PCB Prototype

Rapid PCB Prototype Service

Month: July 2017 (page 2 of 5)

Kitting for PCB



One price, One invoice. Zero headaches.
This comprehensive solution allows OEMs as well as contract manufacturers to reduce costs by simplifying materials management.

For more information about Kitting for PCB Assembly or other Production Services, visit www.arrow.com/productionservices

Arrow Production Services.
We make parts production ready so you don’t have to.

source

Four Tips to Picking a Small-run PCB Assembly Maker

pcb assembly

Working with small-run PCB assemblies has its benefits and drawbacks. As the customer, there are a few helpful tips that can help you make the most from your assembly. In this article, we are going to let you know how to make use of the good things and ways to stay clear of the negative aspects.

Find out how to Pick a Small-run PCB Assembly Maker?

The information brought up just below should help you make the most out of your small-run PCB assembly order.


1. Only One Provider

Go with a small-run PCB producer who could be a one-stop provider for all your PCB requires. The beauty with working with a small order is basically that you don’t need to coordinate with a couple of organizations or individuals. Your order can be handled by a single point of contact.


2. Worth of Prototypes

Even though working with small orders, you must insist upon using prototypes – even though it causes an further expense. Prototypes will permit you to evaluate your design and strengthen it, when necessary.


3. Small-run PCB Maker

pcb assembly

Producing small-run PCB assemblies could be a task when cooperating with an low compertition producer. Given that the order quantity is low, expense of production will probably be a little higher. Subsequently, any misstep on the part of the PCB producer will contribute to higher losses for the customer.


4. Standard PCB Practices

Standard best practices associated with PCB manufacturing really should be followed even though working with a small-run PCB assembly. This can include design, manufacturing, assy, and even PCBA testing processes.

Working with a small-run PCB assembly has its own range of perks. Applying standard guidelines will permit you to build an order that will help you ultimately.

Surface Mount Technology Assembly Line



Surface Mount Technology Assembly Line at Marl International, Cumbria.

The new Marl production line at Ulverston can assemble 22,000 surface mount components per hour including LED diodes onto printed circuit boards (PCBs). At the front end, it has a Nutek NTE0710XL single magazine line loader. It also features a DEK03iX SMT Screen Printer, which respects the environment by using a water-soluble agent to clean the underside of the screen / foil combined with a vacuum system, eliminating the need for chemical cleaners. It also has a Mydata MY9 SMT Placer and a BTU 100a oven.

Website: www.leds.co.uk

source

Four Tricks to Finding a Small-volume PCB Assembly Manufacturer

pwb assy

Working with small-volume PCB assemblies has its upsides and drawbacks. As the customer, there are a few pointers that will allow you to get the most out of your assembly. In this post, we are going to explain how to make use of the benefits and approaches to stay clear of the shortcomings.

Find out how to Select a Small-volume PCB Assembly Manufacturer?

The ideas mentioned below should help you maximum benefit out of your small-volume PCB assembly order.


1. Just One Manufacturer

Pick out a small-volume PCB manufacturer who can be a one-stop service provider for all of your PCB requirements. The main benefit of working with a small order is basically you don’t have to coordinate with several organizations or individuals. Your order can be treated by a single point of contact.


2. Great need of Prototypes

Even when working with small orders, you must require use of prototypes – despite that it comes at an additional expenditure. Prototypes will allow you to verify your design and make improvements to it, if required.


3. Small-volume PCB Manufacturer

pwb assy

Fabricating small-volume PCB assemblies could be a task when hiring an unskilled manufacturer. Since the order quantity is low, expense of production will likely be to some degree higher. Therefore, any mistake on the part of the PCB manufacturer will mean larger losses for the client.


4. Standard PCB Practices

Standard best practices involving PCB manufacturing should be taken regardless if working with a small-volume PCB assembly. This consists of design, fabricating, assembly, as well as PCBA testing procedures.

Working with a small-volume PCB assembly has its own variety of perks. Utilizing standard recommendations will assist you to build an order that will help you in the long run.

FTA PCB assembly



The video is presenting the SMT production proces od FTA PCB assembly.

source

Four Guidelines to Picking a Low-volume PCB Assembly Fabricator

pc board assembly

Working with small-volume PCB assemblies has its benefits and drawbacks. As the client, there are a few helpful tips that can help you get the most out of your assembly. In this posting, we’re going to show you how to make the most of the plus points and approaches to steer clear of the down sides.

Ways to Select a Low-volume PCB Assembly Fabricator?

The ideas mentioned just below might help you maximum benefit from your small-volume PCB assembly order.


1. A Single Service Provider

Pick out a small-volume PCB manufacturer who can be a one-stop service provider for all of your PCB requires. The benefit of working with a small order is basically you don’t have to coordinate with various organizations or individuals. Your order can be treated by a single point of contact.


2. Significance of Prototypes

Even if working with small orders, you must insist upon use of prototypes – despite that it comes at an increased expenditure. Prototypes will permit you to inspect your design and enhance it, if needed.


3. Low-volume PCB Fabricator

pc board assembly

Fabricating small-volume PCB assemblies can be a task when working with an unsophisticated manufacturer. As the order quantity is low, expense of production will be to some degree higher. Consequently, any misstep from the PCB manufacturer will end in higher losses for the customer.


4. Standard PCB Practices

Standard suggestions relating to PCB fabrication must be taken even though working with a small-volume PCB assembly. This can include design, fabrication, assembly, as well as PCBA testing steps.

Working with a small-volume PCB assembly has its own list of positive factors. With the help of standard recommendations will enable you to build an order that might help you down the road.

Raspberry Pi GPIO Tutorial: The Basics Explained



This Raspberry Pi GIO tutorial takes you through a lot of the basics of the GPIO pins and what you can do with them

Full Guide: http://pimylifeup.com/raspberry-pi-gpio/

As you may know the general purpose input and output pins (GPIO) are used to communicate with other circuity. This includes thing such as extension boars, circuits, and much more. You can do some pretty cool stuff with them.

You should beware that playing around with the Raspberry Pi GPIO pins wrongly can result in destroying the Pi. The best way to avoid this is to double check that whatever you’re plugging in will be supported by the Pi.

In the little small circuit, I use in the Raspberry Pi GPIO tutorial I use the following equipment.

• 1 100-ohm resistor
• 1x Red LED
• GPIO Breakout Kit Assembled
• Breadboard
• Breadboard Wire/Jumper Cables

There is quite a bit of terminology around these pins but be sure to not let this turn you off from using them. We go into the terminology a little in the video but if you need more information be sure to look up some of the terms I used.

In the video we display a Raspberry Pi GPIO pinout diagram. If you would like this to use for future reference, then be sure head over the guide. You can find the link above.

We will be looking at doing many projects using the GPIO pins in the future. This includes stuff such as home automation! This is something I know a lot of people have been asking about.

I hope you have enjoyed this video on the Raspberry Pi GPIO pins. If you have any questions, feedback or anything else feel free to drop us a comment below. Also be sure to subscribe so you can stay up to date with all our latest Raspberry Pi projects, guides and much more.

source

Raspberry Pi Substitutes: The Reason Why They Are a Better Buy

Raspberry Pi isn’t the baddest mini computer all over the world, and it is what its opponents are endeavoring to explain to the remainder of the world. Now and then, a fresh mini computer is launched out there promising to be the largest one to overcome Raspberry Pi. The fact is, there’s a new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and is priced at $30.

The Raspberry Pi is introduced with four models in recent years. These include Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most recently released which is Pi 3 Model B.

Pi 3 was established to make certain that Raspberry Pi is able to please a person with a better value computer for developer work. It’s upgraded Processor chip with the Cortex A53, Hackaday announced, and runs on 1.2 GHz. At $35, the Raspberry Pi is the best-selling of all.

The Raspberry Pi, even so, isn’t the merely single board computer(SBC) for homebrewed projects. There are a variety more sold in the market that is less expensive, and then some that can do more than Raspberry Pi for a little extra, ZD Net announced.

For a start, there’s the Omega 2, that features a modular nature granting computer programmers to add in Wireless bluetooth or Gps system effortlessly. It has integrated Wi-Fi and flash memory; the Operating platform is Linux distro based on the OpenWrt system. The Omega 2 is priced at $5 and can even operate on FreeBSD Operating system, and that is why it really is perfect for college students.

The BBC Micro:bit is priced at $16 and is excellent for school students for their studying and prototyping projects. A 32-bit ARM Cortex cpu energizes it from the inside and it is different from the others simply because of its 5×5 LED matrix. This feature delivers 25 singularly programmable red LEDs for basic output.

In addition, there is the BeagleBone Black, which is priced at $55 and similar to the Raspberry Pi, is another community-supported platform both for lovers and designers. The system functions rapid; it does boost Linux in only 10-seconds and can develop in below 5 minutes. It’s fueled by AM335x 1GHz ARM Cortex-A8 as well as 512MB DDR3 RAM.

A fresh one is the NanoPi M1 Plus, that has been named as the new Raspberry Pi killer. At $30, it promises to have a better made design and layout and was competent to assimilate vital features similar to Wi-Fi and Bluetooth. What’s more, it offers an Infrared receiver, microphone, 8GB memory, and power and reset keys.

Yet, the perfect attribute of NanoPi M1 Plus is its capacity to run Ubuntu-Mate, Ubuntu-Core, and also Debian, Beta News revealed. It is appropriate for firm users, developers, lovers, and school students.

nanopi m1 plus specs

FriendlyElec launches Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Know more on official site: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

There is a new Raspberry Pi competitor that is quite economical. To put it accurately, some individuals may see it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an certainly superb design and layout, plus critical built-in features just like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

87% Faster PCB Assembly



Advanced Assembly has developed a proprietary system for machine-placing all SMT components for pcb assembly. This allows us to assemble boards 87% faster than other shops with great accuracy and repeatability. Contact us at: www.aapcb.com or 1-800-838-5650.

source

Four Tips to Picking a Small-quantity PCB Assembly Producer

pcb assembly

Working with small-quantity PCB assemblies has its advantages and cons. As the client, there are some helpful tips that will let you maximum benefit out of your assembly. Here, we’re going to show you how to make the most of the possible benefits and approaches to steer clear of the negative aspects.

How one can Pick a Small-quantity PCB Assembly Producer?

The tips brought up here can help you get the most out of your small-quantity PCB assembly order.


1. Only One Provider

Choose a small-quantity PCB manufacturer who could be a one-stop service provider for all your PCB demands. The great thing about working with a small order is that you don’t need to coordinate with a couple of organizations or individuals. Your order can be treated by a single point of contact.


2. Importance of Prototypes

Even though working with small orders, you must insist on using prototypes – despite that it comes at an increased cost. Prototypes will enable you to review your design and enhance it, if required.


3. Small-quantity PCB Producer

pcb assembly

Fabricating small-quantity PCB assemblies could be a task when using the services of an not experienced manufacturer. Given that the order quantity is low, expense of production will be a little higher. As a result, any misstep by the PCB manufacturer will result in higher losses for the buyer.


4. Standard PCB Practices

Standard suggestions concerning PCB producing needs to be obeyed although working with a small-quantity PCB assembly. This can include design, manufacturing, assy, and PCBA testing steps.

Working with a small-quantity PCB assembly has its own range of pluses. Using standard guidelines will enable you to build an order that can help you in the end.

SOLIDWORKS PCB: Assembly Variants



Developing and managing multiple product configurations from one PCB project is done through Variants in SOLIDWORKS PCB. Use Assembly Variants to un-install components or even completely load a different component, as an alternative replacement part onto the same PCB. This is can be done while automating the multiple assembly files required for each configuration including BOM, pick and place, PCB assembly drawings and schematics. Variants eliminates the need to create a unique version of the design for each variation. Learn more: Learn more about ECAD/MCAD collaboration: http://solidworkspcb.com/

source

Four Tricks to Picking a Low-volume PCB Assembly Fabricator

printed circuit board assemblies

Working with small-volume PCB assemblies has its advantages and disadvantages. As the customer, there are several hints that will allow you to obtain the most out of your assembly. In this posting, we will explain how to maximize the positives and the ways to move around the negative aspects.

The way to Decide on a Low-volume PCB Assembly Fabricator?

The information talked about just below should help you get the most from your small-volume PCB assembly order.


1. Single Service Provider

Pick out a small-volume PCB maker who could be a one-stop provider for all your PCB needs. The advantage of working with a small order is basically you don’t need to coordinate with several organizations or individuals. Your order can be treated by a single point of contact.


2. Value of Prototypes

Although working with small orders, you must require use of prototypes – though it results in an added cost. Prototypes will allow you to check your design and make improvements to it, at will.


3. Low-volume PCB Fabricator

printed circuit board assemblies

Fabricating small-volume PCB assemblies could be a task when using the services of an unsophisticated maker. For the reason that order quantity is low, cost of production will likely be more or less higher. Accordingly, any mistake by the PCB maker will lead to increased losses for the buyer.


4. Standard PCB Practices

Standard tips concerning PCB manufacturing really should be followed despite the fact that working with a small-volume PCB assembly. This can include design, fabrication, assemblage, and also PCBA testing processes.

Working with a small-volume PCB assembly has its own group of plus points. Implementing standard tips will assist you to build an order that will help you eventually.

CATIA V5 Flexible PCB Design

source

Four Rules to Picking out a Small-quantity PCB Assembly Fabricator

pcb assy

Working with low-volume PCB assemblies has its upsides and downsides. As the client, there are several suggestions that will allow you to maximum benefit from your assembly. In this post, we’re going to explain how to take advantage of the pros and the ways to move around the problems.

How you can Pick out a Small-quantity PCB Assembly Fabricator?

These tips listed here may help you get the most out of your low-volume PCB assembly order.


1. One Provider

Find a low-volume PCB producer who can be a one-stop service provider for all of your PCB requirements. The main benefit of working with a small order is basically that you don’t need to coordinate with several organizations or individuals. Your order can be handled by a single point of contact.


2. Incredible importance of Prototypes

Even though working with small orders, you must insist on using prototypes – even in the event it comes at an increased expense. Prototypes will permit you to check your design and fix it, if necessary.


3. Small-quantity PCB Fabricator

pcb assy

Manufacturing low-volume PCB assemblies could be a task when cooperating with an rookie producer. As the order quantity is low, cost of production will be gently higher. So, any error on the part of the PCB producer will bring on higher losses for the purchaser.


4. Standard PCB Practices

Standard guidelines involving PCB making should be followed despite the fact that working with a low-volume PCB assembly. This can include design, fabricating, assy, and even PCBA testing steps.

Working with a low-volume PCB assembly has its own couple of plus points. Taking advantage of standard guidelines enables you to build an order that may help you in the future.

Part 4 Testing PCB assemblies



This is the fourth part of a 30 day series that ‘Demystifies hardware products’ and shows how they are built from scratch. We hope this is useful to entrepreneurs, followers of our product and even to skeptics of hardware startups !

source

4 Guidelines to Picking out a Low-quantity PCB Assembly Maker

printed circuit board assy

Working with small-volume PCB assemblies has its benefits and downsides. As the consumer, there are a few recommendations that will allow you to obtain the most from your assembly. In this article, we shall show you how to exploit the good things and ways to move around the negatives.

Tips on how to Choose a Low-quantity PCB Assembly Maker?

The guidelines explained just below should help you maximum benefit from your small-volume PCB assembly order.


1. Single Service Provider

Pick a small-volume PCB fabricator who can be a one-stop service provider for all of your PCB demands. The best thing about working with a small order is you don’t have to coordinate with various organizations or individuals. Your order can be handled by a single point of contact.


2. Significance of Prototypes

Even when working with small orders, you must require use of prototypes – even if it causes an increased expenditure. Prototypes will help you to look into your design and improve on it, as needed.


3. Low-quantity PCB Maker

printed circuit board assy

Making small-volume PCB assemblies could be a task when working with an inexperienced fabricator. Because the order quantity is low, expense of production will likely be gently higher. As a result, any error on the part of the PCB fabricator will contribute to larger losses for the customer.


4. Standard PCB Practices

Standard guidelines involving PCB making needs to be adopted even though working with a small-volume PCB assembly. This can include design, manufacturing, assembly, and additionally PCBA testing procedures.

Working with a small-volume PCB assembly has its own list of benefits. With standard tips will allow you to build an order that may help you in the future.

VisionBot P&P Software and PCB Assembly Test



This video shows an early version of the VisionBot Pick and Place main software and how to start a PCB Production

source

Four Ideas to Picking a Small-volume PCB Assembly Producer

pwb assy

Working with low-volume PCB assemblies has its benefits and disadvantages. As the consumer, there are several points that will help you maximum benefit out of your assembly. On this page, we shall let you know how to capitalize on the good things and the ways to bypass the negative aspects.

Tips to Select a Small-volume PCB Assembly Producer?

The guidelines talked about here should help you get the most from your low-volume PCB assembly order.


1. Single Provider

Pick a low-volume PCB manufacturer who can be a one-stop service provider for all of your PCB needs. The advantage of working with a small order is you don’t need to coordinate with several organizations or individuals. Your order can be handled by a single point of contact.


2. Incredible importance of Prototypes

Even if working with small orders, you must require using prototypes – even in the event it leads to an added expenditure. Prototypes will allow you to inspect your design and improve on it, if needed.


3. Small-volume PCB Producer

pwb assy

Making low-volume PCB assemblies could be a task when hiring an unsophisticated manufacturer. Given that the order quantity is low, cost of production will probably be a little higher. And so, any misstep from the PCB manufacturer will end up in larger losses for the purchaser.


4. Standard PCB Practices

Standard best practices concerning PCB making ought to be followed even though working with a low-volume PCB assembly. This consists of design, fabrication, assembly, and even PCBA testing procedures.

Working with a low-volume PCB assembly has its own set of advantages. Utilising standard suggestions will allow you to build an order that can help you in the future.

Printed Circuit Board Assembly, Soldering, Transportation with ORIGA linear actuators



http://www.parker-origa.com/2011-03-PILZ.9420.0.html?&L=1

Printed Circuit Board transportation with maximum precision and reliability

When it comes to populating, soldering, assembling and testing the boards of its le-gendary PNOZ® safety relays, the best is only just good enough for technology leader PILZ. But the meticulous standards demanded by the PILZ experts for factory automa-tion extend further, and encompass the flow of materials, transportation of the popu-lated boards to the soldering unit, and feed of the assembled devices into the testing stations. Which is why the superbly reliable and high-precision electrical drives from the ORIGA OSP-E series from Parker Hannifin perform the transportation and feed tasks on the highly automated population and assembly system.

source

Four Guidelines to Selecting a Low-volume PCB Assembly Manufacturer

pcb board assemblies

Working with small-run PCB assemblies has its advantages and cons. As the consumer, there are several strategies that can help you maximum benefit out of your assembly. Here, we’ll let you know how to make use of the advantages and the ways to steer clear of the negative aspects.

Methods to Choose a Low-volume PCB Assembly Manufacturer?

The guidelines brought up here should help you obtain the most from your small-run PCB assembly order.


1. One Manufacturer

Find a small-run PCB fabricator who could be a one-stop service provider for all of your PCB needs. The great thing about working with a small order is that you don’t have to coordinate with a couple of organizations or individuals. Your order can be handled by a single point of contact.


2. Great need for Prototypes

Even if working with small orders, you must insist upon using prototypes – despite that it comes at an additional expense. Prototypes will let you look into your design and refine it, if needed.


3. Low-volume PCB Manufacturer

pcb board assemblies

Manufacturing small-run PCB assemblies could be a task when employing an not experienced fabricator. Because the order quantity is low, cost of production will be gently higher. As a result, any error from the PCB fabricator will bring about increased losses for the customer.


4. Standard PCB Practices

Standard guidelines involving PCB fabricating ought to be adopted although working with a small-run PCB assembly. This consists of design, manufacturing, assemblage, and PCBA testing procedures.

Working with a small-run PCB assembly has its own couple of perks. Using standard guidelines enables you to build an order that might help you ultimately.

Older posts Newer posts

© 2018 PCB Prototype

Up ↑