PCB Prototype

Rapid PCB Prototype Service

Tag: electronics (page 1 of 3)

Manufacturing at Home — Sticky Watch #1



The first of a video series exploring the possibility of small batch manufacturing of my original electronic product at home.

I will cover:
・circuit design
・PCB design
・PCB assembly (reflow soldering w/ an oven)
・3D printing
・silicone casting w/ a 3D printed mold
・final assembly
・programming

The Sticky Watch is going to be on sale soon! I’ll update when that happens.

source

Four Strategies to Picking out a Low-quantity PCB Assembly Fabricator

pwb assembly

Working with small-quantity PCB assemblies has its upsides and downsides. As the customer, there are several tips that will assist you to get the most from your assembly. Outlined in this article, we’ll let you know how to benefit from the benefits and ways to get around the drawbacks.

Ways to Opt for a Low-quantity PCB Assembly Fabricator?

The ideas pointed out just below should help you make the most from your small-quantity PCB assembly order.


1. One Supplier

Find a small-quantity PCB maker who could be a one-stop provider for all of your PCB needs. The benefit of working with a small order is that you don’t have to coordinate with a couple of organizations or individuals. Your order can be handled by a single point of contact.


2. Worth of Prototypes

Although working with small orders, you must insist upon use of prototypes – though it comes at an extra expense. Prototypes will help you to check your design and refine it, if needed.


3. Low-quantity PCB Fabricator

pwb assembly

Making small-quantity PCB assemblies can be quite a task when using an unsophisticated maker. As the order quantity is low, expense of production will be moderately higher. For that reason, any error by the PCB maker will result in larger losses for the consumer.


4. Standard PCB Practices

Standard tips relating to PCB production should be obeyed despite the fact that working with a small-quantity PCB assembly. This consists of design, fabrication, assembly, and PCBA testing procedures.

Working with a small-quantity PCB assembly has its own couple of rewards. Taking advantage of standard suggestions will let you build an order that might help you down the road.

pcb quality control



If you like what you see, or if you want to know what this video is about, you should definitely visit my blog:
www.manmademayhem.com

Thanks for watching!

source

Four Tricks to Picking a Small-quantity PCB Assembly Fabricator

pcb board assy

Working with low-volume PCB assemblies has its upsides and downsides. As the customer, there are a few guidelines that will let you get the most from your assembly. Below, we are going to let you know how to take advantage of the pluses and approaches to go around the negative aspects.

Ways to Choose a Small-quantity PCB Assembly Fabricator?

The guidelines brought up here might help you make the most out of your low-volume PCB assembly order.


1. Single Service Provider

Pick a low-volume PCB producer who can be a one-stop provider for all your PCB requires. The main benefit of working with a small order is you don’t have to coordinate with multiple organizations or individuals. Your order can be treated by a single point of contact.


2. Great need of Prototypes

Even if working with small orders, you must insist on use of prototypes – even though it comes at an additional expenditure. Prototypes enables you to review your design and strengthen it, as you desire.


3. Small-quantity PCB Fabricator

pcb board assy

Manufacturing low-volume PCB assemblies could be a task when using the services of an unsophisticated producer. Considering that the order quantity is low, expense of production will be a bit higher. Accordingly, any mistake from the PCB producer will produce greater losses for the customer.


4. Standard PCB Practices

Standard tips involving PCB fabrication needs to be implemented even though working with a low-volume PCB assembly. This can include design, fabrication, assembly, and PCBA testing procedures.

Working with a low-volume PCB assembly has its own variety of merits. Utilizing standard guidelines enables you to build an order that might help you over time.

Automatic Optical Inspection Process – Circuit Boards



EBW Electronics SMD lines feature automated optical inspection machines that scan printed circuit board assemblies to rapidly identify the slightest deviation to standards. One more reason why EBWE is the fastest growing electronics company in Michigan.

source

4 Ideas to Picking out a Low-quantity PCB Assembly Maker

pcb board assembly

Working with small-run PCB assemblies has its benefits and drawbacks. As the buyer, there are several suggestions that can help you get the most out of your assembly. Below, we are going to let you know how to take advantage of the pros and ways to keep clear of the disadvantages.

How one can Choose a Low-quantity PCB Assembly Maker?

The information talked about here might help you obtain the most out of your small-run PCB assembly order.


1. One Service Provider

Go with a small-run PCB maker who could be a one-stop service provider for all of your PCB demands. The main benefit of working with a small order is basically you don’t need to coordinate with multiple organizations or individuals. Your order can be handled by a single point of contact.


2. Great need of Prototypes

Even if working with small orders, you must insist on using prototypes – even if it results in an further expenditure. Prototypes will let you look into your design and make improvements to it, if required.


3. Low-quantity PCB Maker

pcb board assembly

Fabricating small-run PCB assemblies can be quite a task when using an not experienced maker. As the order quantity is low, expense of production will probably be somewhat higher. Hence, any mistake from the PCB maker will trigger increased losses for the customer.


4. Standard PCB Practices

Standard tips associated with PCB fabricating must be obeyed even though working with a small-run PCB assembly. This includes design, fabrication, assemblage, and in addition PCBA testing processes.

Working with a small-run PCB assembly has its own range of rewards. With standard recommendations will permit you to build an order that might help you ultimately.

PCB Assembly for Antenna Test Card with 1.6mm Thickness and Two Layers(SMT000145)



Applicable PCB (L x W): 50 × 50 to 700 × 460mm
Minimum component: 0201
Minimum QFP pitch: 0.4mm
Minimum IC pitch: 0.30mm
Minimum BGA ball diameter: 0.40mm
Ball pitch: 1.0mm
Maximum BGA size: 74x74mm

source

4 Rules to Selecting a Small-run PCB Assembly Manufacturer

pc board assembly

Working with low-quantity PCB assemblies has its advantages and cons. As the buyer, there are some helpful tips that will allow you to make the most from your assembly. On this page, we will let you know how to make the most of the positives and the ways to get around the potential problems.

The way to Decide on a Small-run PCB Assembly Manufacturer?

The tips referred to down the page should help you maximum benefit from your low-quantity PCB assembly order.


1. Single Service Provider

Decide on a low-quantity PCB producer who can be a one-stop service provider for all of your PCB demands. The benefit of working with a small order is basically you don’t have to coordinate with several organizations or individuals. Your order can be treated by a single point of contact.


2. Worth of Prototypes

Even if working with small orders, you must insist on use of prototypes – regardless if it comes at an added expenditure. Prototypes will assist you to verify your design and fine-tune it, if required.


3. Small-run PCB Manufacturer

pc board assembly

Producing low-quantity PCB assemblies can be a task when using an low compertition producer. For the reason that order quantity is low, cost of production will probably be a little higher. So, any error on the part of the PCB producer will bring on increased losses for the consumer.


4. Standard PCB Practices

Standard recommendations concerning PCB manufacturing really should be taken even when working with a low-quantity PCB assembly. This consists of design, fabricating, assembly, as well as PCBA testing processes.

Working with a low-quantity PCB assembly has its own variety of positive factors. Utilising standard tips enables you to build an order that can help you in time.

EC Electronics Ltd – Electronic Assembly and Cable Assembly



EC Electronics provide ISO 9001:2008 approved Contract Electronic Manufacturing Services (CEMS) including PCB Assembly, Cable Assembly and Final Product Assembly to IPC standards from factories located in the UK and Romania.

source

4 Strategies to Picking out a Low-quantity PCB Assembly Manufacturer

pwb assembly

Working with low-quantity PCB assemblies has its advantages and drawbacks. As the consumer, there are a few strategies that can help you obtain the most out of your assembly. In this posting, we’ll let you know how to maximize the good things and the ways to keep clear of the downsides.

Methods to Go with a Low-quantity PCB Assembly Manufacturer?

The guidelines brought up just below should help you maximum benefit from your low-quantity PCB assembly order.


1. Single Supplier

Opt for a low-quantity PCB fabricator who could be a one-stop service provider for all of your PCB needs. The main advantage of working with a small order is you don’t have to coordinate with various organizations or individuals. Your order can be treated by a single point of contact.


2. Incredible importance of Prototypes

Even when working with small orders, you must insist on using prototypes – though it results in an extra cost. Prototypes allows you to evaluate your design and improve on it, at will.


3. Low-quantity PCB Manufacturer

pwb assembly

Fabricating low-quantity PCB assemblies can be a task when using an unsophisticated fabricator. Considering that the order quantity is low, expense of production is going to be a bit higher. For this reason, any error by the PCB fabricator will mean increased losses for the consumer.


4. Standard PCB Practices

Standard suggestions concerning PCB producing ought to be used even though working with a low-quantity PCB assembly. This consists of design, fabricating, assemblage, and even PCBA testing steps.

Working with a low-quantity PCB assembly has its own variety of merits. With the help of standard tips will assist you to build an order that can help you eventually.

PCB Assembly @ Micro-Tech Electronics LLC



Custom Prototype and PCB Assembly see as www.micro-techelectronics.com

source

Four Tips to Picking a Small-quantity PCB Assembly Fabricator

printed circuit board assy

Working with small-volume PCB assemblies has its advantages and downsides. As the buyer, there are a few guidelines that will help you obtain the most out of your assembly. In this post, we’ll let you know how to make use of the possible benefits and approaches to move around the down sides.

The way to Pick out a Small-quantity PCB Assembly Fabricator?

The information mentioned here may help you maximum benefit out of your small-volume PCB assembly order.


1. One Supplier

Pick out a small-volume PCB fabricator who could be a one-stop service provider for all of your PCB requirements. The advantage of working with a small order is you don’t have to coordinate with multiple organizations or individuals. Your order can be treated by a single point of contact.


2. Importance of Prototypes

Although working with small orders, you must insist on use of prototypes – though it results in an added expenditure. Prototypes will assist you to check your design and make improvements to it, if required.


3. Small-quantity PCB Fabricator

printed circuit board assy

Manufacturing small-volume PCB assemblies can be quite a task when hiring an not experienced fabricator. Because the order quantity is low, expense of production is going to be moderately higher. And so, any error from the PCB fabricator will give rise to bigger losses for the consumer.


4. Standard PCB Practices

Standard best practices related to PCB manufacturing needs to be taken even if working with a small-volume PCB assembly. This can include design, fabricating, assembly, and additionally PCBA testing procedures.

Working with a small-volume PCB assembly has its own couple of positive factors. Taking advantage of standard suggestions will enable you to build an order that may help you over time.

Wave soldering machine technology



Wave soldering is a large-scale soldering process by which electronic components are soldered to a printed circuit board (PCB) to form an electronic assembly.

The name is derived from the use of waves of molten solder to attach metal components to the PCB. The process uses a tank to hold a quantity of molten solder; the components are inserted into or placed on the PCB and the loaded PCB is passed across a pumped wave or waterfall of solder. The solder wets the exposed metallic areas of the board (those not protected with solder mask, a protective coating that prevents the solder from bridging between connections), creating a reliable mechanical and electrical connection. The process is much faster than manual soldering of components.

The following are characteristics of the wave soldering process:

The solder connection is very reliable and also a clean connection
The process is automated
The process reuses the flux and solder that is left over
It does require inspection, some touch ups, and also testing
The productivity and efficiency is increased

source

4 Tricks to Selecting a Small-volume PCB Assembly Manufacturer

pcb board assy

Working with small-run PCB assemblies has its benefits and drawbacks. As the consumer, there are a few pointers that will allow you to get the most from your assembly. In this article, we’ll show you how to make use of the pluses and ways to get around the negative aspects.

Methods to Choose a Small-volume PCB Assembly Manufacturer?

The tips brought up below should help you make the most out of your small-run PCB assembly order.


1. One Service Provider

Find a small-run PCB fabricator who can be a one-stop service provider for all of your PCB demands. The main benefit of working with a small order is that you don’t have to coordinate with various organizations or individuals. Your order can be handled by a single point of contact.


2. Worth of Prototypes

Even if working with small orders, you must require use of prototypes – regardless if it comes at an added cost. Prototypes will enable you to check your design and improve on it, as needed.


3. Small-volume PCB Manufacturer

pcb board assy

Manufacturing small-run PCB assemblies can be a task when using the services of an unsophisticated fabricator. Since the order quantity is low, expense of production will likely be slightly higher. As a result, any error from the PCB fabricator will trigger bigger losses for the client.


4. Standard PCB Practices

Standard guidelines regarding PCB manufacturing must be used although working with a small-run PCB assembly. This includes design, manufacturing, assembly, and PCBA testing processes.

Working with a small-run PCB assembly has its own list of gains. With standard suggestions will allow you to build an order that can help you in the future.

Introduction to TRI PCB Assembly inspection Solutions



A brief introduction to the complete lineup of TRI’s PCB Assembly testing and inspection solutions focused on bringing maximum value to our customers.

source

4 Rules to Picking a Small-volume PCB Assembly Manufacturer

pcb assy

Working with small-run PCB assemblies has its benefits and disadvantages. As the buyer, there are a few tips that will allow you to make the most out of your assembly. Outlined in this article, we are going to explain how to capitalize on the benefits and the ways to stay clear of the negative aspects.

The best way to Decide on a Small-volume PCB Assembly Manufacturer?

The guidelines listed here should help you obtain the most from your small-run PCB assembly order.


1. Just One Manufacturer

Select a small-run PCB maker who could be a one-stop service provider for all your PCB needs. The main advantage of working with a small order is basically that you don’t need to coordinate with a couple of organizations or individuals. Your order can be handled by a single point of contact.


2. Value of Prototypes

Even when working with small orders, you must insist upon using prototypes – despite the fact that it generates an added expenditure. Prototypes will allow you to check your design and make improvements to it, at will.


3. Small-volume PCB Manufacturer

pcb assy

Manufacturing small-run PCB assemblies can be quite a task when collaborating with an inexperienced maker. Because the order quantity is low, cost of production will likely be to some degree higher. For this reason, any error on the part of the PCB maker will result in higher losses for the purchaser.


4. Standard PCB Practices

Standard tips relating to PCB production must be taken even though working with a small-run PCB assembly. This can include design, fabrication, assy, and even PCBA testing steps.

Working with a small-run PCB assembly has its own group of benefits. Making use of standard best practices allows you to build an order that may help you in the future.

SMT PCB Assembly Service – G&B Electronics



Capabilities
The capability to operate the most efficient systems and processes is assured by our experience and resources across:

SMT PCB Assembly – prototypes to volume assembly
BGA and µBGA Assembly – prototypes to volume assembly
Mixed Technology PCB Assembly ­ prototypes to volume assembly
Axial, Radial and PTH Assembly – prototypes to medium volume assembly
Placement speeds ranging from 3,500 to 27,000 components per hour
RoHS and Non RoHS processes
Smallest component 01005’s
Smallest pitch 30 microns
Tallest component 15mm
Largest component / connectors 45 x 100mm
Placement of all fine-pitch QFP, BGA, µBGA, CSP packages
PCB size capability from 50 x 50mm to 460 x 440mm
Six SMT pick and place lines
Cleaning Facilities
50 manual assembly stations
Conformal Coating
Labelling / traceability / serial number control

source

Four Guidelines to Selecting a Low-quantity PCB Assembly Fabricator

pcb assemblies

Working with low-volume PCB assemblies has its upsides and drawbacks. As the consumer, there are a few helpful tips that will let you obtain the most from your assembly. On this page, we’ll let you know how to take advantage of the pluses and the ways to steer clear of the negative aspects.

How to Pick out a Low-quantity PCB Assembly Fabricator?

The tips explained down the page might help you obtain the most out of your low-volume PCB assembly order.


1. Only One Supplier

Pick out a low-volume PCB maker who can be a one-stop provider for all your PCB requires. The main advantage of working with a small order is that you don’t have to coordinate with various organizations or individuals. Your order can be handled by a single point of contact.


2. Incredible importance of Prototypes

Although working with small orders, you must require use of prototypes – even though it generates an added cost. Prototypes will assist you to evaluate your design and reinforce it, when required.


3. Low-quantity PCB Fabricator

pcb assemblies

Producing low-volume PCB assemblies can be quite a task when using the services of an not experienced maker. Because the order quantity is low, expense of production will be gently higher. For that reason, any error by the PCB maker will cause increased losses for the buyer.


4. Standard PCB Practices

Standard guidelines related to PCB producing must be used even if working with a low-volume PCB assembly. This consists of design, manufacturing, assembly, and additionally PCBA testing procedures.

Working with a low-volume PCB assembly has its own group of benefits. With the help of standard best practices will help you to build an order that might help you over time.

Cyclone PCB Factory DIY CNC Router Mill Machine



CNC machine built using parts from 3D printer, salvaged laser printer parts, RAMPS 1.4

source

Know About PCB Assembly Capabilities of MOKOTech

MOKOTech is amongst the main PCB designers and makers in China. The firm produces Printed Circuits of assorted types, and from varied materials. In this post, we’ll discuss about the capabilities of MOKOTech.

Printed Circuit Assembly Capabilities

Below are our Printed Circuit assembly capabilities, which make us among the most innovative and leading producers of Printed Circuits:

Ball Grid Array (BGA) Assembly

The BGA assembly is mainly used when there is a demand to get rid of overheating issues. This assembly has a decent heat dissipation characteristics, and helps avert getting too hot of the circuit.

Surface Mount Technology (SMT) Assembly

In this assembly, components are mounted entirely on the Printed Circuits. We have the capability of manual, and additionally automatic SMT production process. Our SMT assembly capabilities include BGA, small chip packages, package-on-package, and so on.

Through-Hole Assembly

In this assembly, the component leads are inserted through the pre-made holes. Later, they are soldered for protection. We can provide you with two types of Through-Hole assemblies – manual through-hole assembly and automated through-hole assembly.

Quick Turn Assemblies

We view internationally accepted Printed Circuit standards and guidelines. This is a value added service, which allows you to receive very reliable fast turn PCB assemblies at quick turnaround times. Many of our shoppers take advantage of this service which we provide.

Printed Circuit Prototypes Manufacture

Printed Circuit prototypes assist you in getting a better understanding of the final PCBs, or how they are going to be. With a great experience to back us up, we provide the best-in-class prototype manufacturing services to our patrons. These PCB prototypes are UL approved, and we strive to get them delivered to you without delay.

Low-Mid Volume Production

MOKOTech is devoted to provide their service, which helps you assemble low quantity PCB prototype orders. We maintain ourselves updated with the most up-to-date technologies to stay abreast of the ever changing demands of our purchasers.

MOKOTech is well-known for its PCB assembly capabilities which range from a elementary Though Hole PCB to a standard Surface Mount (SMT) PCB assembly. We have a group of hardworking professionals who have helped us deliver top of the line services and products to our patrons from a broad range of industries.

Older posts

© 2017 PCB Prototype

Up ↑