacker.com/the-pidrive-foundation-edition-is-an-external-hard-driv-1789145353

WD Labs Contest! Win a WD PIDRIVE COMPUTE CENTRE
Winner will be picked next week 12/14/2016. To enter, pitch donald@makerprojectlab.com with your Raspberry Pi project ideas and why you’re interested in making them.

Maker Faires

Find a Faire Near You


December 10 + 11, 2016 Bogotá Mini Maker Faire Columbia

Maker Update is a weekly video series that comes out every Wednesday morning, covering news, projects, tips, and events that will interest the maker and DIY community.

Find more online:
Blog: http://makerprojectlab.com
Facebook: http://fb.me/makerprojectlab
Instagram: https://www.instagram.com/makerprojectlab/

Send snail mail to:
Maker Project Lab
PO Box 1016
Alameda, CA 94501 source

Raspberry Pi Compute Module 3 (CM3) focuses on electronic gadgets

Sort of announced in July 2016, the new Raspberry Pi Compute Module 3 (CM3) is known to reach the market in the near future. Last October computer equipment maker NEC previously announced a new range of professional P and V Series large format displays that gracefully include the RPi CM3 module. The new module, offered in two versions – CM3 and CM3L (lite) – will complement the CM1 module launched some years ago.

Specifications for the CM1, CM3 and CM3L SODIMM modules may be found in the data sheet found on the RPi website
https://www.raspberrypi.org/documentation/hardware/computemodule/RPI-CM-DATASHEET-V1_0.pdf
. Where the CM1 was driven by a BCM2835 CPU (as used on the original RPi and RPi B+ models), the CM3 contains a quad-core 1.2 GHz BCM2837 processor, similar to the RPi 3. It provides 1 Gigabytes of LPDDR2 RAM and 4 Gigabytes eMMC Flash. The ‘L’ version is a CM3 not having eMMC Flash, allowing for the individual to link up his/her own SD/eMMC unit. The pinout of the CM1 and CM3 modules are exactly the same but the CM3 module is one mm higher (31 mm).

Cost

The money necessary for the new modules isn’t known yet, but because a CM1 is sold at roughly £20, a comparable price could very well be expected for the CM3.

Determined by : https://www.elektormagazine.com/news/raspberry-pi-compute-module-3-cm3-to-hit-the-market-soon

Specifications

The CM3 is based upon the Raspberry Pi 3 hardware and is created for industrial use to offer a inexpensive approach for people to make custom products based upon the Pi software and hardware platform. The Compute Module product line is smaller sized and has less benefits and ports than a standard Raspberry Pi, rendering it suited to Internet of Things (IoT) products.

“The module works with a standard DDR2 SODIMM form factor, sockets for which are made by several producers, are very easily available in the market, and are reasonably priced,” Raspberry Pi COO and hardware lead James Adams explained in a article.

There are 2 models of the CM3. And listed below are the specifications for both of them:

Standard Variant:

BCM2837 processor at up to 1.2Gigahertz
1Gigabyte RAM
4Gigabyte of on-module eMMC flash

Lite Model:

BCM2837 processor at up to 1.2GHz
1GB RAM
SD card interface on Module pins which means that a customer can connect this up to an eMMC or SD card of their choice

Both variants can be slotted into a newly released Compute Module IO Board V3 (CMIO3) which helps you to conduct the following:

Offers required power to the CM3
Enables you to program the CM3 Standard’s flash memory or to use an SD card on the Lite version.
Access the processor interfaces in a a bit more friendly fashion (pin headers and flexi connectors, just like the Pi)
Provides the needed HDMI and USB connectors allowing you to have an complete system which can boot Raspbian (or perhaps the Operating system of your preference).

“This board delivers both a starting template for those who want to design with the Compute Module, and a quick way to begin with experimenting with the hardware, and building and testing a system, before you go to the expense of making a made to order board,” Adam said.

The older Compute Module model will continue to be provided, for individuals that do not require the CM3’s performance turbocharge. According to the Raspberry Pi official magazine The MagPi:

“With some caveats, the CM3 may be used a drop-in replacement for the CM1 as they are pin compatible; the CM3 is 1mm taller, yet, while the CPU can pull a great deal more current from the VBAT power line and will definitely produce a lot more heat under heavy load.”

Raspberry Pi to Oculus Live Two cam Video Streaming



This video shows a fun little project where I stream live video from a raspberry pi compute module with two wide-angle-lens cameras to the oculus rift dk2. The viewer maps the video properly to get that nice telepresence feeling 🙂

More about the project:
http://torkeldanielsson.se/live-twocamera-video-stream-from-raspberry-pi-to-oculus-rift source

Raspberry Pi Compute Module 3 (CM3) targets on gadgets

Sort of announced in July 2016, the new Raspberry Pi Compute Module 3 (CM3) is known to go to the market soon. Last Oct . PC equipment maker NEC previously announced a new variety of professional P and V Series large format displays that seamlessly embed the RPi CM3 module. The new module, obtainable in 2 flavors – CM3 and CM3L (lite) – will complement the CM1 module launched some years ago.

Specs for the CM1, CM3 and CM3L SODIMM modules are available in the data sheet accessible on the RPi web page
https://www.raspberrypi.org/documentation/hardware/computemodule/RPI-CM-DATASHEET-V1_0.pdf
. Where the CM1 was driven by a BCM2835 processor (as used on the original RPi and RPi B+ models), the CM3 carries a quad-core 1.2 GHz BCM2837 processor, like the RPi 3. It has 1 Gigabytes of LPDDR2 RAM and 4 Gigabytes eMMC Flash. The ‘L’ version is a CM3 free of eMMC Flash, encouraging the person to install his/her own SD/eMMC device. The pinout of the CM1 and CM3 modules are the same but the CM3 module is one mm higher (31 millimeters).

Pricing

The price of the new modules is not known yet, but as a CM1 sells at around £20, a matching price might be estimated for the CM3.

Dependent on : https://www.elektormagazine.com/news/raspberry-pi-compute-module-3-cm3-to-hit-the-market-soon

Specifications

The CM3 is based upon the Raspberry Pi 3 hardware and is suitable for industrial use to provide a less expensive means for people to make printed products based on the Pi software and hardware platform. The Compute Module product line is more compact and has less options and ports than a regular Raspberry Pi, rendering it to suit Internet of Things (IoT) products.

“The module makes use of a standard DDR2 SODIMM form factor, sockets for which are made by several makers, are comfortably available, and additionally are low cost,” Raspberry Pi COO and hardware lead James Adams explained in a blog post.

There are 2 choices of the CM3. Here are the specifications for both of them:

Standard Version:

BCM2837 processor at as high as 1.2Gigahertz
1Gigabyte RAM
4Gigabyte of on-module eMMC flash

Lite Model:

BCM2837 processor at as high as 1.2GHz
1GB RAM
SD card interface on Module pins hence an end user can connect this up to an eMMC or SD card that they select

Both variants can be slotted into a newly released Compute Module IO Board V3 (CMIO3) which lets you perform the following:

Offers necessary power to the CM3
Allows you to program the CM3 Standard’s flash memory or to make use of an SD card on the Lite version.
Connect to the processor interfaces in a a little more friendly fashion (pin headers and flexi connectors, much like the Pi)
Supplies the required HDMI and USB connectors allowing you to have an whole system which can boot Raspbian (or maybe the Operating system of your choosing).

“This board gives both a starting template for those who want to design with the Compute Module, and a quick way to begin experimenting with the hardware, and building and testing a system, before you go to the cost of making a custom made board,” Adam said.

The older Compute Module model will continue to be available, for many who do not require the CM3’s performance boost. Based on the Raspberry Pi official mag The MagPi:

“With a few caveats, the CM3 can be used a drop-in substitute for the CM1 considering they are pin compatible; the CM3 is 1mm taller, nonetheless, while the CPU can pull much more current from the VBAT power line and will eventually result in a lot more heat under heavy load.”

Raspberry Pi 3 Super Computing Cluster Part 1 – Hardware List and Assembly



Part 2 – Software Configuration is now live! https://www.youtube.com/watch?v=eZ5uX-JJbyY

In celebration of crossing my 1,000,000th Einstein@Home Credit, I’m sharing how I built my Raspberry Pi 3 Cluster. Feel free to contact me with any questions.

B+ Mounting Hole Template:
http://www.raspberrypi-spy.co.uk/wp-content/uploads/2012/11/Raspberry-Pi-Mounting-Hole-Template.pdf

Parts List

Raspberry Pi 3 x 8
http://www.mcmelectronics.com/product/83-17300

Samsung EVO 16gb Micro SD Card x 8
http://www.microcenter.com/product/431733/16GB_microSD_Class_10_-_UHS-1_Flash_Memory_Card_with_Adapter

Raspberry Pi Heat Sink Kits x 4
https://www.amazon.com/gp/product/B018GBPCUC/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1

1′ Anker Powerline Micro USB Cables x 8
https://www.amazon.com/gp/product/B015XR60MQ/ref=oh_aui_detailpage_o09_s01?ie=UTF8&psc=1

100 Nylon Standoffs 10mm/6mm Male
https://www.amazon.com/gp/product/B00NQB8YU8/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

TrendNet TE100-S8 10/100 Switch
https://www.amazon.com/TRENDnet-Unmanaged-GREENnet-Ethernet-TE100-S8/dp/B000M2UZBK/ref=sr_1_1?ie=UTF8&qid=1470096082&sr=8-1&keywords=trendnet+te100-s8

USB to Type M Adapter Cable
https://www.amazon.com/gp/product/B003MQO96U/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1

1.5′ Cat 5 Cables x 3
https://www.amazon.com/gp/product/B00K5A5F00/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

1′ Cat 5 Cables x 5
https://www.amazon.com/iMBAPrice-Cat5e-Network-Ethernet-IMBA-CAT5-01BK-10PK/dp/B00HNV8ND0/ref=sr_1_1?s=pc&ie=UTF8&qid=1470096188&sr=1-1&keywords=1%27+cat5

10 Port USB Power Supply 60W or more
https://www.amazon.com/Anker-10-Port-Charger-Multi-Port-PowerPort/dp/B00YRYS4T4/ref=sr_1_1?s=pc&ie=UTF8&qid=1470096251&sr=1-1-spons&keywords=10+port+usb+charger&psc=1
https://www.amazon.com/Sabrent-Family-Sized-Charger-Technology-AX-TPCS-W/dp/B019GB57R4/ref=sr_1_5?s=pc&ie=UTF8&qid=1470096251&sr=1-5&keywords=10+port+usb+charger
https://www.amazon.com/ORICO-Charging-Station-Samsung-Motorola/dp/B00LN37VGY/ref=sr_1_32?s=pc&ie=UTF8&qid=1470096289&sr=1-32&keywords=10+port+usb+charger

AC Infinity Dual 80mm USB Cooling Fans
https://www.amazon.com/AC-Infinity-MULTIFAN-Receiver-Playstation/dp/B00IJ2J2K0/ref=sr_1_2?s=pc&ie=UTF8&qid=1470096385&sr=1-2&keywords=ac+infinity+80mm

Einstein@Home: https://https://einsteinathome.org
My Performance: https://www.einsteinathome.org/show_user.php?userid=750042 source

Raspberry Pi Compute Module 3 (CM3) aims to gadgets

Sort of announced in July 2016, the new Raspberry Pi Compute Module 3 (CM3) is assumed to hit the market quickly. Last Oct computer equipment company NEC previously announced a new spread of professional P and V Series large format displays that seamlessly embed the RPi CM3 module. The new module, available in two flavors – CM3 and CM3L (lite) – will complement the CM1 module launched before.

Specs for the CM1, CM3 and CM3L SODIMM modules appear in the data sheet offered on the RPi website
https://www.raspberrypi.org/documentation/hardware/computemodule/RPI-CM-DATASHEET-V1_0.pdf
. Where the CM1 was driven by a BCM2835 processor chip (as utilized on the original RPi and RPi B+ models), the CM3 contains a quad-core 1.2 GHz BCM2837 chip, like the RPi 3. It provides 1 Gigabyte of LPDDR2 RAM and 4 Gigabyte eMMC Flash. The ‘L’ version is a CM3 not having eMMC Flash, permitting the customer to link up his/her individual SD/eMMC device. The pinout of the CM1 and CM3 modules are exactly the same but the CM3 module is one mm higher (31 millimeters).

Price

The buying price of the new modules isn’t known yet, but because a CM1 is sold at roughly £20, a similar price could possibly be expected for the CM3.

Based upon : https://www.elektormagazine.com/news/raspberry-pi-compute-module-3-cm3-to-hit-the-market-soon

Specs

The CM3 is based on the Raspberry Pi 3 hardware and is created for industrial use in order to supply a cost efficient opportunity for people to make customized products based on the Pi software and hardware system. The Compute Module series is scaled-down and has less functions and ports than a regular Raspberry Pi, so that it is suited to Internet of Things (IoT) products.

“The module uses a standard DDR2 SODIMM form factor, sockets for which are made by a few makers, are conveniently available in the market, and also are cost-effective,” Raspberry Pi COO and hardware lead James Adams explained in a post.

There are 2 versions of the CM3. Listed below are the specifications for both of them:

Standard Version:

BCM2837 processor at to a maximum of 1.2GHz
1Gigabyte RAM
4Gigabyte of on-module eMMC flash

Lite Version:

BCM2837 processor at to a maximum of 1.2GHz
1GB RAM
SD card interface on Module pins for that reason an end user can wire it up to an eMMC or SD card of their choice

Both models can be slotted into a newly released Compute Module IO Board V3 (CMIO3) which lets you conduct the following:

Presents necessary power to the CM3
Permits you to program the CM3 Standard’s flash memory or to work with an SD card on the Lite version.
Connect to the processor interfaces in a slightly more friendly fashion (pin headers and flexi connectors, just like the Pi)
Offers the essential HDMI and USB connectors allowing you to have an entire system which can boot Raspbian (or perhaps the OS of your choosing).

“This board presents both a starting template for those who want to design with the Compute Module, and a fast way to get started on trying out the hardware, and building and testing a system, before you go to the expense of making a made to order board,” Adam said.

The older Compute Module model will still be offered, for individuals that wouldn’t like the CM3’s performance boost. As reported by the Raspberry Pi official mag The MagPi:

“With a couple of caveats, the CM3 can be utilized a drop-in replacement for the CM1 considering they are pin compatible; the CM3 is 1mm taller, on the other hand, while the CPU can pull a lot more current from the VBAT power source line and will eventually deliver a great deal more heat under heavy load.”

Older posts

© 2017 PCB Prototype

Up ↑