PCB Prototype

Rapid PCB Prototype Service

Tag: PCB assembly (page 1 of 6)

Depaneling Printed Circuit Boards



This video presents a quick overview of PCB depaneling, then demonstrates some of the tools and methods we use for depaneling in our contract manufacturing facility, including our new UV laser.

source

4 Rules to Picking out a Small-volume PCB Assembly Fabricator

printed circuit board assembly

Working with small-volume PCB assemblies has its advantages and disadvantages. As the buyer, there are a few hints that will let you get the most from your assembly. On this page, we will explain how to utilize the plus points and the ways to get around the negative aspects.

Tips to Choose a Small-volume PCB Assembly Fabricator?

The information pointed out in this article may help you make the most out of your small-volume PCB assembly order.


1. A Single Supplier

Decide on a small-volume PCB producer who could be a one-stop supplier for all of your PCB requires. The advantage of working with a small order is basically that you don’t have to coordinate with several organizations or individuals. Your order can be treated by a single point of contact.


2. Great need of Prototypes

Although working with small orders, you must insist upon use of prototypes – though it comes at an added expense. Prototypes will help you to verify your design and enhance it, when necessary.


3. Small-volume PCB Fabricator

printed circuit board assembly

Making small-volume PCB assemblies can be a task when working with an unskilled producer. Since the order quantity is low, cost of production will probably be moderately higher. So, any error by the PCB producer will bring about increased losses for the consumer.


4. Standard PCB Practices

Standard suggestions related to PCB production really should be used even if working with a small-volume PCB assembly. This includes design, fabricating, assembly, and even PCBA testing procedures.

Working with a small-volume PCB assembly has its own group of benefits. By making use of standard recommendations allows you to build an order that may help you ultimately.

Why through-hole technology is not dead yet



Why do we still use through-hole technology to make PCB assemblies, when SMT boards are typically smaller and cheaper?

source

4 Rules to Choosing a Small-quantity PCB Assembly Producer

pwb assemblies

Working with low-volume PCB assemblies has its advantages and cons. As the client, there are several hints that can help you get the most from your assembly. In this posting, we’ll let you know how to maximize the benefits and ways to move around the negatives.

Methods to Pick a Small-quantity PCB Assembly Producer?

These tips referred to below can help you make the most from your low-volume PCB assembly order.


1. One Service Provider

Pick out a low-volume PCB maker who can be a one-stop service provider for all of your PCB requires. The main advantage of working with a small order is that you don’t need to coordinate with a couple of organizations or individuals. Your order can be handled by a single point of contact.


2. Need for Prototypes

Even if working with small orders, you must require use of prototypes – even though it results in an further expense. Prototypes will permit you to inspect your design and fix it, if necessary.


3. Small-quantity PCB Producer

pwb assemblies

Producing low-volume PCB assemblies can be quite a task when employing an inexperienced maker. For the reason that order quantity is low, cost of production is going to be gently higher. Therefore, any error on the part of the PCB maker will bring about greater losses for the customer.


4. Standard PCB Practices

Standard guidelines relating to PCB production really should be adopted despite the fact that working with a low-volume PCB assembly. This can include design, fabricating, assy, and in addition PCBA testing processes.

Working with a low-volume PCB assembly has its own group of positive aspects. Making use of standard guidelines will allow you to build an order that can help you over time.

Electronics Manufacturing – Ducommun LaBarge



Ducommun LaBarge Technologies is another preferred American supplier of contract manufacturing services you will find only at a Design-2-Part trade show at http://www.d2p.com.

Ducommun LaBarge Technologies specializes in solutions — smart, innovative and reliable answers to their customers’ needs.

Their full-service approach combines broad-based manufacturing capabilities and extensive value-added services, including professional engineering support and program management, to help our customers achieve their goals.They draw upon best-in-class processes, our continuous improvement culture and a passionate commitment to excellence to deliver quality in everything they do.

Their niche in the broad Electronics Manufacturing Services (EMS) industry is low-to-medium volume production of highly complex, high-rate-of-change electronic and electromechanical products and systems. Their full-service EMS capabilities include cable assemblies and interconnect systems, printed circuit board assemblies, higher-level electronic and electromechanical assemblies, and system integration, along with engineering and design support, and program management.

source

4 Rules to Finding a Small-run PCB Assembly Manufacturer

pwb assembly

Working with low-quantity PCB assemblies has its advantages and drawbacks. As the consumer, there are several points that will let you make the most from your assembly. In the following paragraphs, we’re going to show you how to make use of the positives and the ways to stay away from the downsides.

Tips to Select a Small-run PCB Assembly Manufacturer?

The ideas listed in this article should help you obtain the most out of your low-quantity PCB assembly order.


1. A Single Supplier

Pick out a low-quantity PCB fabricator who can be a one-stop service provider for all your PCB needs. The good thing about working with a small order is basically that you don’t have to coordinate with several organizations or individuals. Your order can be handled by a single point of contact.


2. Significance of Prototypes

Even when working with small orders, you must insist upon using prototypes – despite the fact that it causes an further expense. Prototypes will enable you to review your design and make improvements to it, if necessary.


3. Small-run PCB Manufacturer

pwb assembly

Making low-quantity PCB assemblies can be a task when employing an rookie fabricator. Since the order quantity is low, expense of production will be moderately higher. As a consequence, any error on the part of the PCB fabricator will be a catalyst for bigger losses for the buyer.


4. Standard PCB Practices

Standard best practices associated with PCB fabricating must be obeyed regardless if working with a low-quantity PCB assembly. This can include design, fabrication, assembly, and also PCBA testing steps.

Working with a low-quantity PCB assembly has its own variety of perks. With the help of standard best practices will assist you to build an order that may help you in time.

PCB Assembly for Antenna Test Card with 1.6mm Thickness and Two Layers(SMT000145)



Applicable PCB (L x W): 50 × 50 to 700 × 460mm
Minimum component: 0201
Minimum QFP pitch: 0.4mm
Minimum IC pitch: 0.30mm
Minimum BGA ball diameter: 0.40mm
Ball pitch: 1.0mm
Maximum BGA size: 74x74mm

source

4 Rules to Selecting a Small-run PCB Assembly Manufacturer

pc board assembly

Working with low-quantity PCB assemblies has its advantages and cons. As the buyer, there are some helpful tips that will allow you to make the most from your assembly. On this page, we will let you know how to make the most of the positives and the ways to get around the potential problems.

The way to Decide on a Small-run PCB Assembly Manufacturer?

The tips referred to down the page should help you maximum benefit from your low-quantity PCB assembly order.


1. Single Service Provider

Decide on a low-quantity PCB producer who can be a one-stop service provider for all of your PCB demands. The benefit of working with a small order is basically you don’t have to coordinate with several organizations or individuals. Your order can be treated by a single point of contact.


2. Worth of Prototypes

Even if working with small orders, you must insist on use of prototypes – regardless if it comes at an added expenditure. Prototypes will assist you to verify your design and fine-tune it, if required.


3. Small-run PCB Manufacturer

pc board assembly

Producing low-quantity PCB assemblies can be a task when using an low compertition producer. For the reason that order quantity is low, cost of production will probably be a little higher. So, any error on the part of the PCB producer will bring on increased losses for the consumer.


4. Standard PCB Practices

Standard recommendations concerning PCB manufacturing really should be taken even when working with a low-quantity PCB assembly. This consists of design, fabricating, assembly, as well as PCBA testing processes.

Working with a low-quantity PCB assembly has its own variety of positive factors. Utilising standard tips enables you to build an order that can help you in time.

Using Thermal Profiles in PCB soldering



By adapting the solder process to each unique board design, rather than using a handful of “one-size-fits-most” thermal profiles, contract manufacturers can deliver higher yields and lower costs to OEM buyers. See thermal profiling in action at Z-AXIS, a high-mix contract manufacturer near Rochester, NY.
Website: http://www.zaxis.net

source

4 Suggestions for Picking a Low-quantity PCB Assembly Maker

printed circuit board assemblies

Working with low-quantity PCB assemblies has its upsides and downsides. As the consumer, there are several guidelines that will assist you to get the most out of your assembly. In this post, we are going to show you how to exploit the positives and approaches to keep away from the negative aspects.

The best way to Opt for a Low-quantity PCB Assembly Maker?

The information pointed out here should help you get the most from your low-quantity PCB assembly order.


1. A Single Provider

Go with a low-quantity PCB producer who can be a one-stop provider for all your PCB needs. The benefit of working with a small order is you don’t need to coordinate with multiple organizations or individuals. Your order can be treated by a single point of contact.


2. Importance of Prototypes

Even though working with small orders, you must insist on using prototypes – though it results in an further expenditure. Prototypes allows you to verify your design and enhance it, if needed.


3. Low-quantity PCB Maker

printed circuit board assemblies

Producing low-quantity PCB assemblies could be a task when employing an unskilled producer. Given that the order quantity is low, cost of production will likely be a bit higher. So, any mistake on the part of the PCB producer will contribute to higher losses for the client.


4. Standard PCB Practices

Standard tips related to PCB producing ought to be taken despite the fact that working with a low-quantity PCB assembly. This consists of design, manufacturing, assemblage, and PCBA testing processes.

Working with a low-quantity PCB assembly has its own set of gains. Utilising standard suggestions enables you to build an order that will help you down the road.

EC Electronics Ltd – Electronic Assembly and Cable Assembly



EC Electronics provide ISO 9001:2008 approved Contract Electronic Manufacturing Services (CEMS) including PCB Assembly, Cable Assembly and Final Product Assembly to IPC standards from factories located in the UK and Romania.

source

4 Strategies to Picking out a Low-quantity PCB Assembly Manufacturer

pwb assembly

Working with low-quantity PCB assemblies has its advantages and drawbacks. As the consumer, there are a few strategies that can help you obtain the most out of your assembly. In this posting, we’ll let you know how to maximize the good things and the ways to keep clear of the downsides.

Methods to Go with a Low-quantity PCB Assembly Manufacturer?

The guidelines brought up just below should help you maximum benefit from your low-quantity PCB assembly order.


1. Single Supplier

Opt for a low-quantity PCB fabricator who could be a one-stop service provider for all of your PCB needs. The main advantage of working with a small order is you don’t have to coordinate with various organizations or individuals. Your order can be treated by a single point of contact.


2. Incredible importance of Prototypes

Even when working with small orders, you must insist on using prototypes – though it results in an extra cost. Prototypes allows you to evaluate your design and improve on it, at will.


3. Low-quantity PCB Manufacturer

pwb assembly

Fabricating low-quantity PCB assemblies can be a task when using an unsophisticated fabricator. Considering that the order quantity is low, expense of production is going to be a bit higher. For this reason, any error by the PCB fabricator will mean increased losses for the consumer.


4. Standard PCB Practices

Standard suggestions concerning PCB producing ought to be used even though working with a low-quantity PCB assembly. This consists of design, fabricating, assemblage, and even PCBA testing steps.

Working with a low-quantity PCB assembly has its own variety of merits. With the help of standard tips will assist you to build an order that can help you eventually.

Perfect PCB Assembly



Specifications:
PCB:
Base material: FR4
Layer count: four
Board thickness: 1.6mm
Copper thickness: 1oz
Surface finish: HASL
Soldermask color: green
Dimensions: 130.4 x 149.46/2up

SMT:
Capacitance: 42 pieces
Electric resistance: (0603) 45 pieces
LED lamp: six pieces
Video and interface unit: 20 pieces
Diode and triode: 30 pieces
IC: 20 pieces

Primary competitive advantages:

High-precision machine and equipment can guarantee quality X-ray, AOI, visual checking and function test confirm our delivery goods 100% past
No MOQ
Competitive price and short lead-time
Rich experience in importing and exporting

source

Four Tricks to Picking out a Small-quantity PCB Assembly Maker

pcb board assy

Working with small-run PCB assemblies has its advantages and cons. As the consumer, there are some strategies that can help you maximum benefit from your assembly. Outlined in this article, we are going to show you how to capitalize on the plus points and approaches to bypass the negatives.

The way to Choose a Small-quantity PCB Assembly Maker?

The ideas talked about below will help you obtain the most from your small-run PCB assembly order.


1. One Supplier

Choose a small-run PCB manufacturer who could be a one-stop service provider for all your PCB demands. The advantage of working with a small order is basically you don’t need to coordinate with various organizations or individuals. Your order can be handled by a single point of contact.


2. Significance of Prototypes

Although working with small orders, you must require use of prototypes – even if it comes at an added expenditure. Prototypes will enable you to inspect your design and improve on it, when required.


3. Small-quantity PCB Maker

pcb board assy

Manufacturing small-run PCB assemblies can be quite a task when using an low compertition manufacturer. Since the order quantity is low, cost of production is going to be a little bit higher. Thereby, any mistake from the PCB manufacturer will result in bigger losses for the buyer.


4. Standard PCB Practices

Standard guidelines associated with PCB fabrication really should be obeyed even when working with a small-run PCB assembly. This can include design, fabricating, assy, and also PCBA testing procedures.

Working with a small-run PCB assembly has its own set of positive factors. Taking advantage of standard tips allows you to build an order that will help you at the end.

Kitting for PCB



One price, One invoice. Zero headaches.
This comprehensive solution allows OEMs as well as contract manufacturers to reduce costs by simplifying materials management.

For more information about Kitting for PCB Assembly or other Production Services, visit www.arrow.com/productionservices

Arrow Production Services.
We make parts production ready so you don’t have to.

source

Four Tips to Picking a Small-run PCB Assembly Maker

pcb assembly

Working with small-run PCB assemblies has its benefits and drawbacks. As the customer, there are a few helpful tips that can help you make the most from your assembly. In this article, we are going to let you know how to make use of the good things and ways to stay clear of the negative aspects.

Find out how to Pick a Small-run PCB Assembly Maker?

The information brought up just below should help you make the most out of your small-run PCB assembly order.


1. Only One Provider

Go with a small-run PCB producer who could be a one-stop provider for all your PCB requires. The beauty with working with a small order is basically that you don’t need to coordinate with a couple of organizations or individuals. Your order can be handled by a single point of contact.


2. Worth of Prototypes

Even though working with small orders, you must insist upon using prototypes – even though it causes an further expense. Prototypes will permit you to evaluate your design and strengthen it, when necessary.


3. Small-run PCB Maker

pcb assembly

Producing small-run PCB assemblies could be a task when cooperating with an low compertition producer. Given that the order quantity is low, expense of production will probably be a little higher. Subsequently, any misstep on the part of the PCB producer will contribute to higher losses for the customer.


4. Standard PCB Practices

Standard best practices associated with PCB manufacturing really should be followed even though working with a small-run PCB assembly. This can include design, manufacturing, assy, and even PCBA testing processes.

Working with a small-run PCB assembly has its own range of perks. Applying standard guidelines will permit you to build an order that will help you ultimately.

FTA PCB assembly



The video is presenting the SMT production proces od FTA PCB assembly.

source

Four Guidelines to Picking a Low-volume PCB Assembly Fabricator

pc board assembly

Working with small-volume PCB assemblies has its benefits and drawbacks. As the client, there are a few helpful tips that can help you get the most out of your assembly. In this posting, we’re going to show you how to make the most of the plus points and approaches to steer clear of the down sides.

Ways to Select a Low-volume PCB Assembly Fabricator?

The ideas mentioned just below might help you maximum benefit from your small-volume PCB assembly order.


1. A Single Service Provider

Pick out a small-volume PCB manufacturer who can be a one-stop service provider for all of your PCB requires. The benefit of working with a small order is basically you don’t have to coordinate with various organizations or individuals. Your order can be treated by a single point of contact.


2. Significance of Prototypes

Even if working with small orders, you must insist upon use of prototypes – despite that it comes at an increased expenditure. Prototypes will permit you to inspect your design and enhance it, if needed.


3. Low-volume PCB Fabricator

pc board assembly

Fabricating small-volume PCB assemblies can be a task when working with an unsophisticated manufacturer. As the order quantity is low, expense of production will be to some degree higher. Consequently, any misstep from the PCB manufacturer will end in higher losses for the customer.


4. Standard PCB Practices

Standard suggestions relating to PCB fabrication must be taken even though working with a small-volume PCB assembly. This can include design, fabrication, assembly, as well as PCBA testing steps.

Working with a small-volume PCB assembly has its own list of positive factors. With the help of standard recommendations will enable you to build an order that might help you down the road.

87% Faster PCB Assembly



Advanced Assembly has developed a proprietary system for machine-placing all SMT components for pcb assembly. This allows us to assemble boards 87% faster than other shops with great accuracy and repeatability. Contact us at: www.aapcb.com or 1-800-838-5650.

source

Four Tips to Picking a Small-quantity PCB Assembly Producer

pcb assembly

Working with small-quantity PCB assemblies has its advantages and cons. As the client, there are some helpful tips that will let you maximum benefit out of your assembly. Here, we’re going to show you how to make the most of the possible benefits and approaches to steer clear of the negative aspects.

How one can Pick a Small-quantity PCB Assembly Producer?

The tips brought up here can help you get the most out of your small-quantity PCB assembly order.


1. Only One Provider

Choose a small-quantity PCB manufacturer who could be a one-stop service provider for all your PCB demands. The great thing about working with a small order is that you don’t need to coordinate with a couple of organizations or individuals. Your order can be treated by a single point of contact.


2. Importance of Prototypes

Even though working with small orders, you must insist on using prototypes – despite that it comes at an increased cost. Prototypes will enable you to review your design and enhance it, if required.


3. Small-quantity PCB Producer

pcb assembly

Fabricating small-quantity PCB assemblies could be a task when using the services of an not experienced manufacturer. Given that the order quantity is low, expense of production will be a little higher. As a result, any misstep by the PCB manufacturer will result in higher losses for the buyer.


4. Standard PCB Practices

Standard suggestions concerning PCB producing needs to be obeyed although working with a small-quantity PCB assembly. This can include design, manufacturing, assy, and PCBA testing steps.

Working with a small-quantity PCB assembly has its own range of pluses. Using standard guidelines will enable you to build an order that can help you in the end.

Older posts

© 2017 PCB Prototype

Up ↑