PCB Prototype

Rapid PCB Prototype Service

Tag: Printed Circuit Boards (page 1 of 2)

Surface Mount Technology Assembly Line

July 21, 2017 / / 0 Comments



Surface Mount Technology Assembly Line at Marl International, Cumbria.

The new Marl production line at Ulverston can assemble 22,000 surface mount components per hour including LED diodes onto printed circuit boards (PCBs). At the front end, it has a Nutek NTE0710XL single magazine line loader. It also features a DEK03iX SMT Screen Printer, which respects the environment by using a water-soluble agent to clean the underside of the screen / foil combined with a vacuum system, eliminating the need for chemical cleaners. It also has a Mydata MY9 SMT Placer and a BTU 100a oven.

Website: www.leds.co.uk

source

Four Tricks to Finding a Small-volume PCB Assembly Manufacturer

pwb assy

Working with small-volume PCB assemblies has its upsides and drawbacks. As the customer, there are a few pointers that will allow you to get the most out of your assembly. In this post, we are going to explain how to make use of the benefits and approaches to stay clear of the shortcomings.

Find out how to Select a Small-volume PCB Assembly Manufacturer?

The ideas mentioned below should help you maximum benefit out of your small-volume PCB assembly order.

1. Just One Manufacturer

Pick out a small-volume PCB manufacturer who can be a one-stop service provider for all of your PCB requirements. The main benefit of working with a small order is basically you don’t have to coordinate with several organizations or individuals. Your order can be treated by a single point of contact.

2. Great need of Prototypes

Even when working with small orders, you must require use of prototypes – despite that it comes at an additional expenditure. Prototypes will allow you to verify your design and make improvements to it, if required.

3. Small-volume PCB Manufacturer

pwb assy

Fabricating small-volume PCB assemblies could be a task when hiring an unskilled manufacturer. Since the order quantity is low, expense of production will likely be to some degree higher. Therefore, any mistake on the part of the PCB manufacturer will mean larger losses for the client.

4. Standard PCB Practices

Standard best practices involving PCB manufacturing should be taken regardless if working with a small-volume PCB assembly. This consists of design, fabricating, assembly, as well as PCBA testing procedures.

Working with a small-volume PCB assembly has its own variety of perks. Utilizing standard recommendations will assist you to build an order that will help you in the long run.

SOLIDWORKS PCB: Assembly Variants

July 18, 2017 / / 0 Comments



Developing and managing multiple product configurations from one PCB project is done through Variants in SOLIDWORKS PCB. Use Assembly Variants to un-install components or even completely load a different component, as an alternative replacement part onto the same PCB. This is can be done while automating the multiple assembly files required for each configuration including BOM, pick and place, PCB assembly drawings and schematics. Variants eliminates the need to create a unique version of the design for each variation. Learn more: Learn more about ECAD/MCAD collaboration: http://solidworkspcb.com/

source

Four Tricks to Picking a Low-volume PCB Assembly Fabricator

printed circuit board assemblies

Working with small-volume PCB assemblies has its advantages and disadvantages. As the customer, there are several hints that will allow you to obtain the most out of your assembly. In this posting, we will explain how to maximize the positives and the ways to move around the negative aspects.

The way to Decide on a Low-volume PCB Assembly Fabricator?

The information talked about just below should help you get the most from your small-volume PCB assembly order.

1. Single Service Provider

Pick out a small-volume PCB maker who could be a one-stop provider for all your PCB needs. The advantage of working with a small order is basically you don’t need to coordinate with several organizations or individuals. Your order can be treated by a single point of contact.

2. Value of Prototypes

Although working with small orders, you must require use of prototypes – though it results in an added cost. Prototypes will allow you to check your design and make improvements to it, at will.

3. Low-volume PCB Fabricator

printed circuit board assemblies

Fabricating small-volume PCB assemblies could be a task when using the services of an unsophisticated maker. For the reason that order quantity is low, cost of production will likely be more or less higher. Accordingly, any mistake by the PCB maker will lead to increased losses for the buyer.

4. Standard PCB Practices

Standard tips concerning PCB manufacturing really should be followed despite the fact that working with a small-volume PCB assembly. This can include design, fabrication, assemblage, and also PCBA testing processes.

Working with a small-volume PCB assembly has its own group of plus points. Implementing standard tips will assist you to build an order that will help you eventually.

Garner-Osborne-PCB-Assembly.wmv

June 23, 2017 / / 0 Comments



Garner Osborne PCB Assembly and manufacturing experts from Newbury in Berkshire, demonstrate how the latest in PCB manufacturing technology can not only streamline the process efficiently but also ensure the best possible results.

source

4 Tricks to Deciding on a Low-quantity PCB Assembly Manufacturer

pcb board assembly

Working with small-quantity PCB assemblies has its upsides and cons. As the consumer, there are several helpful tips that will help you make the most out of your assembly. In this post, we’re going to explain how to make use of the possible benefits and the ways to bypass the problems.

How one can Pick a Low-quantity PCB Assembly Manufacturer?

The information brought up just below should help you maximum benefit from your small-quantity PCB assembly order.

1. Only One Manufacturer

Pick out a small-quantity PCB fabricator who can be a one-stop supplier for all of your PCB needs. The main advantage of working with a small order is basically you don’t need to coordinate with several organizations or individuals. Your order can be treated by a single point of contact.

2. Worth of Prototypes

Even when working with small orders, you must insist upon use of prototypes – although it comes at an further expense. Prototypes will help you to review your design and strengthen it, as required.

3. Low-quantity PCB Manufacturer

pcb board assembly

Manufacturing small-quantity PCB assemblies can be a task when using the services of an unsophisticated fabricator. For the reason that order quantity is low, expense of production will probably be more or less higher. Hence, any error from the PCB fabricator will generate higher losses for the consumer.

4. Standard PCB Practices

Standard tips relating to PCB producing should be implemented although working with a small-quantity PCB assembly. This can include design, fabrication, assy, and PCBA testing processes.

Working with a small-quantity PCB assembly has its own list of positive aspects. Utilising standard recommendations will let you build an order that can help you in the end.

PCB Assembly and Manufacturing – (714) 891-8224 – Free Quote

June 19, 2017 / / 0 Comments



PCB Assembly – http://tqielectronicassembly.com

At TQI, Incorporated, we manufacture printed circuit boards and we do it in an eco friendly way.

We specialize in affordable, low volume, high mix PCB assembly. We do everything from surface mount, through-hole, to rush prototype assembly. We are able to guarantee quick-turn assembly because the equipment we use is fast and accurate. We have developed long-term relationships with many clients throughout Southern California because of our excellent quality and reliability.

TQI, Inc. is proud to be fully RoHS and lead-free compliant. We have embraced this “GREEN” technology for some time, and while some of our competitors are now beginning to offer this technology as well, we are fully proficient at providing the excellent quality that our customers expect using a 100% earth-friendly process.

Give us Call Today at 714-891-8224 For A Free PCB assembly Quote, or click on over to our website and use our simple quote form. We look forward to working with you!

source

Four Suggestions for Choosing a Low-volume PCB Assembly Manufacturer

printed circuit board assembly

Working with small-run PCB assemblies has its upsides and cons. As the buyer, there are some pointers that will let you maximum benefit from your assembly. On this page, we will let you know how to capitalize on the pluses and approaches to stay away from the potential problems.

Ways to Go with a Low-volume PCB Assembly Manufacturer?

The ideas brought up down the page may help you get the most out of your small-run PCB assembly order.

1. One Provider

Pick out a small-run PCB producer who could be a one-stop provider for all of your PCB requires. The luxury of working with a small order is you don’t have to coordinate with a couple of organizations or individuals. Your order can be treated by a single point of contact.

2. Value of Prototypes

Although working with small orders, you must require use of prototypes – although it results in an added expenditure. Prototypes will allow you to check your design and improve on it, when needed.

3. Low-volume PCB Manufacturer

printed circuit board assembly

Producing small-run PCB assemblies can be quite a task when working with an unsophisticated producer. For the reason that order quantity is low, expense of production will be somewhat higher. Subsequently, any misstep from the PCB producer will be responsible for higher losses for the purchaser.

4. Standard PCB Practices

Standard recommendations involving PCB making needs to be followed despite the fact that working with a small-run PCB assembly. This consists of design, fabrication, assemblage, as well as PCBA testing procedures.

Working with a small-run PCB assembly has its own couple of benefits. With the help of standard suggestions will allow you to build an order that may help you in the long term.

ABL Circuits Etching machine in PCB process 10

June 14, 2017 / / 0 Comments



The Etching Machine used in the Printed Circuit Board process.

source

Learn About PCB Assembly Capabilities of MOKO Technology

MOKO Technology is one of the leading PCB designers and producers in China. The enterprise manufactures PCBs of diverse types, and from different materials. Here, we will focus on the capabilities of MOKO Technology.

PCB Assembly Capabilities

Subsequent are our PCB assembly capabilities, which make us one of the most advanced and leading producers of PCBs:

Ball Grid Array (BGA) Assembly

The BGA assembly is principally used when there is a need to get rid of overheating issues. This assembly has a excellent heat dissipation characteristics, and helps keep away from overheating of the circuit.

Surface Mount Technology (SMT) Assembly

In this assembly, components are mounted right on the PCBs. We have the ability of manual, and in addition automated SMT production process. Our SMT assembly capabilities comprise of BGA, small chip packages, package-on-package, and so on.

Through-Hole Assembly

In this assembly, the component leads are inserted through the pre-made holes. Later, they are soldered for protection. We can provide you with two types of Through-Hole assemblies – manual through-hole assembly and automated through-hole assembly.

Quick Turn Assemblies

We observe worldwide accepted PCB standards and guidelines. This is a value added service, making it possible for you to obtain hugely solid quick turn PCB assemblies at quick turnaround times. A lot of our users take advantage of this service which we provide.

PCB Prototypes Making

PCB prototypes help you get a better understanding of the final PCBs, or how they are going to be. With a great experience to back us up, we offer the best-in-class prototype manufacturing services to our patrons. These PCB prototypes are UL approved, and we endeavor to get them shipped to you without delay.

Low-Medium Volume Production

MOKO Technology is dedicated to provide their service, which helps you assemble low quantity PCB prototype orders. We keep ourselves updated with the most up-to-date technologies to stay up with the ever-changing wants of our patrons.

MOKO Technology is renowned for its PCB assembly capabilities which range from a simple Though Hole PCB to a standard Surface Mount (SMT) PCB assembly. We have a team of hardworking experts who have helped us deliver best-in-class products and services to our clients from a lot of industries.

General Microcircuits (GMI) – Mooresville, NC

May 26, 2017 / / 0 Comments



http://www.gmimfg.com/about-us.html General Microcircuits, Inc. is a global electronics manufacturing company. Our circuit board and integrated assemblies provide greater reliability and performance to numerous industries in diverse applications.

source

4 Suggestions for Choosing a Low-quantity PCB Assembly Manufacturer

pcb board assembly

Working with low-volume PCB assemblies has its advantages and downsides. As the buyer, there are a few pointers that can help you get the most out of your assembly. In this posting, we’re going to explain how to maximize the plus points and approaches to get around the negative aspects.

Find out how to Select a Low-quantity PCB Assembly Manufacturer?

The information brought up down the page should help you get the most out of your low-volume PCB assembly order.

1. Single Provider

Select a low-volume PCB maker who can be a one-stop service provider for all of your PCB requirements. The advantage of working with a small order is that you don’t have to coordinate with several organizations or individuals. Your order can be treated by a single point of contact.

2. Importance of Prototypes

Even when working with small orders, you must insist upon using prototypes – even though it comes at an additional cost. Prototypes will allow you to review your design and improve on it, if necessary.

3. Low-quantity PCB Manufacturer

pcb board assembly

Producing low-volume PCB assemblies can be quite a task when using an unsophisticated maker. Since the order quantity is low, cost of production is going to be to some extent higher. As a consequence, any misstep from the PCB maker will trigger increased losses for the consumer.

4. Standard PCB Practices

Standard recommendations involving PCB making needs to be adopted regardless if working with a low-volume PCB assembly. This consists of design, fabrication, assemblage, and even PCBA testing processes.

Working with a low-volume PCB assembly has its own set of pros. Applying standard best practices will assist you to build an order that might help you at the end.

e2i MasterClass Series – Manufacturing for Acceptance

May 13, 2017 / / 0 Comments



This event held 8th April 2016, was jointly organized by e2i, UWEEI and Wizlogix Pte Ltd.

It was targeted at technical professionals, e.g. engineers, managers and supervisors, etc. in the manufacturing sectors like electronics, aerospace, medical devices, etc.

The MasterClass focused on IPC and the new requirements in IPC-6012D (Qualification and Performance Specification for Rigid Printed Boards). IPC is an international standard for the electronics industry to standardize their assembly and production requirements of electronic equipment and assemblies. With more than 225 active standards in the IPC collection, there is an IPC standard associated with nearly every step of printed circuit board production and assembly for manufacturers of printed circuit boards (PCBs), electronics manufacturing services (EMS) companies, PCB and EMS suppliers, and original equipment manufacturers (OEMs). Participants can find out how their companies can benefit from using IPC standards in their manufacturing process and maintain a competitive position in the marketplace.

Please feel free to get in touch with us at www.e2i.com.sg for similar collaborations!

source

4 Guidelines to Choosing a Small-quantity PCB Assembly Manufacturer

pwb assy

Working with low-quantity PCB assemblies has its advantages and disadvantages. As the client, there are several recommendations that can help you make the most from your assembly. In the following paragraphs, we’re going to show you how to make the most of the possible benefits and approaches to go around the shortcomings.

The way to Select a Small-quantity PCB Assembly Manufacturer?

The tips brought up in this article should help you get the most from your low-quantity PCB assembly order.

1. Only One Supplier

Pick a low-quantity PCB fabricator who can be a one-stop service provider for all your PCB needs. The benefit of working with a small order is basically you don’t have to coordinate with various organizations or individuals. Your order can be treated by a single point of contact.

2. Importance of Prototypes

Even though working with small orders, you must insist on using prototypes – although it results in an increased expense. Prototypes will assist you to check your design and fix it, when necessary.

3. Small-quantity PCB Manufacturer

pwb assy

Making low-quantity PCB assemblies can be a task when employing an inexperienced fabricator. For the reason that order quantity is low, cost of production will likely be somewhat higher. As a consequence, any misstep on the part of the PCB fabricator will set off bigger losses for the purchaser.

4. Standard PCB Practices

Standard recommendations involving PCB fabrication really should be followed although working with a low-quantity PCB assembly. This can include design, fabrication, assemblage, and PCBA testing processes.

Working with a low-quantity PCB assembly has its own list of plus points. Utilising standard recommendations will let you build an order that might help you at the end.

Introduction to M-Wave International, LLC

May 6, 2017 / / 0 Comments



Joe Turek and partner Bob Duke tell M-Wave’s story and give the viewer an inside look at a leading sourcing and supply chain business, importing printed circuit boards, assemblies, box build assemblies, fabricated metals and plastics, as-well custom assembly work.

source

4 Suggestions for Choosing a Low-volume PCB Assembly Fabricator

pc board assemblies

Working with small-run PCB assemblies has its advantages and cons. As the purchaser, there are several hints that will let you obtain the most from your assembly. In this post, we will explain how to benefit from the advantages and the ways to move around the negative aspects.

Tips to Choose a Low-volume PCB Assembly Fabricator?

The information talked about down the page should help you maximum benefit out of your small-run PCB assembly order.

1. One Supplier

Opt for a small-run PCB manufacturer who can be a one-stop service provider for all your PCB needs. The great thing about working with a small order is you don’t have to coordinate with multiple organizations or individuals. Your order can be handled by a single point of contact.

2. Great need for Prototypes

Although working with small orders, you must insist upon use of prototypes – though it causes an extra expenditure. Prototypes will help you to check your design and enhance it, when required.

3. Low-volume PCB Fabricator

pc board assemblies

Manufacturing small-run PCB assemblies can be a task when working together with an inexperienced manufacturer. Since the order quantity is low, cost of production will be to some degree higher. Therefore, any error by the PCB manufacturer will result in bigger losses for the client.

4. Standard PCB Practices

Standard suggestions related to PCB producing should be taken even though working with a small-run PCB assembly. This consists of design, manufacturing, assembly, and even PCBA testing steps.

Working with a small-run PCB assembly has its own couple of benefits. Using standard best practices will assist you to build an order that might help you over the long haul.

Mycronic MY600 solder jet printing at CEM Gemini Tec Ltd

April 30, 2017 / / 0 Comments



A quick peep inside our MY600 solder jet printer, the clever technology that applies ‘solder paste’ to PCB’s in the assembly process.

Placing millions of solder paste ‘dots’ per hour, with a position resolution of 0.2 μm and acceleration of 3g (30 m/s2) !!!

Our service is suitable for UK & European customers seeking to produce SMT and complex SMT printed circuit board assemblies from 1 to 1000 units per batch.

Gemini Tec were the first UK CEM to introduce a MY600 solder jet printer, to provide its customers with fast and reliable SMT production, without the need to use stencils.

Jet printing removes the constraints of using stencils, allowing components to be placed in closer proximity and to create custom paste typography- so that a successful reflow process can be achieved for a wide range of components.

www.geminitec.co.uk to see more on our CEM services.

source

4 Tips to Picking out a Small-quantity PCB Assembly Fabricator

printed circuit board assemblies

Working with low-volume PCB assemblies has its upsides and drawbacks. As the purchaser, there are several recommendations that will let you obtain the most from your assembly. In the following paragraphs, we will show you how to take advantage of the good things and approaches to keep away from the problems.

How you can Choose a Small-quantity PCB Assembly Fabricator?

The guidelines mentioned in this article might help you make the most from your low-volume PCB assembly order.

1. One Service Provider

Go with a low-volume PCB fabricator who could be a one-stop supplier for all your PCB requires. The benefit of working with a small order is that you don’t need to coordinate with a couple of organizations or individuals. Your order can be handled by a single point of contact.

2. Significance of Prototypes

Although working with small orders, you must require use of prototypes – regardless if it results in an additional cost. Prototypes allows you to verify your design and enhance it, when necessary.

3. Small-quantity PCB Fabricator

printed circuit board assemblies

Fabricating low-volume PCB assemblies can be a task when using an low compertition fabricator. Since the order quantity is low, cost of production is going to be to some degree higher. Thereby, any mistake from the PCB fabricator will mean bigger losses for the client.

4. Standard PCB Practices

Standard guidelines relating to PCB fabrication must be taken although working with a low-volume PCB assembly. This includes design, manufacturing, assembly, and PCBA testing procedures.

Working with a low-volume PCB assembly has its own range of positive aspects. By making use of standard tips will permit you to build an order that might help you in time.

Embedded And Instrumentation Products by Interfab Electronics India Private Limited, Navi Mumbai

April 18, 2017 / / 0 Comments



[http://www.pcbassemblyindia.com] Welcome to Interfab Electronics India Private Limited, Manufacturer of Circuits Boards, PCB Assemblies & Allied Products. Incepted in 1992, at Navi Mumbai, we are an ISO 9001:2008 & SMERA certified company. We cater to Indian Subcontinent & Middle East. Super Electronics & Maxim Peripheral Pvt. Ltd. are some of our prestigious clients and we are backed by Capacious warehousing unit & Total client satisfaction. PCB Assembly, Circuit Board Design & Electronics Manufacturing Services are some of our products & services. We offer PCB Assembly & Printed Circuit Boards that are in huge demand across the global markets. Our Circuit Board Design & Developments are available at industry leading prices. Electronics Manufacturing Services & Fine Pitch Soldering offered by us are best in the industry. We also provide Micro Circuit Assembly & Embedded Design Solutions that are a class apart. Our Hybrid Micro Circuits & Ball Grid Arrays are nothing but the best solution for all your needs.

source

Four Suggestions for Finding a Low-volume PCB Assembly Maker

pwb assy

Working with small-run PCB assemblies has its upsides and cons. As the buyer, there are some tips that will let you obtain the most from your assembly. In this post, we will let you know how to take advantage of the possible benefits and ways to keep away from the negative aspects.

Easy methods to Pick out a Low-volume PCB Assembly Maker?

The ideas explained just below will help you obtain the most from your small-run PCB assembly order.

1. One Provider

Select a small-run PCB producer who could be a one-stop service provider for all of your PCB demands. The beauty with working with a small order is basically you don’t have to coordinate with a couple of organizations or individuals. Your order can be treated by a single point of contact.

2. Significance of Prototypes

Even when working with small orders, you must insist upon using prototypes – despite the fact that it comes at an additional expense. Prototypes will let you evaluate your design and strengthen it, if required.

3. Low-volume PCB Maker

pwb assy

Fabricating small-run PCB assemblies can be quite a task when using the services of an inexperienced producer. For the reason that order quantity is low, expense of production will likely be slightly higher. So, any error by the PCB producer will deliver bigger losses for the client.

4. Standard PCB Practices

Standard recommendations regarding PCB making needs to be adopted even if working with a small-run PCB assembly. This consists of design, manufacturing, assembly, and also PCBA testing steps.

Working with a small-run PCB assembly has its own range of merits. Using standard recommendations enables you to build an order that will help you in the long run.

Older posts

Recent Comments

    Information

    © 2019 PCB Prototype

    — Up ↑