PCB Prototype

Rapid PCB Prototype Service

Category: Raspberry Pi (page 1 of 11)

An Easy Raspberry Pi Music Player Tutorial



In this video I will be putting together a Raspberry Pi music player that you can control from any device that has browser within your local network.

Full Tutorial: http://pimylifeup.com/raspberry-pi-music-player/

For this project I use a prebuilt software image known as the Pi MusicBox. This is a software package that allows you to connect to several different services such as Spotify, google music and more. It also lets you play local music files so if you have an offline library you can still play that.

This is a headless music player so you won’t be able to control the player on the Pi itself. You will need to use a different device such as your phone, computer or anything else that has a browser to be able to control it.

You won’t need any extra equipment apart from the standard parts you need for the Raspberry Pi. However, it has been recommended that you invest in a USB audio card or a sound card for the Pi so that you can get better audio. This is entirely optional and I found the audio through the HDMI just fine.

Since the Raspberry Pi music server uses a prebuilt image you can’t just easily install this onto an existing operating system. However, once you have installed the software you can add or do extra stuff on the Pi as it still contains everything you get with normal Raspbian.

It is very important you have your network setup for this project because you won’t be able to control it via the Pi directly. With the Ethernet just simply plug it in. The WiFi you will need to do a few extra steps to getting it working correctly.

There are a few security issues with this particular software package that I detail over at the website linked above. If you have concerns, then be sure to head over to the website and read up on it.

Hopefully you have been able to setup this Raspberry Pi music player correctly and without any issue. If you do run into any troubles, have feedback or anything else then be sure to drop a comment below or over at pimylifeup.com.

source

Raspberry Pi Alternate Options: Precisely Why They’re a Better Buy

Raspberry Pi isn’t the baddest small PC on the globe, and it is what its challengers are endeavoring to convey to the rest of the world. Now and then, a fresh mini computer is launched on the market promising to be the biggest one to beat Raspberry Pi. The fact is, you will find a new Raspberry Pi killer referred to as NanoPi M1 Plus, which is Ubuntu-Linux ready and priced at $30.

The Raspberry Pi is released with four versions as time has passed. They include Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most current which is Pi 3 Model B.

Pi 3 was designed to make perfectly sure that Raspberry Pi can meet up with anybody with a low-priced PC for coding. It’s up-graded Processor chip with the Cortex A53, Hackaday published, and runs on 1.2 GHz. At $35, the Raspberry Pi is the trendiest of all.

The Raspberry Pi, on the other hand, isn’t the merely single board computer(SBC) for homebrewed projects. There are a number more sold in the market that are cheaper, and then some that can do more than Raspberry Pi for a bit more, ZD Net announced.

To start with, there is the Omega 2, including a modular nature granting programmers to introduce Wireless bluetooth or Global positioning system unit quickly. It has integrated Wi-Fi and flash storage; the OS is Linux distribution founded on the OpenWrt program. The Omega 2 is priced at $5 and can likewise operate on FreeBSD OS, which explains why it is worthwhile for school students.

The BBC Micro:bit is priced at $16 and is ideal for learners for their training and prototyping projects. A 32-bit ARM Cortex processor chip energizes it from the inside and it is unique from the remaining as a result of 5×5 LED matrix. This attribute presents 25 singularly programmable red LEDs for basic output.

In addition, there is the BeagleBone Black, which is priced at $55 and exactly like the Raspberry Pi, is one more community-supported platform both for amateurs and programmers. It truly does work rapid; it could boost Linux in under Ten secs and can develop in less than Five min’s. It’s powered by AM335x 1GHz ARM Cortex-A8 coupled with 512MB DDR3 RAM.

Someone else is the NanoPi M1 Plus, that has been known as as the new Raspberry Pi killer. At $30, it promises to have a better quality layout and design and was able to merge very important benefits for example , Wi-Fi and Bluetooth. It also carries an IR receiver, mic, 8GB storage area, and power and reset control buttons.

Yet, the finest element of NanoPi M1 Plus is its power to run Ubuntu-Mate, Ubuntu-Core, as well as Debian, Beta News reported. It’s ideal for firm users, programmers, amateurs, and learners.

nanopi m1 plus specs

FriendlyElec roll-outs Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Get more information on official site: http://friendlyarm.com/index.php?route=product/product&product_id=176

You will find there’s new Raspberry Pi opponent that is quite economical. In truth, some folks may see it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an arguably outstanding layout and design, along with valuable incorporated features including Wi-Fi and Bluetooth.

https://www.betanews.com/2017/03/02/friendlyelec-linux-debian-ubuntu-nanopi-m1-plus-raspberry-pi/

1. Raspberry pi 3 connection with laptop without a monitor and a router, tutorial



Hey guys!
It is my first video about raspberry pi. I decided to make it because when I received my raspberry I did’t have opportunity to connect a monitor or keyboard because I study in different country and I have just laptop with my.

I included few part to this video, it is describing how to download raspbian, how to write it to sd card and how to use DHCP of windows, so you don’t need to have a router, and last it is how to connect to raspberry pi by ssh.

Please leave comment below if you have a suggestion or have found a mistake. Thanks, hope it is useful for someone =)

source

Raspberry Pi Alternatives: Precisely Why They’re a Greater Buy

Raspberry Pi isn’t the baddest micro computer in the market, and it is what its competitors are wanting to convey to the rest of the world. Now and then, a fresh mini computer is introduced in the marketplace promising to be the largest one to overcome Raspberry Pi. To put it accurately, there exists a new Raspberry Pi killer named NanoPi M1 Plus, which is Ubuntu-Linux ready and is priced at $30.

The Raspberry Pi is released with 4 versions in recent years. These include Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most up-to-date which is Pi 3 Model B.

Pi 3 was made to make sure that Raspberry Pi can delight a person with a lower priced computer for programming. It’s up-graded Processor with the Cortex A53, Hackaday declared, and runs on 1.2 GHz. At $35, the Raspberry Pi is the most well-known of all.

The Raspberry Pi, nonetheless, isn’t the solely single board computer(SBC) for homebrewed projects. There are plenty more available that cost less, and then some that can do more than Raspberry Pi for a little bit more, ZD Net published.

For a start, there is the Omega 2, which includes a modular nature which allows programmers to incorporate Wireless bluetooth or Navigation systems rapidly. It has in-built Wi-Fi and flash memory space; the Operating-system is Linux distribution founded on the OpenWrt system. The Omega 2 is priced at $5 and can even run on FreeBSD Operating-system, which is why it’s suitable for learners.

The BBC Micro:bit is priced at $16 and is good for learners for their learning and prototyping projects. A 32-bit ARM Cortex processor drives it from inside and it is different from the remainder due to its 5×5 LED matrix. This function offers 25 separately programmable red-colored Led lights for basic output.

There is also the BeagleBone Black, which is priced at $55 and similar to the Raspberry Pi, is in addition a community-supported platform both for hobbyists and designers. It truely does work speedy; it can actually boost Linux in lower than 10 seconds and can develop in below 5 minutes. It’s driven by AM335x 1GHz ARM Cortex-A8 coupled with 512MB DDR3 RAM.

One more is the NanoPi M1 Plus, that has been dubbed as the most current Raspberry Pi killer. At $30, it promises to have a more robust design and layout and was capable to combine very important attributes for instance Wi-Fi and Wireless bluetooth. In addition, it contains an Infrared receiver, microphone, 8GB memory, and power and reset control buttons.

However, the most useful element of NanoPi M1 Plus is its capability to run Ubuntu-Mate, Ubuntu-Core, and also Debian, Beta News suggested. It is of great help for venture users, developers, hobbyists, and learners.

nanopi m1 plus specs

FriendlyElec introduces Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi substitute

Know more on official webpage: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

You will find a new Raspberry Pi contender that is quite economical. To put it accurately, some individuals might see it as a Pi substitute. The $30 FriendlyElec NanoPi M1 Plus has an arguably superior design and layout, as well as crucial incorporated features just like Wi-Fi and Bluetooth.

https://www.betanews.com/2017/03/02/friendlyelec-linux-debian-ubuntu-nanopi-m1-plus-raspberry-pi/

Setup BitCoin ASIC Mining On Raspberry Pi (Raspbian)



How to Set up BFGMiner on the Raspbian on the Raspberry Pi.
Use your USB ASICs with the Low power Raspberry Pi, to get maximum efficiency for power to BTC.

The Rasbian OS does not contain a lot of support for this sort of thing so you need to follow this guide:

Step 0 :
To set-up find out the IP address then SSH into it using PuTTY:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html

Step 1: Update to latest Version
sudo aptitude update
sudo aptitude upgrade

Step 2: Install Librarys
sudo apt-get install libusb-1.0-0-dev libcurl4-gnutls-dev libjansson-dev uthash-dev libncurses5-dev libudev-dev autoconf automake libtool pkg-config screen

Step 3: Get BFGMiner
git clone git://github.com/luke-jr/bfgminer
(use: ls to find where it is)
cd bfgminer

Step 4 Configure the Software for Compiling
./autogen.sh
./configure
make
(optional: then use sudo make install to have it system wide. Not advised)

Step 5:Run BFGMiner
(stay in the bfgminer software then use below command changing caps to your settings.)

screen -S Mining ./bfgminer -o stratum+tcp://POOL.com:PORT -u USER -p PASSWORD

Step 6: Using Screen
then to do something else hit
Ctrl A D

and to get back to it use
screen -ls to see your running screens
then screen -r 0000 to get back to your screen

However If you are using Nanofury/Ice Fury you need HIDAPI which is VERY hit and miss and more likely miss than hit at the moment.
git clone git://github.com/signal11/hidapi
cd hidapi
./bootstrap
./configure
make
sudo make install
sudo ldconfig
However this still might not work so check out video tomorrow on Minepeon:

My pool: http://full.sc/1tmZveB
Donations/tips:
BTC: 14uUbzJSi2t5MGgYH72PdTonD22V8drBVN
Doge: DTHbar4BRRmxx2YBjkYj23epzJG7Z2g5cx
Google+ : https://plus.google.com/+Tingawinga5
Facebook: http://www.facebook.com/tingawinga5
Folding@home team: 123464
Twitter: http://www.twitter.com/tingawinga
SubReddit: http://www.reddit.com/r/TingaWinga/
Website: http://www.tingawinga.co.uk Buy Stuff Here: http://bit.ly/2oRV8i9

source

Raspberry Pi Alternate Options: The Reason They Are a Greater Buy

Raspberry Pi is not the baddest mini computer on the planet, and it is what its contenders are endeavoring to inform the remaining of the world. Now and then, a new mini computer is launched in the marketplace promising to be the largest one to defeat Raspberry Pi. In actual fact, you will find there’s new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and costs $30.

The Raspberry Pi is presented with four models throughout the years. Examples of these are Raspberry Pi Model B+, Pi 2 Model B, Zero, and the newest which is Pi 3 Model B.

Pi 3 was made to confirm that Raspberry Pi has the potential to fulfill a person with a lower priced computer for computer programming. It’s upgraded CPU with the Cortex A53, Hackaday explained, and runs on 1.2 GHz. Costing $35, the Raspberry Pi is the hottest-selling of all.

The Raspberry Pi, on the other hand, is not the sole single board computer(SBC) for homebrewed projects. There are a variety more out there that entails lower cost, and then some that can do more than Raspberry Pi for a little more, ZD Net reported.

For starters, there’s the Omega 2, sporting a modular nature enabling developers to incorporate Bluetooth or Gps unit without problems. It has internal Wi-Fi and flash storage; the Operating system is Linux distro founded upon the OpenWrt system. The Omega 2 is priced at $5 and can also operate on FreeBSD Operating system, and that is why it is really perfect for college students.

The BBC Micro:bit is priced at $16 and is ideal school students for their studying and prototyping projects. A 32-bit ARM Cortex processor energizes it from inside and it sticks out from the competition because of the 5×5 LED matrix. This feature provides 25 singularly programmable red Led lights for basic output.

There is also the BeagleBone Black, which is priced at $55 and like the Raspberry Pi, is additionally a community-supported platform both for enthusiasts and coders. It truly does work fast; it can certainly boost Linux in under Ten seconds and can develop in under 5 min’s. It is motorized by AM335x 1GHz ARM Cortex-A8 coupled with 512MB DDR3 RAM.

Another one is the NanoPi M1 Plus, that has been known as as the new Raspberry Pi killer. Priced at $30, it promises to have a better quality design and layout and was capable to add vital benefits similar to Wi-Fi and Bluetooth. In addition, it features an Infrared receiver, microphone, 8GB storage area, and power and reset buttons.

However, the perfect attribute of NanoPi M1 Plus is its power to run Ubuntu-Mate, Ubuntu-Core, and in addition Debian, Beta News described. It is excellent for business users, programmers, amateurs, and school students.

nanopi m1 plus specs

FriendlyElec rolls out Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi substitute

Get more information on official webpage: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

You will find there’s new Raspberry Pi rival that is quite affordable. In actual fact, a number of people might consider it as a Pi substitute. The $30 FriendlyElec NanoPi M1 Plus has an arguably remarkable design and layout, as well as critical built-in features such as Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

How to Set Up a Raspberry Pi FTP Server Using Apache



In this video I show you how to install Apache, a free HTTP server client, on your Raspberry Pi running Raspbian. The Pi is powerful enough to store and host …

source

Raspberry Pi Alternate Options: Why They Are a Better Buy

Raspberry Pi isn’t the baddest tiny PC throughout the world, and it’s what its challengers are wanting to explain to the rest of the world. Now and then, a fresh mini computer is released on the market promising to be the largest one to defeat Raspberry Pi. Believe it or not, there exists a new Raspberry Pi killer known as NanoPi M1 Plus, which is Ubuntu-Linux ready and costs you $30.

The Raspberry Pi is launched with four variations as time has passed. Included in these are Raspberry Pi Model B+, Pi 2 Model B, Zero, and the latest which is Pi 3 Model B.

Pi 3 was created to be sure that Raspberry Pi could delight anyone with an economical PC for developer work. It’s improved Processor chip with the Cortex A53, Hackaday revealed, and runs on 1.2 GHz. At $35, the Raspberry Pi is the most desired of all.

The Raspberry Pi, nonetheless, isn’t the only single board computer(SBC) for homebrewed projects. There are tons more out there which are less costly, and then some that can do more than Raspberry Pi for a bit more, ZD Net explained.

For a start, there is the Omega 2, sporting a modular nature enabling developers to add on Wireless bluetooth or Gps system with no trouble. It has in-built Wi-Fi and flash storage area; the Operating-system is Linux distribution established on the OpenWrt program. The Omega 2 charges $5 and is also able to run on FreeBSD Operating-system, which is why it really is great for college students.

The BBC Micro:bit charges $16 and is suitable for learners for their studying and prototyping projects. A 32-bit ARM Cortex processor chip powers it internally and it is different from the competition because of the 5×5 LED matrix. This attribute provides 25 singularly programmable red Led lights for basic output.

There is also the BeagleBone Black, which charges $55 and like the Raspberry Pi, is additionally a community-supported platform both for enthusiasts and developers. It truely does work rapidly; it is able to boost Linux in under 10-seconds and can develop in below 5 minutes. It’s pushed by AM335x 1GHz ARM Cortex-A8 and 512MB DDR3 RAM.

A fresh one is the NanoPi M1 Plus, which was named as the new Raspberry Pi killer. At $30, it promises to have a better quality layout and design and was able to use necessary capabilities similar to Wi-Fi and Wireless BT. Additionally, it presents an Infrared receiver, microphone, 8GB memory space, and power and reset buttons.

Yet, the best element of NanoPi M1 Plus is its power to run Ubuntu-Mate, Ubuntu-Core, and even Debian, Beta News noted. It is designed for enterprise users, coders, collectors, and learners.

nanopi m1 plus specs

FriendlyElec roll-outs Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Get more information on official web site: http://friendlyarm.com/index.php?route=product/product&product_id=176

You will find there’s new Raspberry Pi rival that is quite economical. In actual fact, a number of people might see it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an certainly exceptional layout and design, and additionally key incorporated features such as Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Raspberry PI 2, GPIO, SPI, I2C and OneWire Setup



In this post of the Raspberry PI series we look at what is required to setup a Raspberry PI 2 after the initial Raspbian setup. It assumes you have completed “sudo atp-get update” and “sudo apt-get upgrade” or that you install is up to date and you can SSH into the PI from a console using TeraTerm or Putty (Or your own favourite SSH) app.

The process shows how to install and test all the various libraries we will need for the up coming tutorials on adding devices to the PI2 GPIO connector including I2C chips like ADCs and DACs, SPI devices like the 16bit port expander “23S17” from microchip and many others.

Just so you don’t feel like its all install and no practical, In this video I also show how to connect and use a simple one wire device, the DS18B21 from Maxim : http://datasheets.maximintegrated.com/en/ds/DS1821.pdf

One of the libraries we will install is wiringpi by Gordon Henderson : http://wiringpi.com/ a great set of libraries with support for an ever growing set of devices and allowing you to program in C but with the feel that you may be used to with an Arduino. More on this in future episodes

Another source of inspiration is the Adafruit tutorial series, they have done a great job creating these and you should go have a look: Learn @ Adafruit and for the temp sensor, adafruits raspberry-pi lesson 11 ds18b20 temperature sensing

At time of posting I have already filmed the next instalment where I will show you how to control an ADC (ADS1115 – quad 16bit from TI), and two DACs (DAC8574 – quad 16bit, DAC8571 – Single 16bit) it will be posted as soon as I’m done editing it

This preparation will flow into my Power supply project down the road as an example of how to integrate a reasonably powerful controller to the Analogue power system.

An added component in the design will also be a barrier I2C device to provide isolation between the PI and the Power side. Stay tuned

source

Raspberry Pi Alternate Options: How Come They Are a Greater Buy

Raspberry Pi is not the baddest tiny PC in the market, and it is what its contenders are attempting to notify the remainder of the world. Now and then, a fresh mini computer is launched out there promising to be the biggest one to take down Raspberry Pi. To put it accurately, there’s a new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and costs $30.

The Raspberry Pi is introduced with 4 variations as time goes by. These consist of Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most up-to-date which is Pi 3 Model B.

Pi 3 is built to make sure that Raspberry Pi could gratify anybody with a low-cost PC for developer work. It has replaced CPU with the Cortex A53, Hackaday suggested, and runs on 1.2 GHz. At $35, the Raspberry Pi is the most widely used of all.

The Raspberry Pi, on the other hand, is not the single single board computer(SBC) for homebrewed projects. There are a number more for sale that entails lower cost, and then some that can do more than Raspberry Pi for a little more, ZD Net declared.

To start with, there is the Omega 2, that includes a modular nature granting developers to attach Wireless bluetooth or Global positioning system unit comfortably. It has in-built Wi-Fi and flash storage space; the Operating-system is Linux distro based upon the OpenWrt system. The Omega 2 will cost you $5 and can easily operate on FreeBSD Operating system, which describes why it really is best for students.

The BBC Micro:bit will cost you $16 and is excellent for school students for their exercising and prototyping projects. A 32-bit ARM Cortex cpu energizes it from inside and it excels from the competition because of its 5×5 LED matrix. This function gives you 25 separately programmable red Led lights for basic output.

There is also the BeagleBone Black, which will cost you $55 and like the Raspberry Pi, is additionally a community-supported platform both for enthusiasts and builders. It truely does work quick; it can boost Linux in lower than 10 seconds and can develop in less than 5 minutes. It’s powered by AM335x 1GHz ARM Cortex-A8 and 512MB DDR3 RAM.

Someone else is the NanoPi M1 Plus, which was named as the most recent Raspberry Pi killer. Priced at $30, it promises to have a more robust design and layout and was competent to combine key options like Wi-Fi and Wireless BT. In addition, it consists of an Infrared receiver, mic, 8GB memory space, and power and reset control buttons.

Yet, the best feature of NanoPi M1 Plus is its power to run Ubuntu-Mate, Ubuntu-Core, as well as Debian, Beta News suggested. It’s excellent for business users, coders, fans, and school students.

nanopi m1 plus specs

FriendlyElec roll-outs Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi substitute

Learn more on official webpage: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

There is a new Raspberry Pi rival that is quite economical. Believe it or not, some folks might regard it as a Pi substitute. The $30 FriendlyElec NanoPi M1 Plus has an arguably remarkable design and layout, plus important incorporated features just like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Using Raspberry Pi without external monitor and keyboard



Guys, please go here: http://www.hellointernetofthings.com/using-raspberry-pi-without-external-monitor-keyboard/
For the whole step by step detail procedure. I described every step with detailed description. Hope this will solve every issue.

For those who have issue with setting up and configure the PC internet how you will use with Raspberry Pi, this post(http://www.hellointernetofthings.com/using-raspberry-pi-without-external-monitor-keyboard/) will solve the issue for them.

Using Raspberry Pi without external monitor and keyboard and sharing the internet connection of the computer from which you are connected.

-I can see many people asking how to use internet. Please do not connect the raspberry pi to the router. you can do that but this setup in the video is not for that. Connect your raspberry pi directly to the LAN port of your PC/laptop and do as i did in the video. (i used my PC as a router for raspberry pi to get internet).

-also changing the ip is for using the pc as router for your raspberry pi. they should be in the same class of ip. as your raspberry is using your pc/pc-ethernet as a router and your pc is connected to internet; your raspberry should get the internet.

source

Raspberry Pi Alternate Options: Precisely Why They Are a Greater Buy

Raspberry Pi is not the baddest tiny computer on the planet, and it’s what its rivals are trying to inform the remaining of the world. Now and then, a fresh mini computer is introduced on the market promising to be the biggest one to take down Raspberry Pi. For that matter, you will find a new Raspberry Pi killer named NanoPi M1 Plus, which is Ubuntu-Linux ready and priced at $30.

The Raspberry Pi is released with 4 variations in the past. These comprise of Raspberry Pi Model B+, Pi 2 Model B, Zero, and the newest which is Pi 3 Model B.

Pi 3 was designed to ensure that Raspberry Pi is able to please anybody with a low-priced computer for computer programming. It has upgraded Processor chip with the Cortex A53, Hackaday revealed, and runs on 1.2 GHz. Charging $35, the Raspberry Pi is the most well known of all.

The Raspberry Pi, still, is not the solely single board computer(SBC) for homebrewed projects. There are tons more in the marketplace which is less expensive, and then some that can do more than Raspberry Pi for a little extra, ZD Net published.

To start, there is the Omega 2, that has a modular nature helping developers to introduce Bluetooth or Global positioning system effortlessly. It has integrated Wi-Fi and flash storage space; the OS is Linux distro established on the OpenWrt system. The Omega 2 is priced at $5 and can also operate on FreeBSD Operating system, this is why it is appropriate for students.

The BBC Micro:bit is priced at $16 and is ideal learners for their studying and prototyping projects. A 32-bit ARM Cortex central processor powers it from the inside and it is unique from the competition thanks to its 5×5 LED matrix. This benefit gives 25 separately programmable red-colored Led lights for basic output.

There is also the BeagleBone Black, which is priced at $55 and just like the Raspberry Pi, is also a community-supported platform both for lovers and programmers. The system functions rapidly; it could boost Linux in lower than 10 seconds and can develop in less than 5 minutes. It is fueled by AM335x 1GHz ARM Cortex-A8 and 512MB DDR3 RAM.

A fresh one is the NanoPi M1 Plus, which was known as as the new Raspberry Pi killer. At $30, it promises to have a better made design and layout and was able to use necessary benefits for instance Wi-Fi and Wireless bluetooth. Additionally, it has got an Infrared receiver, mic, 8GB memory space, and power and reset keys.

Nonetheless, the most beneficial feature of NanoPi M1 Plus is its ability to run Ubuntu-Mate, Ubuntu-Core, as well as Debian, Beta News explained. It is well suited for firm users, programmers, fans, and learners.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi substitute

Learn more on official web site: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

There exists a new Raspberry Pi contender that is quite affordable. In truth, some people might see it as a Pi substitute. The $30 FriendlyElec NanoPi M1 Plus has an certainly top-quality design and layout, and additionally critical integrated features just like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Raspberry Pi 3 Retro Pie DIY Home Arcade Tutorial



Raspberry Pi 3 Retro Pie DIY Home Arcade Tutorial
I show you how to assemble all the bits to make your very kick ass Arcade system for under £30!
You are likely to have the monitor lying around, or you can plug it into your regular living room TV. I prefer to use native style controllers and find the SNES style work well for both NES, SNES and Neo Geo games.

New Stealth Arcade Video here upgrading from Rpi 1 to an Rpi 3: https://youtu.be/TH7OaMIfmUw

This was used to make this amazing home-brew retro console and media centre:

https://www.youtube.com/watch?v=5JWag…

Dont forget to check out the earlier Rpi model B stealth arcade in a monitor: https://youtu.be/bNoLV4iuGl8

There is a whole bunch of people selling the bits on Amazon and their associated accessories. I have a ready-made link for you:

Raspberry Pi:

http://amzn.to/1QtT9cb

XBOX Controllers:

http://amzn.to/1R0oLte

SNES style USB controllers:

http://amzn.to/1QtTbAI

HDMI Adaptor Cables:

http://amzn.to/1QtTfjX

PSU:

http://amzn.to/1QtTyeA

Micro SD Card:

http://amzn.to/1QtTziy

For the main software I used RetroPie, you can download this from here:

http://blog.petrockblock.com/2015/08/…

As for Roms, you will need to search these out for yourself. The legalities are a bit iffy, but generally if you already own the physical game then you should have no problem.

Also many of the MSDOS and Amiga images are abandonware so have a look on abandonware sites such as Home of the Underdogs: http://www.homeoftheunderdogs.net/

Have fun!

Please subscribe for more, or keep in touch in your preferred way:

Twitter: https://twitter.com/BackofficeShow @BackofficeShow
Facebook: https://www.facebook.com/AndrewsBackO…
Patreon: https://www.http://patreon.com/BackofficeShow
pinterest: https://uk.pinterest.com/backofficeshow
tumblr: https//thebackofficeshow.tu­mblr.com/

.
Want an easier way to manage your channel? Click here for the best channel manager you can get! Best of all, you can get going for free! https://www.tubebuddy.com/TheBackoffi… Don’t be a stranger, please click here for updates: http://www.backofficeshow.com/youtube/

Now you can buy me a coffee! Please support me on Patreon at http://patreon.com/BackofficeShow

Thanks you lovely people!

source

Raspberry Pi Substitutes: The Reason They’re a Better Buy

Raspberry Pi is not the baddest small PC throughout the world, and it’s what its opponents are trying to notify the rest of the world. Now and then, a new mini computer is launched in the marketplace promising to be the biggest one to take down Raspberry Pi. If truth be told, you will find a new Raspberry Pi killer named NanoPi M1 Plus, which is Ubuntu-Linux ready and priced at $30.

The Raspberry Pi is released with 4 versions through the years. Examples of these are Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most current which is Pi 3 Model B.

Pi 3 was designed to make perfectly sure that Raspberry Pi could please anyone with an affordable PC for coding. It’s replaced Processor with the Cortex A53, Hackaday expressed, and runs on 1.2 GHz. At $35, the Raspberry Pi is the most desired of all.

The Raspberry Pi, having said that, is not the merely single board computer(SBC) for homebrewed projects. There are plenty more on the market that cost less, and then some that can do more than Raspberry Pi for a bit more, ZD Net described.

For a start, there is the Omega 2, including a modular nature allowing for developers to add Wireless bluetooth or Global positioning system unit readily. It has internal Wi-Fi and flash storage space; the Operating-system is Linux distro stemmed from the OpenWrt system. The Omega 2 will cost you $5 and can easily run on FreeBSD Operating-system, that is why it truly is great for college students.

The BBC Micro:bit will cost you $16 and is best for students for their learning and prototyping projects. A 32-bit ARM Cortex central processor powers it from the inside and it stands apart from the rest due to its 5×5 LED matrix. This function presents 25 separately programmable red Led lights for basic output.

In addition, there is the BeagleBone Black, which will cost you $55 and just like the Raspberry Pi, is additionally a community-supported platform both for hobbyists and designers. It works speedy; it can boost Linux in lower than 10-seconds and can develop in under 5 min’s. It’s motivated by AM335x 1GHz ARM Cortex-A8 and 512MB DDR3 RAM.

A fresh one is the NanoPi M1 Plus, which was called as the newest Raspberry Pi killer. At $30, it promises to have a tougher design and layout and was competent to add valuable capabilities including Wi-Fi and Bluetooth. Further, it carries an Infrared receiver, mic, 8GB memory, and power and reset keys.

But, the most beneficial element of NanoPi M1 Plus is its capability to run Ubuntu-Mate, Ubuntu-Core, and even Debian, Beta News noted. It’s ideal for venture users, programmers, collectors, and students.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Uncover more on official site: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

There exists a new Raspberry Pi challenger that is quite cost-effective. For that matter, some people might view it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an arguably outstanding design and layout, plus essential included features like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Raspberry Pi – Using Arduino – Episode 1 – An introduction…



In this tutorial we will be looking at the Arduino and how to use it with the Raspberry Pi… I will show you how to install all the necessary software in order to program the Arduino, I will tell you all you need to know about Arduino and where you should get one etc. By the end of this episode you will be able to understand an entire C++ Arduino program that makes a LED flash on and off. I hope you enjoy this tutorial and also hope that you will subscribe, like and watch my other videos: http://www.youtube.com/user/TheRaspberryPiGuy?feature=mhee

CODE AND INFO:

My Arduino is the: Arduino Mega 2560 which I purchased from eBay for £17. I would recommend getting the UNO as this is the Arduino flagship model…

Here is the forum post with all the commands: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=37&t=28747

Please email me and comment on my videos if you have any problems or would like some support with your Raspberry Pi project: theraspberrypiguy@gmail.com

The Raspberry Pi Guy

WHAT ARE YOU DOIN’? Why haven’t you subscribed yet?

source

Raspberry Pi Alternate Options: The Reason They Are a Greater Buy

Raspberry Pi isn’t the baddest tiny computer in the world, and it’s what its challengers are trying to convey to the remainder of the world. Now and then, a new mini computer is released out there promising to be the biggest one to defeat Raspberry Pi. For that matter, there exists a new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and costs $30.

The Raspberry Pi is released with 4 variants over the years. They include Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most recently released which is Pi 3 Model B.

Pi 3 is built to make certain that Raspberry Pi can delight anybody with a low priced computer for developer work. It has upgraded CPU with the Cortex A53, Hackaday declared, and runs on 1.2 GHz. Costing $35, the Raspberry Pi is the most fashionable of all.

The Raspberry Pi, even so, isn’t the only single board computer(SBC) for homebrewed projects. There are lots more for sale that come in less expensive, and then some that can do more than Raspberry Pi for a little bit more, ZD Net expressed.

To start, there’s the Omega 2, that features a modular nature letting programmers to include Bluetooth or GPS rapidly. It has internal Wi-Fi and flash storage; the Operating platform is Linux distribution based on the OpenWrt system. The Omega 2 costs $5 and can even operate on FreeBSD Operating-system, which is why it really is designed for learners.

The BBC Micro:bit costs $16 and is ideal school students for their learning and prototyping projects. A 32-bit ARM Cortex central processor drives it from the inside and it shines from the remainder for the 5×5 LED matrix. This element presents 25 separately programmable red-colored Led lights for basic output.

Moreover, there is the BeagleBone Black, which costs $55 and much like the Raspberry Pi, is additionally a community-supported platform both for fans and builders. It works quickly; it can actually boost Linux in only 10 seconds and can develop in less than 5 min’s. It is motivated by AM335x 1GHz ARM Cortex-A8 as well as 512MB DDR3 RAM.

Another one is the NanoPi M1 Plus, which has been dubbed as the latest Raspberry Pi killer. At $30, it promises to have a more robust design and layout and was capable to combine crucial features for example , Wi-Fi and Bluetooth. Further, it has got an Infrared receiver, microphone, 8GB storage, and power and reset keys.

Though, the finest feature of NanoPi M1 Plus is its capacity to run Ubuntu-Mate, Ubuntu-Core, and also Debian, Beta News reported. It is excellent for company users, developers, enthusiasts, and school students.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi alternative

Uncover more on official web site: http://friendlyarm.com/index.php?route=product/product&product_id=176

You can find a new Raspberry Pi contender that is quite competitively priced. In actual fact, some folks may view it as a Pi alternative. The $30 FriendlyElec NanoPi M1 Plus has an certainly top-notch design and layout, and additionally valuable in-built features similar to Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Raspberry Pi 3 Tutorial: Connecting Breadboard and LEDs



This video demonstrates how to attach a breadboard to a Raspberry Pi 3 with optional touchscreen. LED lights are then installed on the breadboard and turned on/off via the WiringPi software.

Hardware tips:
* Disconnect power to your Raspberry Pi before attempting this tutorial.
* Do not connect LEDs directly to the breadboard rows that are already in use by the T cobbler. Use the lower rows that are free.
* The positive pin (longer leg) of the LED connects in the same numbered row (different letter) as the jumper wire.
* The negative pin (shorter leg) of the LED connects in the same numbered row (different letter) as one end of the resistor.
* The other end of the resistor connects in the negative column on the edge of the breadboard (any row).
* The other end of the jumper wire connects in the same row (any lettered column) as the desired GPIO pin as indicated on the T cobbler.

Example pins:
Connect LED 1 positive leg to breadboard row 30, column E
Connect LED 1 negative leg to breadboard row 29, column E
Connect LED 2 positive leg to breadboard row 28, column E
Connect LED 2 negative leg to breadboard row 27, column E
Connect LED 3 positive leg to breadboard row 26, column E
Connect LED 3 negative leg to breadboard row 25, column E
Connect Resistor 1 leg 1 to breadboard row 29, column C
Connect Resistor 1 leg 2 to breadboard 3V negative column, any unused row
Connect Resistor 2 leg 1 to breadboard row 27, column C
Connect Resistor 2 leg 2 to breadboard 3V negative column, any unused row
Connect Resistor 3 leg 1 to breadboard row 25, column C
Connect Resistor 3 leg 2 to breadboard 3V negative column, any unused row
Connect Jumper 1 end 1 to breadboard row 30, column A
Connect Jumper 1 end 2 to the breadboard row that aligns with GPIO 17 (pin 11) on the T cobbler, column C
Connect Jumper 2 end 1 to breadboard row 28, column A
Connect Jumper 1 end 2 to the breadboard row that aligns with GPIO 27 (pin 13) on the T cobbler, column C
Connect Jumper 3 end 1 to breadboard row 26, column A
Connect Jumper 1 end 2 to the breadboard row that aligns with GPIO 22 (pin 15) on the T cobbler, column C

To install WiringPi, follow the instructions at http://wiringpi.com/download-and-install/

To change the orientation of the Raspberry Pi Touchscreen and to flip it upside down, add the following line to /boot/config.txt:

lcd_rotate=2

The commands to control the LEDs are as follows.

To set the pins to Output mode:
gpio -g mode 17 out
gpio -g mode 27 out
gpio -g mode 22 out

To turn the LEDs on:
gpio -g write 17 1
gpio -g write 27 1
gpio -g write 22 1

To turn the LEDs off:
gpio -g write 17 0
gpio -g write 27 0
gpio -g write 22 0

Note: the ending 2 in the “gpio -g write 22 2” command in the video is a typo.

Check http://blog.brianguy.com for additional notes.
Follow @brianguy_cloud on Twitter.

source

Raspberry Pi Alternate Options: Why They’re a Better Buy

Raspberry Pi is not the baddest small PC throughout the world, and it’s what its contenders are seeking to tell the remaining of the world. Now and then, a new mini computer is released on the market promising to be the largest one to overcome Raspberry Pi. The reality is, there’s a new Raspberry Pi killer known as NanoPi M1 Plus, which is Ubuntu-Linux ready and is priced at $30.

The Raspberry Pi is launched with four variations in recent years. These comprise of Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most current which is Pi 3 Model B.

Pi 3 was established to make sure Raspberry Pi has the ability to meet anybody with a low cost PC for programming. It’s improved CPU with the Cortex A53, Hackaday mentioned, and runs on 1.2 GHz. At $35, the Raspberry Pi is the most sought-after of all.

The Raspberry Pi, but bear in mind, is not the single single board computer(SBC) for homebrewed projects. There are many more out there which are less expensive, and then some that can do more than Raspberry Pi for a bit more, ZD Net noted.

Firstly, there’s the Omega 2, which has a modular nature empowering software engineers to add Bluetooth or Gps unit without problems. It has constructed in Wi-Fi and flash storage space; the Operating-system is Linux distro on top of the OpenWrt system. The Omega 2 is priced at $5 and can even run on FreeBSD Operating-system, which explains why it is good for college students.

The BBC Micro:bit is priced at $16 and is suitable for learners for their learning and prototyping projects. A 32-bit ARM Cortex processor drives it from inside and it is different from the remainder as a result of 5×5 LED matrix. This benefit offers 25 independently programmable red-colored LEDs for basic output.

In addition, there is the BeagleBone Black, which is priced at $55 and just like the Raspberry Pi, is yet another community-supported platform both for hobbyists and programmers. It really works super fast; it could boost Linux in under 10-seconds and can develop in within 5 min’s. It’s driven by AM335x 1GHz ARM Cortex-A8 coupled with 512MB DDR3 RAM.

Someone else is the NanoPi M1 Plus, that has been known as as the new Raspberry Pi killer. At $30, it promises to have a more robust layout and design and was capable to put in beneficial attributes like Wi-Fi and Wireless BT. Further, it includes an IR receiver, mic, 8GB storage space, and power and reset switches.

Nevertheless, the best attribute of NanoPi M1 Plus is its power to run Ubuntu-Mate, Ubuntu-Core, and also Debian, Beta News mentioned. It is made for firm users, developers, collectors, and learners.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Find out more on official site: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

There’s a new Raspberry Pi rival that is quite economical. Actually, a lot of people might see it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an certainly superior layout and design, and valuable incorporated features including Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Raspberry Pi GPIO Tutorial: The Basics Explained



This Raspberry Pi GIO tutorial takes you through a lot of the basics of the GPIO pins and what you can do with them

Full Guide: http://pimylifeup.com/raspberry-pi-gpio/

As you may know the general purpose input and output pins (GPIO) are used to communicate with other circuity. This includes thing such as extension boars, circuits, and much more. You can do some pretty cool stuff with them.

You should beware that playing around with the Raspberry Pi GPIO pins wrongly can result in destroying the Pi. The best way to avoid this is to double check that whatever you’re plugging in will be supported by the Pi.

In the little small circuit, I use in the Raspberry Pi GPIO tutorial I use the following equipment.

• 1 100-ohm resistor
• 1x Red LED
• GPIO Breakout Kit Assembled
• Breadboard
• Breadboard Wire/Jumper Cables

There is quite a bit of terminology around these pins but be sure to not let this turn you off from using them. We go into the terminology a little in the video but if you need more information be sure to look up some of the terms I used.

In the video we display a Raspberry Pi GPIO pinout diagram. If you would like this to use for future reference, then be sure head over the guide. You can find the link above.

We will be looking at doing many projects using the GPIO pins in the future. This includes stuff such as home automation! This is something I know a lot of people have been asking about.

I hope you have enjoyed this video on the Raspberry Pi GPIO pins. If you have any questions, feedback or anything else feel free to drop us a comment below. Also be sure to subscribe so you can stay up to date with all our latest Raspberry Pi projects, guides and much more.

source

Raspberry Pi Substitutes: The Reason Why They Are a Better Buy

Raspberry Pi isn’t the baddest mini computer all over the world, and it is what its opponents are endeavoring to explain to the remainder of the world. Now and then, a fresh mini computer is launched out there promising to be the largest one to overcome Raspberry Pi. The fact is, there’s a new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and is priced at $30.

The Raspberry Pi is introduced with four models in recent years. These include Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most recently released which is Pi 3 Model B.

Pi 3 was established to make certain that Raspberry Pi is able to please a person with a better value computer for developer work. It’s upgraded Processor chip with the Cortex A53, Hackaday announced, and runs on 1.2 GHz. At $35, the Raspberry Pi is the best-selling of all.

The Raspberry Pi, even so, isn’t the merely single board computer(SBC) for homebrewed projects. There are a variety more sold in the market that is less expensive, and then some that can do more than Raspberry Pi for a little extra, ZD Net announced.

For a start, there’s the Omega 2, that features a modular nature granting computer programmers to add in Wireless bluetooth or Gps system effortlessly. It has integrated Wi-Fi and flash memory; the Operating platform is Linux distro based on the OpenWrt system. The Omega 2 is priced at $5 and can even operate on FreeBSD Operating system, and that is why it really is perfect for college students.

The BBC Micro:bit is priced at $16 and is excellent for school students for their studying and prototyping projects. A 32-bit ARM Cortex cpu energizes it from the inside and it is different from the others simply because of its 5×5 LED matrix. This feature delivers 25 singularly programmable red LEDs for basic output.

In addition, there is the BeagleBone Black, which is priced at $55 and similar to the Raspberry Pi, is another community-supported platform both for lovers and designers. The system functions rapid; it does boost Linux in only 10-seconds and can develop in below 5 minutes. It’s fueled by AM335x 1GHz ARM Cortex-A8 as well as 512MB DDR3 RAM.

A fresh one is the NanoPi M1 Plus, that has been named as the new Raspberry Pi killer. At $30, it promises to have a better made design and layout and was competent to assimilate vital features similar to Wi-Fi and Bluetooth. What’s more, it offers an Infrared receiver, microphone, 8GB memory, and power and reset keys.

Yet, the perfect attribute of NanoPi M1 Plus is its capacity to run Ubuntu-Mate, Ubuntu-Core, and also Debian, Beta News revealed. It is appropriate for firm users, developers, lovers, and school students.

nanopi m1 plus specs

FriendlyElec launches Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Know more on official site: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

There is a new Raspberry Pi competitor that is quite economical. To put it accurately, some individuals may see it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an certainly superb design and layout, plus critical built-in features just like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Older posts

© 2017 PCB Prototype

Up ↑