PCB Prototype

Rapid PCB Prototype Service

Tag: Raspberry Pi 3 (page 1 of 2)

How to setup a RetroPie – Raspberry Pi 3 – Emulator – Console – Canakit – Emulation Station



Enjoy the vids? Consider supporting me! Thank you, John! https://youtube.streamlabs.com/johnsarcade#/
Subscribe ►► https://www.youtube.com/subscription_center?add_user=blkdog7
Twitter ►► http://www.twitter.com/blkdog7

In this video we are going to take a Rasberry Pi 3 Canakit we purchased on Amazon to create a Retropie! That’s right, a retro console emulator using a Raspberry Pi! Retropie Tutorial 3.6!

In this video we will cover the following topics:

#1 – How to setup and install Retropie and Emulation Station on a Rasberry Pi 3 and SD card using the Retropie 3.6 Disk Image
#2 – Configuring RetroPie on a Raspberry Pi 3 using and HDMI cable with USB controller, USB keyboard, and USB mouse
#3 – Setting up Wi-Fi on a Raspberry Pi using Retropie
#4 – Copying ROM files from a Windows PC to the Raspberry 3 using Windows Explorer and FTP
#5 – Testing and playing games on the Raspberry Pi 3 and RetroPie Emulation
#6 – Testing and trying the NES, SNES, N64, Genesis, Megadrive, Atari 2600, and MAME emulators with RetroPie and the Rasberry Pi 3
#7 – Playing emulated games on RetroPie and the Raspberry Pi 3 including Donkey Kong, Asteroids Deluxe, Mortal Kombat, Kid Nikki, Banjo Kazooie, Goldeneye, Pitfall, Contra, and more!
#8 – Installing the Raspberry Pi 3 into a Canakit Case.
#9 – Installing heat sink on a Raspberry Pi 3
#10 – Using a USB NES, SNES, and Logitech analog stick controller with a Rasberry Pi 3 and RetroPie
#11 – Connecting a Rasberry Pi 3 via HDMI to a modern television TV
#12 – Using a MicroSD reader with Windows

Subscribe to Adam’s Channel here:
https://www.youtube.com/user/OneCircuit
====================================

Subscribe for new videos every Sunday! https://www.youtube.com/subscription_center?add_user=blkdog7

Follow me on Twitter: http://www.twitter.com/blkdog7

My other Youtube channel:
https://www.youtube.com/johnsucksatvideogames

My Twitch channel:
http://www.twitch.tv/blkdog7

My podcasts:

Home


http://www.arcadeoutsiders.com
http://www.yousuckshow.com

My Band, The Kill Screens:

https://www.amazon.com/Science-Fiction-Movie-Kill-Screens/dp/B005BGWG5A

https://itunes.apple.com/us/album/science-fiction-movie/id447957828

source

Raspberry Pi Substitutes: Reasons Why They’re a Greater Buy

Raspberry Pi is not the baddest small PC throughout the world, and it’s what its competitors are endeavoring to notify the remaining of the world. Now and then, a new mini computer is released in the marketplace promising to be the biggest one to conquer Raspberry Pi. The reality is, there’s a new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and charges $30.

The Raspberry Pi is released with four versions throughout the years. Included in these are Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most recent which is Pi 3 Model B.

Pi 3 was designed to ensure Raspberry Pi could be enough for anybody with a better value PC for programming. It has enhanced Processor with the Cortex A53, Hackaday stated, and runs on 1.2 GHz. At $35, the Raspberry Pi is the most chosen of all.

The Raspberry Pi, however, is not the only single board computer(SBC) for homebrewed projects. There are plenty more out there which is less expensive, and then some that can do more than Raspberry Pi for a bit more, ZD Net mentioned.

To start with, there’s the Omega 2, that includes a modular nature permitting software engineers to attach Wireless bluetooth or Gps navigation effortlessly. It has internal Wi-Fi and flash storage space; the Operating system is Linux distribution established on the OpenWrt system. The Omega 2 costs you $5 and can run on FreeBSD Operating system, which describe why it’s made for high school students.

The BBC Micro:bit costs you $16 and is best for school students for their studying and prototyping projects. A 32-bit ARM Cortex processor energizes it internally and it is different from the remaining due to the 5×5 LED matrix. This feature gives you 25 individually programmable red-colored LEDs for basic output.

There is also the BeagleBone Black, which costs you $55 and similar to the Raspberry Pi, is additionally a community-supported platform both for hobbyists and developers. It does work speedy; it can certainly boost Linux in under 10 seconds and can develop in under Five min’s. It’s motorized by AM335x 1GHz ARM Cortex-A8 combined with 512MB DDR3 RAM.

One more is the NanoPi M1 Plus, that has been referred to as as the new Raspberry Pi killer. At $30, it promises to have a sturdier design and layout and was ready to use essential options including Wi-Fi and Wireless bluetooth. It also includes an Infrared receiver, mic, 8GB storage, and power and reset buttons.

But, the most useful element of NanoPi M1 Plus is its power to run Ubuntu-Mate, Ubuntu-Core, and also Debian, Beta News stated. It is made for firm users, coders, enthusiasts, and school students.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Know more on official webpage: http://friendlyarm.com/index.php?route=product/product&product_id=176

You will find a new Raspberry Pi competitor that is quite cost-effective. To put it accurately, some folks might consider it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an certainly top-notch design and layout, along with valuable integrated features similar to Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Setup Or Fix Bluetooth PS3 Controller in Retropie Raspberry pi 3 2 1 or Zero



AMAZON LINKS
Buy a Raspberry Pi and accessories on Amazon

Raspberry Pi 3 – http://amzn.to/2gYPWIc

Raspberry Pi 3 Starter Kit – http://amzn.to/2gYKNQr

Best Raspberry Pi Case – http://amzn.to/2g0xqzk

Raspberry Pi 7 inch Touch screen – http://amzn.to/2gHoIFf

Setup Or Fix Bluetooth PS3 Controller in Retropie Raspberry pi 3 2 1 zero

source

Raspberry Pi Alternate Options: The Reason They Are a Better Buy

Raspberry Pi is not the baddest mini PC across the world, and it’s what its competitors are attempting to explain to the rest of the world. Now and then, a new mini computer is launched on the market promising to be the largest one to take down Raspberry Pi. In reality, there exists a new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and costs $30.

The Raspberry Pi is released with 4 variations in recent years. These comprise of Raspberry Pi Model B+, Pi 2 Model B, Zero, and the newest which is Pi 3 Model B.

Pi 3 was created to ensure that Raspberry Pi is able to please anybody with a well priced PC for developer work. It has enhanced CPU with the Cortex A53, Hackaday described, and runs on 1.2 GHz. At $35, the Raspberry Pi is the trendiest of all.

The Raspberry Pi, nevertheless, is not the only single board computer(SBC) for homebrewed projects. There are lots more available that be cheaper, and then some that can do more than Raspberry Pi for a bit more, ZD Net mentioned.

To start, there’s the Omega 2, that includes a modular nature letting coders to increase Wireless bluetooth or Gps navigation readily. It has in-built Wi-Fi and flash memory space; the OS is Linux distro derived from the OpenWrt program. The Omega 2 is priced at $5 and can likewise operate on FreeBSD OS, which describe why it is of great help for people in the course.

The BBC Micro:bit is priced at $16 and is just the thing for learners for their exercising and prototyping projects. A 32-bit ARM Cortex central processor powers it from inside and it shines from others in the industry because of the 5×5 LED matrix. This element provides 25 independently programmable red Led lights for basic output.

There’s also the BeagleBone Black, which is priced at $55 and like the Raspberry Pi, is additionally a community-supported platform both for amateurs and builders. It functions rapidly; it can boost Linux in below Ten seconds and can develop in under 5 min’s. It is actually motorized by AM335x 1GHz ARM Cortex-A8 and 512MB DDR3 RAM.

Yet another one is the NanoPi M1 Plus, that was referred to as as the most recent Raspberry Pi killer. At $30, it promises to have a more robust layout and design and was able to merge key capabilities for instance Wi-Fi and Wireless BT. In addition, it has got an IR receiver, microphone, 8GB storage, and power and reset switches.

And yet, the perfect feature of NanoPi M1 Plus is its ability to run Ubuntu-Mate, Ubuntu-Core, and even Debian, Beta News declared. It’s an excellent option for venture users, programmers, collectors, and learners.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi alternative

Get more information on official webpage: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

You will find there’s new Raspberry Pi contender that is quite cheap. In actual fact, many people might see it as a Pi alternative. The $30 FriendlyElec NanoPi M1 Plus has an arguably excellent layout and design, and crucial in-built features such as Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

LINX 3.0 – 04 | Setup Raspberry Pi 2/3



This tutorial describes the process of setting up a Raspberry Pi 2 or 3 as a LabVIEW target using LINX.

Checkout LabVIEW MakerHub for more tutorials and projects:
https://www.labviewmakerhub.com

Ask questions in the MakerHub forums at:
https://www.labviewmakerhub.com/forums

source

Raspberry Pi Substitutes: Reasons Why They Are a Better Buy

Raspberry Pi is not the baddest tiny computer around the globe, and it is what its competitors are endeavoring to explain to the remaining of the world. Now and then, a fresh mini computer is introduced on the market promising to be the biggest one to take down Raspberry Pi. In fact, there is a new Raspberry Pi killer known as NanoPi M1 Plus, which is Ubuntu-Linux ready and charges $30.

The Raspberry Pi is launched with 4 models as time passes. These consist of Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most recent which is Pi 3 Model B.

Pi 3 was designed to make sure that Raspberry Pi is able to delight anybody with a better value computer for developer work. It has improved Processor chip with the Cortex A53, Hackaday expressed, and runs on 1.2 GHz. Charging $35, the Raspberry Pi is the hottest-selling of all.

The Raspberry Pi, but nevertheless, is not the solely single board computer(SBC) for homebrewed projects. There are a variety more available which are cheaper, and then some that can do more than Raspberry Pi for a little more, ZD Net declared.

To start, there is the Omega 2, along with a modular nature allowing for software engineers to include Wireless bluetooth or Gps navigation incredibly easily. It has inbuilt Wi-Fi and flash memory space; the Operating-system is Linux distribution on top of the OpenWrt program. The Omega 2 costs you $5 and can easily operate on FreeBSD OS, that is why it’s beneficial to university students.

The BBC Micro:bit costs you $16 and is suitable for students for their training and prototyping projects. A 32-bit ARM Cortex processor chip drives it from the inside and it shines from the rest because of the 5×5 LED matrix. This feature presents 25 separately programmable red LEDs for basic output.

There is also the BeagleBone Black, which costs you $55 and exactly like the Raspberry Pi, is yet another community-supported platform both for lovers and developers. The system functions super fast; it can certainly boost Linux in only Ten seconds and can develop in less than 5 min’s. It’s motivated by AM335x 1GHz ARM Cortex-A8 and 512MB DDR3 RAM.

A fresh one is the NanoPi M1 Plus, which was referred to as as the new Raspberry Pi killer. Priced at $30, it promises to have a better layout and design and was capable to add useful functions just like Wi-Fi and Wireless bluetooth. In addition, it features an IR receiver, microphone, 8GB storage area, and power and reset buttons.

However, the most desirable function of NanoPi M1 Plus is its power to run Ubuntu-Mate, Ubuntu-Core, as well as Debian, Beta News expressed. It’s suited to firm users, programmers, lovers, and students.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi substitute

Discover more on official website: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

There is a new Raspberry Pi contender that is quite affordable. If truth be told, a number of people may consider it as a Pi substitute. The $30 FriendlyElec NanoPi M1 Plus has an certainly outstanding layout and design, along with valuable incorporated features including Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Raspberry Pi 3 Model B Overview & Setup | RS Components



http://uk.rs-online.com/web/generalDisplay.html?id=raspberrypi

Learn how to get started with your Raspberry Pi3 model. The New Raspberry Pi comes with a Broadcom BCM2387 chipset and has a 64Bit, 1.2GHz Quad-Core ARM Cortex-A53 802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and BLE).
You can see how to connect all your interfaces and update and download the latest operating system onto your NOOBS.

Watch a comparison of Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B here: the https://www.youtube.com/watch?v=45Mls8BCgtE

source

Raspberry Pi Alternate Options: The Reason They’re a Greater Buy

Raspberry Pi isn’t the baddest mini computer internationally, and it is what its challengers are attempting to say to the rest of the world. Now and then, a new mini computer is launched out there promising to be the largest one to take down Raspberry Pi. In fact, there exists a new Raspberry Pi killer referred to as NanoPi M1 Plus, which is Ubuntu-Linux ready and priced at $30.

The Raspberry Pi is introduced with four variants over the years. They include Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most recently released which is Pi 3 Model B.

Pi 3 was designed to make certain Raspberry Pi is able to please a person with a low cost computer for coding. It’s replaced Processor with the Cortex A53, Hackaday announced, and runs on 1.2 GHz. Costing $35, the Raspberry Pi is the best of all.

The Raspberry Pi, having said that, isn’t the sole single board computer(SBC) for homebrewed projects. There are plenty more available which be cheaper, and then some that can do more than Raspberry Pi for a little more, ZD Net announced.

For starters, there’s the Omega 2, that features a modular nature making it possible for developers to increase Bluetooth or Gps navigation comfortably. It has constructed in Wi-Fi and flash memory; the Operating system is Linux distribution based upon the OpenWrt program. The Omega 2 costs you $5 and can easily run on FreeBSD Operating system, which explains why it is really useful for school students.

The BBC Micro:bit costs you $16 and is good for school students for their studying and prototyping projects. A 32-bit ARM Cortex processor powers it from the inside and it sticks out from the others simply because of its 5×5 LED matrix. This attribute presents 25 singularly programmable red-colored Led lights for basic output.

There is also the BeagleBone Black, which costs you $55 and like the Raspberry Pi, is one more community-supported platform both for amateurs and programmers. It functions speedy; it could boost Linux in less than 10 seconds and can develop in within 5 min’s. It is actually driven by AM335x 1GHz ARM Cortex-A8 combined with 512MB DDR3 RAM.

Yet another one is the NanoPi M1 Plus, which has been referred to as as the new Raspberry Pi killer. At $30, it promises to have a better made layout and design and was capable to assimilate vital functions similar to Wi-Fi and Bluetooth. It also consists of an IR receiver, mic, 8GB storage space, and power and reset control buttons.

However, the finest element of NanoPi M1 Plus is its capacity to run Ubuntu-Mate, Ubuntu-Core, as well as Debian, Beta News published. It’s useful for company users, developers, hobbyists, and school students.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Uncover more on official website: http://friendlyarm.com/index.php?route=product/product&product_id=176

There is a new Raspberry Pi contender that is quite low-priced. To put it accurately, some people might view it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an arguably top-quality layout and design, and essential built-in features including Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Raspberry pi 3 – install Raspbian using mac os x



Raspberry pi 3 set up using Mac.
It is pretty easy and fast.

raspberry pi
http://amzn.to/2lkEckA

source

Raspberry Pi Alternatives: Why They Are a Better Buy

Raspberry Pi is not the baddest mini PC worldwide, and it is what its challengers are wanting to inform the remaining of the world. Now and then, a new mini computer is introduced in the marketplace promising to be the biggest one to take down Raspberry Pi. In actual fact, you will find there’s new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and costs you $30.

The Raspberry Pi is released with four models over time. These consist of Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most recently released which is Pi 3 Model B.

Pi 3 was established to confirm that Raspberry Pi is able to be enough for anybody with a lower priced PC for programming. It’s upgraded Processor chip with the Cortex A53, Hackaday mentioned, and runs on 1.2 GHz. Costing $35, the Raspberry Pi is the most chosen of all.

The Raspberry Pi, nevertheless, is not the single single board computer(SBC) for homebrewed projects. There are plenty more available on the market that cost less, and then some that can do more than Raspberry Pi for some extra, ZD Net published.

To begin with, there is the Omega 2, which includes a modular nature letting programmers to introduce Bluetooth or GPS quite simply. It has built-in Wi-Fi and flash storage area; the Operating-system is Linux distribution established on the OpenWrt system. The Omega 2 charges $5 and can operate on FreeBSD Operating-system, and that’s why it truly is created for learners.

The BBC Micro:bit charges $16 and is just the thing for students for their learning and prototyping projects. A 32-bit ARM Cortex central processor drives it from inside and it is different from the remaining for the 5×5 LED matrix. This function offers 25 independently programmable red-colored LEDs for basic output.

Plus, there is the BeagleBone Black, which charges $55 and exactly like the Raspberry Pi, is also a community-supported platform both for hobbyists and designers. It truly does work super fast; it can certainly boost Linux in around 10 seconds and can develop in below 5 minutes. It is pushed by AM335x 1GHz ARM Cortex-A8 coupled with 512MB DDR3 RAM.

A fresh one is the NanoPi M1 Plus, which has been titled as the new Raspberry Pi killer. At $30, it promises to have a better made design and layout and was ready to include beneficial elements including Wi-Fi and Wireless BT. It also presents an IR receiver, microphone, 8GB storage, and power and reset buttons.

On the other hand, the most excellent function of NanoPi M1 Plus is its capacity to run Ubuntu-Mate, Ubuntu-Core, and also Debian, Beta News stated. It is useful for business users, programmers, enthusiasts, and students.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi alternative

Know more on official web site: http://friendlyarm.com/index.php?route=product/product&product_id=176

There is a new Raspberry Pi challenger that is quite cost-effective. The reality is, some people may consider it as a Pi alternative. The $30 FriendlyElec NanoPi M1 Plus has an arguably exceptional design and layout, and critical integrated features just like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Install Bluetooth for Raspberry Pi 3/Raspbian Jessie



To use the built-in Bluetooth of Raspberry Pi 3/Raspbian Jessie, we have to install some software:
$ sudo apt-get install pi-bluetooth
$ sudo apt-get install bluetooth bluez blueman
Then reboot.

This video show how to send/receive file between raspberry Pi 3/Raspbian Jessie and PC running Windows 10.
http://helloraspberrypi.blogspot.com/2016/03/setup-bluetooth-for-raspberry-pi.html

source

Raspberry Pi Alternatives: The Reason Why They’re a Better Buy

Raspberry Pi is not the baddest small computer on the earth, and it’s what its opponents are seeking to convey to the remaining of the world. Now and then, a new mini computer is released out there promising to be the biggest one to overcome Raspberry Pi. Believe it or not, there exists a new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and costs you $30.

The Raspberry Pi is released with four models through the years. Included in these are Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most recent which is Pi 3 Model B.

Pi 3 was created to make certain Raspberry Pi has the ability to delight anybody with a low-priced computer for programming. It has up-graded Processor chip with the Cortex A53, Hackaday stated, and runs on 1.2 GHz. At $35, the Raspberry Pi is the most well liked of all.

The Raspberry Pi, even so, is not the sole single board computer(SBC) for homebrewed projects. There are tons more in the market that are less expensive, and then some that can do more than Raspberry Pi for a little more, ZD Net expressed.

To begin with, there’s the Omega 2, with a modular nature encouraging computer programmers to increase Bluetooth or Global positioning systems conveniently. It has in-built Wi-Fi and flash memory space; the Operating system is Linux distro based on the OpenWrt system. The Omega 2 costs $5 and can even run on FreeBSD Operating system, and that is why it really is worthwhile for college students.

The BBC Micro:bit costs $16 and is best for school students for their learning and prototyping projects. A 32-bit ARM Cortex cpu energizes it from the inside and it stands out from the rest simply because of its 5×5 LED matrix. This function gives you 25 singularly programmable red-colored LEDs for basic output.

In addition, there is the BeagleBone Black, which costs $55 and exactly like the Raspberry Pi, is additionally a community-supported platform both for enthusiasts and coders. The system functions fast; it does boost Linux in only 10 seconds and can develop in less than 5 minutes. It’s motorized by AM335x 1GHz ARM Cortex-A8 coupled with 512MB DDR3 RAM.

Another one is the NanoPi M1 Plus, that was called as the most recently released Raspberry Pi killer. At $30, it promises to have a tougher layout and design and was capable to merge important functions for example Wi-Fi and Wireless BT. In addition, it has an IR receiver, microphone, 8GB memory space, and power and reset keys.

Yet, the most desirable element of NanoPi M1 Plus is its capability to run Ubuntu-Mate, Ubuntu-Core, and Debian, Beta News declared. It is great for business users, developers, enthusiasts, and school students.

nanopi m1 plus specs

FriendlyElec launches Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi substitute

Get more info on official webpage: http://friendlyarm.com/index.php?route=product/product&product_id=176

There is a new Raspberry Pi opponent that is quite cheap. For that matter, many people might consider it as a Pi substitute. The $30 FriendlyElec NanoPi M1 Plus has an arguably remarkable layout and design, and important integrated features similar to Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

How To Install KODI On a Raspberry Pi 3



Here is how to install Kodi on the new Raspberry Pi 3 using OpenELEC. http://www.wirelesshack.org/how-to-install-kodi-on-a-raspberry-pi-3.html

source

Raspberry Pi Substitutes: Why They’re a Better Buy

Raspberry Pi is not the baddest mini PC on the globe, and it is what its challengers are trying to tell the rest of the world. Now and then, a new mini computer is launched on the market promising to be the biggest one to defeat Raspberry Pi. If truth be told, there exists a new Raspberry Pi killer named NanoPi M1 Plus, which is Ubuntu-Linux ready and priced at $30.

The Raspberry Pi is launched with 4 variations in the past. These consist of Raspberry Pi Model B+, Pi 2 Model B, Zero, and the latest which is Pi 3 Model B.

Pi 3 was made to confirm that Raspberry Pi has the ability to delight anybody with a well priced PC for coding. It has improved Processor chip with the Cortex A53, Hackaday expressed, and runs on 1.2 GHz. At $35, the Raspberry Pi is the most sought-after of all.

The Raspberry Pi, nevertheless, is not the single single board computer(SBC) for homebrewed projects. There are a variety more on the market that will cost less, and then some that can do more than Raspberry Pi for a bit more, ZD Net expressed.

To start, there’s the Omega 2, sporting a modular nature enabling programmers to increase Bluetooth or Gps system incredibly easily. It has in-built Wi-Fi and flash storage space; the Operating-system is Linux distro established on the OpenWrt system. The Omega 2 costs you $5 and can also operate on FreeBSD Operating-system, and that is why it is really created for students.

The BBC Micro:bit costs you $16 and is good for school students for their training and prototyping projects. A 32-bit ARM Cortex central processor energizes it internally and it stands apart from the others for the 5×5 LED matrix. This feature gives 25 independently programmable red Led lights for basic output.

There is also the BeagleBone Black, which costs you $55 and similar to the Raspberry Pi, is also a community-supported platform both for hobbyists and builders. It really works speedy; it does boost Linux in only 10 seconds and can develop in within Five minutes. It’s pushed by AM335x 1GHz ARM Cortex-A8 plus 512MB DDR3 RAM.

One more is the NanoPi M1 Plus, that was referred to as as the new Raspberry Pi killer. At $30, it promises to have a better design and layout and was in a position to combine beneficial abilities for instance Wi-Fi and Bluetooth. Furthermore, it has got an IR receiver, microphone, 8GB memory space, and power and reset buttons.

On the other hand, the most useful function of NanoPi M1 Plus is its ability to run Ubuntu-Mate, Ubuntu-Core, and even Debian, Beta News published. It is good for business users, coders, hobbyists, and school students.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Find out more on official webpage: http://friendlyarm.com/index.php?route=product/product&product_id=176

You will find there’s new Raspberry Pi competitor that is quite low-priced. In reality, a number of people might view it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an arguably excellent design and layout, along with important in-built features just like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Noobs Installation Tutorial



Buy your Raspberry Pi 3 Starter Kit Here:
http://go.magik.ly/ml/2ips/

If you’re anything like me you’ve had a Raspberry Pi sitting on your shelf for a while and you’re not quite sure what to do with it. Well I’m here to show you what you can do.

I’m MrVestek and your Raspberry Pi Ally. Back once again and better than ever as I’ve been upgraded to version 3.0!

In this tutorial we show you how to install Noobs on your Raspberry Pi which is your first step in installing the many wonderful operating systems available for The Raspberry Pi 3!

With built in Bluetooth and WiFi this device is now a little powerhouse with multiple possibilities.

Tune in for Episode 2 available soon where we will build our own home entertainment centre using Openelec.

Don’t know how to use Linux? No problem, this tutorial doesn’t require any prior Linux knowledge, I’ve tried to make it as easy as possible to follow!

Required software:
SD Card Formatter Tool – https://www.sdcard.org/downloads/formatter_4/
Noobs – https://www.raspberrypi.org/downloads/noobs/

Music Credits:
8bit Dungeon Level – Kevin MacLeod (http://www.incompetech.com)
Just Keep Intro Bits – Teknoaxe (http://www.teknoaxe.com)
Hero’s Day Off – Teknoaxe (http://www/teknoaxe.com)

source

Raspberry Pi Substitutes: Reasons Why They Are a Greater Buy

Raspberry Pi is not the baddest tiny PC on the planet, and it’s what its opponents are trying to tell the remainder of the world. Now and then, a fresh mini computer is released out there promising to be the largest one to take down Raspberry Pi. In actual fact, you will find there’s new Raspberry Pi killer named NanoPi M1 Plus, which is Ubuntu-Linux ready and charges $30.

The Raspberry Pi is released with four variations throughout the years. These comprise of Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most recent which is Pi 3 Model B.

Pi 3 is built to make certain that Raspberry Pi is able to delight anyone with a well priced PC for programming. It’s improved CPU with the Cortex A53, Hackaday reported, and runs on 1.2 GHz. Costing $35, the Raspberry Pi is the best selling of all.

The Raspberry Pi, even so, is not the only single board computer(SBC) for homebrewed projects. There are lots more in the market which be less expensive, and then some that can do more than Raspberry Pi for a little bit more, ZD Net described.

To begin with, there’s the Omega 2, sporting a modular nature making it possible for software engineers to incorporate Wireless bluetooth or GPS easily. It has in-built Wi-Fi and flash memory space; the Operating system is Linux distribution stemmed from the OpenWrt system. The Omega 2 costs $5 and can easily operate on FreeBSD Operating system, and that is why it truly is a good choice for college students.

The BBC Micro:bit costs $16 and is appropriate for school students for their learning and prototyping projects. A 32-bit ARM Cortex cpu powers it from inside and it stands out from the others simply because of its 5×5 LED matrix. This benefit gives you 25 individually programmable red LEDs for basic output.

There is also the BeagleBone Black, which costs $55 and just like the Raspberry Pi, is one more community-supported platform both for fans and designers. It functions quickly; it is able to boost Linux in less than 10 seconds and can develop in within 5 minutes. It is actually pushed by AM335x 1GHz ARM Cortex-A8 combined with 512MB DDR3 RAM.

Someone else is the NanoPi M1 Plus, that was known as as the most current Raspberry Pi killer. Priced at $30, it promises to have a better made design and layout and was able to add critical abilities such as Wi-Fi and Wireless BT. In addition, it possesses an Infrared receiver, mic, 8GB storage, and power and reset switches.

On the other hand, the top function of NanoPi M1 Plus is its capacity to run Ubuntu-Mate, Ubuntu-Core, and also Debian, Beta News announced. It’s well suited for firm users, programmers, enthusiasts, and school students.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Know more on official webpage: http://friendlyarm.com/index.php?route=product/product&product_id=176

There is a new Raspberry Pi competitor that is quite budget friendly. In fact, some individuals may see it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an certainly excellent design and layout, as well as essential incorporated features such as Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Raspberry Pi Tutorial Reihe – Einführung Alle Modelle [4K] [Deutsch]



Mit diesen Video Begine ich mein Raspberry Pi Reihe in den ich alle Raspberry Pi Modelle vorstelle.

Kauflink:
Bei diesen Links handelt es sich um sogenannte Affiliate-Links, bei denen ich eine Provision ausgeschüttet bekommen kann, sofern Ihr drüber bestellt. Nachteile entstehen euch dadurch nicht, aber Ihr könnt mich dadurch unterstützen 😀

► Raspberry Pi 3 Model B: http://amzn.to/2c1736D

► Raspberry Pi 2: http://amzn.to/2bBcycY

► Raspberry Pi Model B+: http://amzn.to/2bPFxec

► Raspberry Pi Model B: http://amzn.to/2bBbKVD

► Raspberry PI Model A+: http://amzn.to/2bsf9Kn

► Raspberry Pi Zero v1.3: http://amzn.to/2bsf6Oz

► Raspberry Pi Compute Module: http://amzn.to/2bK6VfK

Ich würde mich sehr über einen Daumen Freuen oder besser noch ein Abo und vergesst nicht, das Video mit Andren zu teilen. 🙂

———————————————————————
Meine Social Media Plattformen:
Es wird mich sehr Freuen wenn IHR mir FOLGT oder ein ABO in meinen Social Media Plattformen hinterlassen Könntet.

► Mein Kanal: https://www.youtube.com/c/fettonywelt

► Facebook: https://www.facebook.com/Fettony

► Twitter: https://twitter.com/fettony

► Twitch: https://www.twitch.tv/fettonylive

► Instagram: https://www.instagram.com/fettony/

► Tumblr: http://fettony.tumblr.com

► Snapchat: fettony99

———————————————————————
MEIN Equipment:
Bei diesen Links handelt es sich um sogenannte Affiliate-Links, bei denen ich eine Provision ausgeschüttet bekommen kann, sofern Ihr drüber bestellt. Nachteile entstehen euch dadurch nicht, aber Ihr könnt mich dadurch unterstützen 😀

► Kamera G70 mit Objektiv: http://amzn.to/2bnCLyq

► Manfrotto MT190XPRO3 Aluminium Stativ: http://amzn.to/2bFxBP1

► Manfrotto MVH502AH Pro Fluid Video Neiger: http://amzn.to/2bFxtyX

► Triopo C-258 Stativ: http://amzn.to/2bSghT7

► Andoer Kugelkopf: http://amzn.to/2bSgDcB

► Joby GorillaPod: http://amzn.to/2bEN11k

► AmazonBasics Rucksack: http://amzn.to/2bFxQJW

► Neewer Video-Licht: http://amzn.to/2cdM852

► Rode smartLav+ Mikrofon: http://amzn.to/2bFxHpB

► Rode TRRS auf TRS Adapter: http://amzn.to/2bFxXVN

———————————————————————
♫ MUSIK:
Die Musik ist von:

► Youtube-Library

► Oder Vexento: https://soundcloud.com/vexento

► Oder NoCopyrightSounds: https://soundcloud.com/nocopyrightsounds

———————————————————————
BILD Quellen:

► Pixabay: https://pixabay.com/

———————————————————————
Sorry !!!
Wenn ich was falsch geschrieben hab ich bin Legastheniker (Lese- Rechtschreib-Schwäche). source

Raspberry Pi Compute Module 3 (CM3) aims to gadgets

Sort of announced in July 2016, the recent Raspberry Pi Compute Module 3 (CM3) is assumed to get to the market very soon. Last October PC equipment company NEC already announced a new range of professional P and V Series large format displays that gracefully implant the RPi CM3 module. The new module, for sale in 2 versions – CM3 and CM3L (lite) – will complement the CM1 module introduced before.

Specs for the CM1, CM3 and CM3L SODIMM modules are located in the data sheet obtainable on the RPi webpage
https://www.raspberrypi.org/documentation/hardware/computemodule/RPI-CM-DATASHEET-V1_0.pdf
. Where the CM1 was driven by a BCM2835 CPU (as employed on the original RPi and RPi B+ models), the CM3 carries a quad-core 1.2 GHz BCM2837 processor, like the RPi 3. It consists of 1 GB of LPDDR2 RAM and 4 GB eMMC Flash. The ‘L’ version is a CM3 lacking eMMC Flash, encouraging the individual to link up his/her individual SD/eMMC system. The pinout of the CM1 and CM3 modules are exactly the same but the CM3 module is one mm higher (31 millimeters).

Pricing

The price tag on the new modules is not known yet, but because a CM1 retails at more or less £20, a matching price could possibly be anticipated for the CM3.

Founded upon : https://www.elektormagazine.com/news/raspberry-pi-compute-module-3-cm3-to-hit-the-market-soon

Technical Specs

The CM3 is based upon the Raspberry Pi 3 hardware and is intended for industrial use to offer a budget friendly means for people to make printed products based on the Pi hardware and software system. The Compute Module product line is more compact and has less features and ports than a standard Raspberry Pi, that makes it well suited for Internet of Things (IoT) products.

“The module makes use of a standard DDR2 SODIMM form factor, sockets for which are made by several manufacturers, are simply accessible, and also are low-priced,” Raspberry Pi COO and hardware lead James Adams mentioned in a blog post.

There are two choices of the CM3. And listed below are the specifications for both:

Standard Variant:

BCM2837 central processing unit at up to 1.2Gigahertz
1GB RAM
4GB of on-module eMMC flash

Lite Model:

BCM2837 processor at up to 1.2GHz
1GB RAM
Sdcard interface on Module pins which means that a customer can hook it up to an eMMC or Sdcard that they select

Both versions can be slotted into a newly released Compute Module IO Board V3 (CMIO3) which helps you to carry out the following:

Provides essential power to the CM3
Allows you to program the CM3 Standard’s flash memory or to work with an Sdcard on the Lite version.
Access the processor interfaces in a a bit more friendly fashion (pin headers and flexi connectors, similar to the Pi)
Offers the required HDMI and USB connectors so you have an entire system that can boot Raspbian (or maybe the Operating-system of your choosing).

“This board supplies both a starting template for those who want to design with the Compute Module, and a quick way to begin with tinkering with the hardware, and building and testing a system, before you go to the fee for fabricating a made to order board,” Adam said.

The older Compute Module model will continue to be available, for those who have no need for the CM3’s performance boost. Based on the Raspberry Pi official mag The MagPi:

“With a few caveats, the CM3 can be utilized a drop-in substitute for the CM1 as they are pin compatible; the CM3 is 1mm taller, however, while the CPU can pull way more current from the VBAT power line and definately will lead to a great deal more heat under heavy load.”

Raspberry Pi 3 KODI Streaming Tutorial/Setup



*Intro
*Remote
*Movie/Tv show plugin
*Skins
*10 bit video/x265 720p 1080p playback

Specto source url:http://filmkodi.com/repository
Kodi: Openelec 6.0.3:http://openelec.tv
Yatse Remote:https://play.google.com/store/apps/details?id=org.leetzone.android.yatsewidgetfree

Have fun!

source

Raspberry Pi Alternate Options: Reasons Why They’re a Greater Buy

Raspberry Pi is not the baddest micro computer globally, and it’s what its contenders are seeking to inform the rest of the world. Now and then, a new mini computer is released out there promising to be the largest one to overcome Raspberry Pi. In fact, there exists a new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and costs you $30.

The Raspberry Pi is launched with 4 variations as time has passed. Examples of these are Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most up-to-date which is Pi 3 Model B.

Pi 3 was made to make certain that Raspberry Pi can delight anyone with a well priced computer for developer work. It’s up-graded Processor with the Cortex A53, Hackaday explained, and runs on 1.2 GHz. At $35, the Raspberry Pi is the most widely used of all.

The Raspberry Pi, having said that, is not the merely single board computer(SBC) for homebrewed projects. There are lots more in the industry which be less expensive, and then some that can do more than Raspberry Pi for a bit more, ZD Net explained.

Firstly, there’s the Omega 2, having a modular nature permitting computer programmers to integrate Bluetooth or GPS effortlessly. It has constructed in Wi-Fi and flash storage; the OS is Linux distribution based on the OpenWrt system. The Omega 2 will cost you $5 and can likewise run on FreeBSD OS, which describes why it’s well suited for students.

The BBC Micro:bit will cost you $16 and is excellent for learners for their studying and prototyping projects. A 32-bit ARM Cortex processor chip powers it from inside and it is different from the remaining simply because of its 5×5 LED matrix. This attribute gives you 25 individually programmable red LEDs for basic output.

On top of that, there is the BeagleBone Black, which will cost you $55 and exactly like the Raspberry Pi, is another community-supported platform both for enthusiasts and coders. It works fast; it can actually boost Linux in lower than 10-seconds and can develop in within 5 minutes. It is actually pushed by AM335x 1GHz ARM Cortex-A8 plus 512MB DDR3 RAM.

One more is the NanoPi M1 Plus, which was called as the most recently released Raspberry Pi killer. At $30, it promises to have a tougher design and layout and was ready to use notable options for example Wi-Fi and Bluetooth. Further, it possesses an IR receiver, mic, 8GB memory space, and power and reset switches.

And yet, the most desirable element of NanoPi M1 Plus is its power to run Ubuntu-Mate, Ubuntu-Core, as well as Debian, Beta News reported. It’s perfect for venture users, developers, amateurs, and learners.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Learn more on official website: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

You will find a new Raspberry Pi opponent that is quite economical. The reality is, some individuals might see it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an certainly excellent design and layout, along with valuable incorporated features just like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Older posts

© 2017 PCB Prototype

Up ↑