PCB Prototype

Rapid PCB Prototype Service

Tag: desktop

ACEPC AK1 Mini PC review and giveaway &11.11GB



WIN WIN WIN LIKE SHARE AND COMMENT TO BE IN WITH A CHANCE OF WINNING AN ACEPC AK1 MINI PC

this is my review for the ACEPC AK1 Mini PC from gearbest which is available from here:
https://www.gearbest.com/mini-pc/pp_694602.html?lkid=11701194

WIN WIN WIN COMPETITION DETAILS BELOW PLEASE SEE COMMENTS SECTION

Couponcode: GBAK1 for $149.99 Endtime: 11.30 50units only

www.gearbest.com

To get mini pc deals please follow this link:
https://www.gearbest.com/promotion-coupon-deal-special-1633.html?lkid=11701265

Couponcode: GBAK1 for $149.99 Endtime: 11.30 50units only

source

Specs of ACEPC AK1 Micro Computer

Device Model ACEPC AK1
Processor Intel Celeron J3455 4-core @ 1.5 / 2.3 GHz
GPU Intel HD Graphics 500 @ 250 MHz / 750 MHz
OS Windows 10
Chipset Intel Apollo Lake
BIOS AMI BIOS
RAM memory 4 GB LPDDR3 1600 MHz Dual Channel
In-built Storage 32 GB eMMC Flash Samsung
1x mSATA (internal – optional)
1x 2,5″ SATA3 disk (optional)
WiFi Si, Intel Dual Band AC 3165
(2x internal antenna)
Ethernet Realtek Gigabit Ethernet
Bluetooth version 4
Audio Intel Broxton
Ports 2x USB 3.0
1x USB 3.0 Type-C
2x USB 2.0
DC-IN
3.5mm headphone Audio jack in/out
HDMI 1.4 / 4K@30fps
TF card reader
Kensington lock
Others Guide book
Adaptor 12V 2.5A (30W)
VESA support
Weight: 2.2 lb.
Size: 5 x 5 x 2.1 / 1.4 “

Raspberry Pi tutorial: Use SSH to in order to remote control your Raspberry Pi.



SSH protocol can be very useful if we want to remote control our Raspberry Pi. I am using a Raspberry Pi A+ board in this video but you can use any Raspberry Pi board you like.

So far, when we wanted to use our Raspberry Pi, we were using a keyboard, a mouse and a monitor via the HDMI port, or a touch screen like this one. The second method is easier and portable. I have prepared a detailed tutorial on that touch screen display a few weeks ago, you can check it out. But if we want an even easier solution, we can use our desktop computer, or laptop, or even our cell phone to remotely control the Raspberry Pi. Check this out, I am running a terminal on my Android cell phone and I can execute commands on my Raspberry Pi. I will now run a simple program I wrote in order to light up this LED. Cool, isn’t it? But very useful as well! Let’s see how we can achieve that!

——————–
WHERE TO BUY
——————–

1. Raspberry Pi 2: http://goo.gl/H87sNN

2. 5” TFT Display: http://goo.gl/i5LJIM

3. Small Wi-Fi Dongle: http://goo.gl/jvq0MS

4. LED: http://bit.ly/375LEDS

5. Wires: http://bit.ly/WiresArduino

6. Resistor: http://bit.ly/ResistorsB

7. Breadboard mini: http://bit.ly/MiniBreadboard

Full disclosure: All of the links above are affiliate links. I get a small percentage of each sale they generate. Thank you for your support!

Secure Shell or SSH is a cryptographic network protocol to allow remote login to other network services to operate securely over an unsecured network. Using SSH we can remotely login to a system and execute commands. In this case, the system we want to login to, is the Raspberry Pi. SSH protocol allow us to gain access to the command line of the Raspberry Pi from another computer, but only on the same network. Let’s now see how to setup our systems in order to achieve that.

SHH is built into the Raspbian distribution that we are using, so all we have to do is to setup the network connection for our Raspberry Pi board. I am using a Raspberry Pi A+ today, but you can use any Raspberry Pi board you like. I replaced the big WiFi dongle I was using so far, with this tiny and cheap one I got from Gearbest.com. It is working fine and it is plug and play, there is no need to install anything at all. It makes things more compact. You can find a link for it in the description of the video. All we have to do now, is to boot our Raspberry Pi once and set up the WiFi password. Next we have to run the command sudo ifconfig in order to get the IP address of our Raspberry Pi. Note this address as we are going to need it. In my case the address is this 192.168.1.44. Most routers, assign a different IP address each time we connect our Raspberry Pi board to the network. So, we have to make the IP address of the Raspberry Pi a static one. In order to achieve that I logged in my routers settings page, and defined that I want my Raspberry Pi board to have a specific IP address, 192.168.1.44. Check your Router settings and see how to set your Raspberry Pi to have a static IP.

——————–
Physics Experiments Puzzle Game
——————–

You can download my latest Android Game which is called Incredible Physics Experiments here:

? http://bit.ly/IncredibleExperiments

——————–
MORE PROJECTS
——————–
Arduino Datalogger: https://www.youtube.com/watch?v=oei3Y6tOhVI
Arduino Weather Station Project: https://www.youtube.com/watch?v=9jN-3DtS1RI
Arduino Nokia 5110 LCD Display: https://www.youtube.com/watch?v=aDwrMeu4k9Y
Arduino OLED display tutorial: https://www.youtube.com/watch?v=A9EwJ7M7OsI
DIY Arduino: https://www.youtube.com/watch?v=npc3uzEVvc0

——————–
ABOUT EDUC8S.TV
——————–
Educ8s.tv is a Youtube channel and website which is dedicated in developing high quality videos about DIY hardware and software projects. In this channel we develop projects with Arduino, Raspberry Pi, we build robots and simple electronic circuits. Check out our website as well for more information: http://www.educ8s.tv

——————–
SUBSCRIBE ON YOUTUBE
——————–

Never miss a video: https://www.youtube.com/subscription_center?add_user=educ8s

source

Raspberry Pi Substitutes: How Come They Are a Greater Buy

Raspberry Pi is not the baddest tiny PC on the globe, and it’s what its challengers are endeavoring to notify the remainder of the world. Now and then, a fresh mini computer is introduced in the marketplace promising to be the largest one to take down Raspberry Pi. In fact, you will find a new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and charges $30.

The Raspberry Pi is released with 4 variations as time passes. These comprise of Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most current which is Pi 3 Model B.

Pi 3 was established to ensure that Raspberry Pi could please anybody with a low-cost PC for developer work. It has improved CPU with the Cortex A53, Hackaday stated, and runs on 1.2 GHz. Priced at $35, the Raspberry Pi is the most widely used of all.

The Raspberry Pi, nevertheless, is not the single single board computer(SBC) for homebrewed projects. There are a number more in the market which will cost less, and then some that can do more than Raspberry Pi for a little extra, ZD Net expressed.

For starters, there’s the Omega 2, that features a modular nature allowing software engineers to put in Bluetooth or Gps system rapidly. It has inbuilt Wi-Fi and flash memory space; the OS is Linux distribution established on the OpenWrt program. The Omega 2 costs you $5 and can even operate on FreeBSD Operating system, and that is why it is really excellent for students.

The BBC Micro:bit costs you $16 and is excellent for students for their learning and prototyping projects. A 32-bit ARM Cortex processor energizes it from inside and it is unique from the competition for its 5×5 LED matrix. This benefit offers you 25 separately programmable red-colored LEDs for basic output.

Similarly, there is the BeagleBone Black, which costs you $55 and like the Raspberry Pi, is another community-supported platform both for amateurs and designers. It truly does work speedy; it can actually boost Linux in just 10 seconds and can develop in below 5 min’s. It is actually motivated by AM335x 1GHz ARM Cortex-A8 combined with 512MB DDR3 RAM.

One more is the NanoPi M1 Plus, which has been referred to as as the new Raspberry Pi killer. Priced at $30, it promises to have a sturdier design and layout and was competent to merge notable elements similar to Wi-Fi and Wireless BT. Additionally, it has got an IR receiver, microphone, 8GB storage area, and power and reset control buttons.

Nevertheless, the perfect element of NanoPi M1 Plus is its capacity to run Ubuntu-Mate, Ubuntu-Core, and even Debian, Beta News described. It is an excellent option for company users, coders, hobbyists, and students.

nanopi m1 plus specs

FriendlyElec introduces Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi substitute

Learn more on official website: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

You can find a new Raspberry Pi rival that is quite budget friendly. In reality, some people may consider it as a Pi substitute. The $30 FriendlyElec NanoPi M1 Plus has an arguably top-notch design and layout, along with essential built-in features like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Raspberry Pi – How to SSH – Remote view your Pi…



In this tutorial I show you how to SSH into your Pi in Windows. I explain what SSH is, the dangers, how to use it on your local network, how to find your Pi’s IP address, explain how to use it outside of your network (port forwarding) and how to view your ENTIRE Pi’s desktop! I hope you enjoy it!

Logo designs/ ideas:
theraspberrypiguy@gmail.com

Code and download links:

To find out your Pi’s IP address: ifconfig (line starting inet!)

PuTTY download: http://putty.en.softonic.com/

Xming (X11 server) download: http://sourceforge.net/projects/xming/

Please tell me if any of the links are incorrect or if any of my tutorials content is false!
theraspberrypiguy@gmail.com

Happy Piing!

The Raspberry Pi Guy
Matt

NOTE: The competition is now over! Thank you David Ryan!

source

Raspberry Pi Alternatives: Reasons Why They’re a Greater Buy

Raspberry Pi isn’t the baddest micro PC on the globe, and it’s what its challengers are trying to explain to the rest of the world. Now and then, a new mini computer is released on the market promising to be the largest one to take down Raspberry Pi. Indeed, you will find a new Raspberry Pi killer known as NanoPi M1 Plus, which is Ubuntu-Linux ready and is priced at $30.

The Raspberry Pi is introduced with 4 versions in recent years. They include Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most recent which is Pi 3 Model B.

Pi 3 was made to double check that Raspberry Pi will suit anybody with an economical PC for computer programming. It has upgraded Processor chip with the Cortex A53, Hackaday declared, and runs on 1.2 GHz. At $35, the Raspberry Pi is the most popular of all.

The Raspberry Pi, having said that, isn’t the only single board computer(SBC) for homebrewed projects. There are lots more available on the market which is less expensive, and then some that can do more than Raspberry Pi for a little more, ZD Net noted.

To begin with, there’s the Omega 2, sporting a modular nature enabling developers to introduce Wireless bluetooth or Global positioning systems quickly. It has in-built Wi-Fi and flash storage space; the Operating platform is Linux distro on top of the OpenWrt system. The Omega 2 is priced at $5 and can easily run on FreeBSD Operating system, which is the reason it’s an excellent option for high school students.

The BBC Micro:bit is priced at $16 and is best for learners for their studying and prototyping projects. A 32-bit ARM Cortex processor chip powers it internally and it sticks out from the others because of the 5×5 LED matrix. This feature presents 25 singularly programmable red-colored Led lights for basic output.

And also, there is the BeagleBone Black, which is priced at $55 and much like the Raspberry Pi, is one more community-supported platform both for lovers and designers. It truly does work speedy; it can actually boost Linux in merely 10 seconds and can develop in under Five min’s. It’s motorized by AM335x 1GHz ARM Cortex-A8 combined with 512MB DDR3 RAM.

Another one is the NanoPi M1 Plus, which was titled as the new Raspberry Pi killer. At $30, it promises to have a tougher layout and design and was competent to merge useful attributes including Wi-Fi and Bluetooth. Also, it offers an Infrared receiver, microphone, 8GB storage, and power and reset keys.

Nonetheless, the most excellent element of NanoPi M1 Plus is its capacity to run Ubuntu-Mate, Ubuntu-Core, and Debian, Beta News expressed. It is ideal for venture users, developers, lovers, and learners.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Get more information on official webpage: http://friendlyarm.com/index.php?route=product/product&product_id=176

There is a new Raspberry Pi opponent that is quite competitively priced. For that matter, some individuals may regard it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an arguably top-quality layout and design, along with key included features such as Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

© 2018 PCB Prototype

Up ↑