PCB Prototype

Rapid PCB Prototype Service

Month: March 2017 (page 2 of 10)

Installing openHAB on the Raspberry PI (tutorial – part I – Getting openHAB to run)



++++++++Raspberry PI2 Kit http://amzn.to/1YuRiKM ++++++++

Here is a complete installation, of OpenHAB, from zero to hero.

Sorry for taking such a long time, but I feel it’s better, as we went through most frequent problems that could arise, so you could get a better view of the whole process.

Here you can get a complete kit, for running OSMC as a media center, on which you can also install OpenHAB.
http://amzn.to/1Le15cs

Feel free to post any questions below, and don’t forget to like, share and subscribe if you want more videos like this.

PUTTY

SCP

http://www.openhab.org/getting-started/

http://raspberrypi.stackexchange.com/questions/4683/how-to-install-the-java-jdk-on-raspberry-pi

http://www.oracle.com/technetwork/java/javase/downloads/jdk8-downloads-2133151.html

source

Raspberry Pi Alternate Options: The Reason Why They’re a Greater Buy

Raspberry Pi isn’t the baddest mini PC globally, and it is what its challengers are wanting to convey to the remainder of the world. Now and then, a fresh mini computer is launched out there promising to be the largest one to take down Raspberry Pi. In actual fact, there is a new Raspberry Pi killer referred to as NanoPi M1 Plus, which is Ubuntu-Linux ready and is priced at $30.

The Raspberry Pi is launched with 4 models in the past. They include Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most recently released which is Pi 3 Model B.

Pi 3 was designed to be sure that Raspberry Pi has the potential to meet up with a person with a low-cost PC for programming. It’s upgraded Processor chip with the Cortex A53, Hackaday revealed, and runs on 1.2 GHz. Costing $35, the Raspberry Pi is the most fashionable of all.

The Raspberry Pi, nevertheless, isn’t the single single board computer(SBC) for homebrewed projects. There are lots more in the market which are less costly, and then some that can do more than Raspberry Pi for a little bit more, ZD Net reported.

To start with, there’s the Omega 2, that includes a modular nature allowing for computer programmers to add on Bluetooth or Gps unit straightforwardly. It has internal Wi-Fi and flash storage; the Operating-system is Linux distro founded on the OpenWrt program. The Omega 2 will set you back $5 and can run on FreeBSD Operating system, which describes why it’s just the thing for high school students.

The BBC Micro:bit will set you back $16 and is ideal for students for their studying and prototyping projects. A 32-bit ARM Cortex central processor drives it internally and it excels from the remaining due to the 5×5 LED matrix. This feature offers 25 singularly programmable red-colored LEDs for basic output.

Moreover, there is the BeagleBone Black, which will set you back $55 and like the Raspberry Pi, is yet another community-supported platform both for amateurs and builders. It really works rapid; it is able to boost Linux in less than 10 seconds and can develop in within 5 minutes. It is motivated by AM335x 1GHz ARM Cortex-A8 plus 512MB DDR3 RAM.

One more is the NanoPi M1 Plus, which was referred to as as the latest Raspberry Pi killer. Priced at $30, it promises to have a tougher layout and design and was capable to include crucial options for example , Wi-Fi and Wireless BT. Also, it offers an Infrared receiver, mic, 8GB memory space, and power and reset control keys.

Yet, the most excellent function of NanoPi M1 Plus is its power to run Ubuntu-Mate, Ubuntu-Core, and even Debian, Beta News revealed. It’s best for firm users, coders, amateurs, and students.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Get more info on official webpage: http://friendlyarm.com/index.php?route=product/product&product_id=176

You can find a new Raspberry Pi contender that is quite low-priced. In fact, a lot of people may see it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an arguably superb layout and design, and additionally essential integrated features like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

PCB Assembly



Useful Links
http://www.triodepcb.com/
http://pageantiques.com.au/
http://www.heuristic.com.au
PCB Assembly
Services of PCB Assembly
Material Management
Triode provides a turnkey concepts to material management that is having the aspects of component procurement and the inventory control.
Rework and modifications
Sometimes deisign is not working as we accepted or planned.From chip components to BGA’s Triode team can perform all he types of rework and modifications.
Production PCB Assembly
Here Two automatic surface Mount Assembly lines are here with the capacity of greater than 32,000 components per hour.Here Triode is our partner to move products into large mass production.
Component Sourcing
Our manufacturing services is having full turnkey assembly.Here Triode partners are with leading domestic and international authorised distributors for the supply of PCB’s and components.
ProtoTypes and NPI Assembly
Here at Triode we understand the importance of rapid prototype PCB assembly.This is to validate electronic designs and bring all the new products into the market.
PCB Assembly Capability Summary
Here Triode group Limited is a leading manufacturer of PCB Assemblies.
Through Hole Assembly
Here Our through hole assemblers work accurately and efficiently to get quality manual assembly.We can perform all levels of PTH assembly here.

source

Four Strategies to Selecting a Low-volume PCB Assembly Producer

pwb assembly

Working with small-volume PCB assemblies has its upsides and cons. As the purchaser, there are a few points that can help you obtain the most from your assembly. Below, we will explain how to maximize the advantages and the ways to get around the down sides.

Simple methods to Pick out a Low-volume PCB Assembly Producer?

The tips pointed out below might help you make the most out of your small-volume PCB assembly order.


1. Just One Manufacturer

Opt for a small-volume PCB manufacturer who can be a one-stop service provider for all of your PCB requires. The advantage of working with a small order is basically that you don’t have to coordinate with a couple of organizations or individuals. Your order can be treated by a single point of contact.


2. Importance of Prototypes

Even if working with small orders, you must require using prototypes – despite the fact that it brings about an extra expense. Prototypes will help you to inspect your design and make improvements to it, at will.


3. Low-volume PCB Producer

pwb assembly

Manufacturing small-volume PCB assemblies can be a task when cooperating with an unsophisticated manufacturer. Because the order quantity is low, expense of production will probably be more or less higher. As a result, any error on the part of the PCB manufacturer will end in larger losses for the consumer.


4. Standard PCB Practices

Standard recommendations associated with PCB producing needs to be obeyed although working with a small-volume PCB assembly. This includes design, fabricating, assemblage, and additionally PCBA testing processes.

Working with a small-volume PCB assembly has its own variety of gains. Utilising standard guidelines will help you to build an order that might help you in the long term.

Setting up Retropie on a Raspberry Pi 3 for an Arcade Cabinet



In this video we will go over the process of installing RetroPie onto a Raspberry Pi 3, configuring an NES (USB remake) gamepad, and installing a Super Mario Bros game.

To find out more and go further in-depth read the article on TheGeekPub.com:

Setting up RetroPie on a Raspberry Pi 3

PRODUCTS USED IN THIS VIDEO:
* Raspberry Pi 3: http://amzn.to/2lU7gRK
* 32GB SD Card: http://amzn.to/2nx9rqI
* USB NES Classic Controller: http://amzn.to/2lU5vEg
* Acer 24″ Monitor: http://amzn.to/2mk4QIm

Follow me on social media:
Facebook: facebook.com/TheGeekPub
Instagram: instagram.com/TheGeekPub

Support me on Patreon:
Patreon.com/TheGeekPub

source

Raspberry Pi Substitutes: The Reason They’re a Better Buy

Raspberry Pi is not the baddest micro PC around the world, and it’s what its challengers are endeavoring to tell the remainder of the world. Now and then, a new mini computer is released on the market promising to be the biggest one to overcome Raspberry Pi. For that matter, there is a new Raspberry Pi killer known as NanoPi M1 Plus, which is Ubuntu-Linux ready and priced at $30.

The Raspberry Pi is launched with four models over the years. These include Raspberry Pi Model B+, Pi 2 Model B, Zero, and the newest which is Pi 3 Model B.

Pi 3 was designed to be sure Raspberry Pi has the potential to delight a person with an economical PC for computer programming. It has improved CPU with the Cortex A53, Hackaday declared, and runs on 1.2 GHz. Costing $35, the Raspberry Pi is the most widely used of all.

The Raspberry Pi, but the truth is, is not the merely single board computer(SBC) for homebrewed projects. There are a number more out there which is less expensive, and then some that can do more than Raspberry Pi for a little extra, ZD Net stated.

To begin with, there is the Omega 2, that has a modular nature enabling coders to integrate Bluetooth or GPS without problems. It has built-in Wi-Fi and flash memory; the OS is Linux distro based on the OpenWrt program. The Omega 2 costs $5 and can even operate on FreeBSD OS, which is why it is appropriate for people in the course.

The BBC Micro:bit costs $16 and is just the thing for school students for their learning and prototyping projects. A 32-bit ARM Cortex processor chip energizes it from the inside and it stands apart from the competition because of the 5×5 LED matrix. This element offers 25 independently programmable red LEDs for basic output.

There is also the BeagleBone Black, which costs $55 and similar to the Raspberry Pi, is additionally a community-supported platform both for enthusiasts and developers. It does work rapidly; it could boost Linux in lower than 10-seconds and can develop in less than 5 minutes. It is actually driven by AM335x 1GHz ARM Cortex-A8 and 512MB DDR3 RAM.

Yet another one is the NanoPi M1 Plus, which was known as as the newest Raspberry Pi killer. Priced at $30, it promises to have a better made design and layout and was competent to add in crucial elements just like Wi-Fi and Bluetooth. In addition, it features an Infrared receiver, mic, 8GB storage space, and power and reset control buttons.

Even so, the most desirable attribute of NanoPi M1 Plus is its capability to run Ubuntu-Mate, Ubuntu-Core, and also Debian, Beta News expressed. It is appropriate for firm users, coders, enthusiasts, and school students.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi substitute

Get more info on official website: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

You will find a new Raspberry Pi opponent that is quite cost-effective. The fact is, many people may view it as a Pi substitute. The $30 FriendlyElec NanoPi M1 Plus has an arguably top-notch design and layout, as well as essential built-in features like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

PCB Manufacturer



Useful Links
http://www.triodepcb.com/
http://pageantiques.com.au/
http://www.triodepcb.com/index.php/services/electronic-assembly
PCB Manufacturer
Services of Triode PCB Assembly
Assembly Capabilities
Triode Group Limited is one of the leading manufacturer of PCB Assemblies.In the single point of contact triode group providing a full turnkey assembly.
Material Management
A turnkey approach to material management this is providing by a triode.This includes all aspects of component procurement and inventory control.
Mechanical Assembly
To our customers triode group limited providing a complete product supply solutions.Electronic product assembly requires both quality production facility and a range of capabilities.
Assembly and Packaging Benefits are :
First one is No minimum order quantity,Second is High quality production,Third is all manufacturing under one company,Fourth is Full turnkey or consignment.
Component Sourcing
We are having experience of our purchasing team.This experience frees your time so you can concentrate on core competencies like research and development,the sales,the marketing and distribution.
Production PCB Assembly
In the services surface mount PCB assembly is the one of the heart of the PCB Assembly.Surface mount PCB assembly providing by triode and supports much of our manufacturing Activity.
Triode Group Limited is a focussing on providing manufacturing services to customers,that is operating in a variety of high reliability market sectors.
To manufacture to invoicing,purchasing and project management triode uses the ERP to provide traceability.Triode is a ISO 9001:2008 certified.

source

Four Ideas to Finding a Small-run PCB Assembly Producer

printed circuit board assy

Working with low-volume PCB assemblies has its upsides and drawbacks. As the buyer, there are some guidelines that can help you obtain the most out of your assembly. Below, we will let you know how to benefit from the pros and approaches to get around the negative aspects.

How one can Choose a Small-run PCB Assembly Producer?

The information referred to just below should help you maximum benefit out of your low-volume PCB assembly order.


1. One Manufacturer

Pick out a low-volume PCB manufacturer who can be a one-stop service provider for all your PCB needs. The advantage of working with a small order is that you don’t need to coordinate with a couple of organizations or individuals. Your order can be handled by a single point of contact.


2. Incredible importance of Prototypes

Although working with small orders, you must insist on use of prototypes – though it generates an increased expenditure. Prototypes will let you inspect your design and fix it, when required.


3. Small-run PCB Producer

printed circuit board assy

Producing low-volume PCB assemblies could be a task when using the services of an unsophisticated manufacturer. Because the order quantity is low, cost of production will be a little higher. As a result, any error from the PCB manufacturer will induce larger losses for the client.


4. Standard PCB Practices

Standard best practices relating to PCB producing really should be implemented even when working with a low-volume PCB assembly. This consists of design, manufacturing, assembly, and in addition PCBA testing steps.

Working with a low-volume PCB assembly has its own group of benefits. Employing standard tips will help you to build an order that might help you over the long haul.

Raspberry Pi – Adding Bluetooth



In this video we will be looking at using a usb dongle with the raspberry pi and how to connect a bluetooth enabled device, in this case an android cell phone, to the pi.

Helpful links:

Raspberry Pi Bluetooth Setup
http://www.pridopia.co.uk/rs-pi-set-bluetooth.html

Connect smart device to PI
http://www.raspberrypi.org/forums/viewtopic.php?p=521067

Support the channel tip with bitcoins
Address: 1MvcZHRbDm9czS8s776iutBBPJ39K4PEHh

Follow me on Instructables
http://www.instructables.com/member/misperry

Follow me on Twitter

T-Shirts
http://www.zazzle.com/misperry

source

Raspberry Pi Substitutes: Exactly Why They Are a Greater Buy

Raspberry Pi isn’t the baddest small PC on the globe, and it’s what its rivals are endeavoring to inform the rest of the world. Now and then, a new mini computer is launched on the market promising to be the biggest one to overcome Raspberry Pi. To put it accurately, you will find there’s new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and priced at $30.

The Raspberry Pi is released with 4 variations in recent years. Examples of these are Raspberry Pi Model B+, Pi 2 Model B, Zero, and the latest which is Pi 3 Model B.

Pi 3 was created to ensure that Raspberry Pi will satisfy a person with a low-priced PC for coding. It has improved Processor chip with the Cortex A53, Hackaday revealed, and runs on 1.2 GHz. At $35, the Raspberry Pi is the best selling of all.

The Raspberry Pi, unfortunately, isn’t the solely single board computer(SBC) for homebrewed projects. There are tons more for sale which are less expensive, and then some that can do more than Raspberry Pi for a little more, ZD Net described.

First off, there’s the Omega 2, sporting a modular nature permitting coders to introduce Bluetooth or GPS straightforwardly. It has internal Wi-Fi and flash storage area; the Operating platform is Linux distro on top of the OpenWrt program. The Omega 2 charges $5 and can also operate on FreeBSD Operating-system, this is why it really is great for college students.

The BBC Micro:bit charges $16 and is just the thing for learners for their learning and prototyping projects. A 32-bit ARM Cortex processor chip energizes it internally and it is unique from the remainder due to the 5×5 LED matrix. This attribute delivers 25 individually programmable red Led lights for basic output.

There’s also the BeagleBone Black, which charges $55 and much like the Raspberry Pi, is in addition a community-supported platform both for enthusiasts and developers. The system functions speedy; it is able to boost Linux in less than 10 seconds and can develop in under Five minutes. It’s motorized by AM335x 1GHz ARM Cortex-A8 and 512MB DDR3 RAM.

Another one is the NanoPi M1 Plus, that was named as the new Raspberry Pi killer. At $30, it promises to have a more robust design and layout and was in a position to integrate worthwhile benefits for instance Wi-Fi and Wireless bluetooth. What’s more, it offers you an IR receiver, mic, 8GB memory space, and power and reset keys.

And yet, the most beneficial attribute of NanoPi M1 Plus is its capability to run Ubuntu-Mate, Ubuntu-Core, as well as Debian, Beta News revealed. It’s useful for company users, programmers, lovers, and learners.

nanopi m1 plus specs

FriendlyElec rolls out Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi alternative

Find out more on official web site: http://friendlyarm.com/index.php?route=product/product&product_id=176

There’s a new Raspberry Pi opponent that is quite cheap. In truth, some individuals may consider it as a Pi alternative. The $30 FriendlyElec NanoPi M1 Plus has an certainly superior design and layout, as well as essential included features like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

PCB Manufacturer



http://www.triodepcb.com/
http://www.triodepcb.com/index.php/services/electronic-assembly
http://www.birthdaygiftsonline.net.au/
http://www.royalgifts.net.au/
http://pioneerdental.com.au/our-services/
PCB Assembly
In Hillside Road, Wairau Valley, Auckland, and New Zealand there our Triodepcb Limited Electronics Manufacturing Services located.
Triode service contains variety of manufacturing: Material management, Product Assemblies, PCB Assemblies.
Product Assemblies contains these works: Functional Testing, Harness Assembly and Cable, Product Testing, Box Build Assemblies and Final Packaging.
Electronic manufacturing Melbourne
PCB Assemblies contains these works: Assembly Capabilities, Prototype PCB Assembly, PCB Assembly Rework, RoHS Lead Free Assembly, and Production PCB Assembly.
Material management: Component Sourcing, Partial Turnkey, Quick-Turn Procurement, Full Turnkey, Consignment Services, Customer Inventory Login.
Triodepcb group Electronics manufacturing is a leading PCB manufacturing, PCB Assemblies is ISO 9001:2008 certified.

source

4 Ideas to Picking a Small-volume PCB Assembly Producer

printed circuit board assembly

Working with small-run PCB assemblies has its benefits and downsides. As the consumer, there are a few recommendations that will assist you to get the most out of your assembly. In this article, we shall let you know how to utilize the plus points and the ways to steer clear of the negative aspects.

The right way to Choose a Small-volume PCB Assembly Producer?

The guidelines listed down the page should help you obtain the most from your small-run PCB assembly order.


1. Only One Service Provider

Find a small-run PCB manufacturer who can be a one-stop service provider for all your PCB requires. The beauty with working with a small order is that you don’t need to coordinate with a couple of organizations or individuals. Your order can be handled by a single point of contact.


2. Importance of Prototypes

Even if working with small orders, you must require using prototypes – even in the event it generates an increased expense. Prototypes will permit you to inspect your design and enhance it, if needed.


3. Small-volume PCB Producer

printed circuit board assembly

Manufacturing small-run PCB assemblies can be quite a task when collaborating with an rookie manufacturer. Since the order quantity is low, cost of production will be a little bit higher. Thus, any mistake by the PCB manufacturer will set off higher losses for the customer.


4. Standard PCB Practices

Standard tips associated with PCB production ought to be implemented although working with a small-run PCB assembly. This consists of design, fabricating, assembly, and even PCBA testing procedures.

Working with a small-run PCB assembly has its own list of pros. Employing standard guidelines will let you build an order that will help you in the end.

How To Install KODI On a Raspberry Pi 3



Here is how to install Kodi on the new Raspberry Pi 3 using OpenELEC. http://www.wirelesshack.org/how-to-install-kodi-on-a-raspberry-pi-3.html

source

Raspberry Pi Substitutes: Why They’re a Better Buy

Raspberry Pi is not the baddest mini PC on the globe, and it is what its challengers are trying to tell the rest of the world. Now and then, a new mini computer is launched on the market promising to be the biggest one to defeat Raspberry Pi. If truth be told, there exists a new Raspberry Pi killer named NanoPi M1 Plus, which is Ubuntu-Linux ready and priced at $30.

The Raspberry Pi is launched with 4 variations in the past. These consist of Raspberry Pi Model B+, Pi 2 Model B, Zero, and the latest which is Pi 3 Model B.

Pi 3 was made to confirm that Raspberry Pi has the ability to delight anybody with a well priced PC for coding. It has improved Processor chip with the Cortex A53, Hackaday expressed, and runs on 1.2 GHz. At $35, the Raspberry Pi is the most sought-after of all.

The Raspberry Pi, nevertheless, is not the single single board computer(SBC) for homebrewed projects. There are a variety more on the market that will cost less, and then some that can do more than Raspberry Pi for a bit more, ZD Net expressed.

To start, there’s the Omega 2, sporting a modular nature enabling programmers to increase Bluetooth or Gps system incredibly easily. It has in-built Wi-Fi and flash storage space; the Operating-system is Linux distro established on the OpenWrt system. The Omega 2 costs you $5 and can also operate on FreeBSD Operating-system, and that is why it is really created for students.

The BBC Micro:bit costs you $16 and is good for school students for their training and prototyping projects. A 32-bit ARM Cortex central processor energizes it internally and it stands apart from the others for the 5×5 LED matrix. This feature gives 25 independently programmable red Led lights for basic output.

There is also the BeagleBone Black, which costs you $55 and similar to the Raspberry Pi, is also a community-supported platform both for hobbyists and builders. It really works speedy; it does boost Linux in only 10 seconds and can develop in within Five minutes. It’s pushed by AM335x 1GHz ARM Cortex-A8 plus 512MB DDR3 RAM.

One more is the NanoPi M1 Plus, that was referred to as as the new Raspberry Pi killer. At $30, it promises to have a better design and layout and was in a position to combine beneficial abilities for instance Wi-Fi and Bluetooth. Furthermore, it has got an IR receiver, microphone, 8GB memory space, and power and reset buttons.

On the other hand, the most useful function of NanoPi M1 Plus is its ability to run Ubuntu-Mate, Ubuntu-Core, and even Debian, Beta News published. It is good for business users, coders, hobbyists, and school students.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Find out more on official webpage: http://friendlyarm.com/index.php?route=product/product&product_id=176

You will find there’s new Raspberry Pi competitor that is quite low-priced. In reality, a number of people might view it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an arguably excellent design and layout, along with important in-built features just like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Solder Jet Paste Printing for Surface Mount PCB Assembly (BGA & PoP capability)



Advanced surface mount PCB assembly services with solder jet printing technology at Gemini Tec UK.

For the assembly of package on package (PoP devices) and BGA chips onto printed circuit boards for prototype and production orders.

The solder paste is deposited without the need for stencils, the paste is being printed directly onto the SMT pad on demand, just prior to the placement of the SMT device.

The amount of solder paste is tailored to meet the exact requirements of the SMT device and pad. This process removes many of the typical errors that lead to poor quality PCB assemblies. These errors can include over paste – causing short circuits in the oven reflow process, or insufficient solder volumes, leading to time consuming re-work and reliability concerns.

The MYCRONIC MY500 checks solder paste deposits with a optical cameras and can even re-apply paste if ever required. The jet placement head pulls at over 4G as it deposits thousands of solder paste spheres onto each SMT pad, ready for SMT placement.

This process is used to obtain high yield SMT production of BGA and leadless device chips, including Package on Package (PoP). These devices are now used within the Raspberry Pi product, (currently being made in volume by Sony UK) Using solder jet printing technology we can offer customers a cost effective entry into PoP and BGA technology for prototype and production orders.

Contact us for more information on solder jet printing and advanced PCB assembly services from our UK facility.

www.geminitec.co.uk

source

4 Guidelines to Deciding on a Small-volume PCB Assembly Producer

pc board assembly

Working with small-quantity PCB assemblies has its upsides and disadvantages. As the purchaser, there are some helpful tips that will help you obtain the most from your assembly. Below, we will let you know how to make the most of the pluses and approaches to steer clear of the negative aspects.

The best way to Pick out a Small-volume PCB Assembly Producer?

The information explained in this article should help you get the most out of your small-quantity PCB assembly order.


1. Single Manufacturer

Select a small-quantity PCB manufacturer who can be a one-stop provider for all your PCB demands. The best thing about working with a small order is you don’t need to coordinate with several organizations or individuals. Your order can be handled by a single point of contact.


2. Great need for Prototypes

Even when working with small orders, you must require using prototypes – regardless if it brings about an additional expense. Prototypes will permit you to look into your design and make improvements to it, at will.


3. Small-volume PCB Producer

pc board assembly

Producing small-quantity PCB assemblies can be quite a task when using the services of an inexperienced manufacturer. Because the order quantity is low, expense of production will likely be a little bit higher. Hence, any misstep by the PCB manufacturer will be responsible for increased losses for the buyer.


4. Standard PCB Practices

Standard tips related to PCB manufacturing needs to be obeyed even though working with a small-quantity PCB assembly. This can include design, fabricating, assembly, and even PCBA testing steps.

Working with a small-quantity PCB assembly has its own list of advantages. Using standard guidelines will help you to build an order that may help you eventually.

Raspberry Pi – Tutorial 12 – Networking – How to Configure a Static IP Address & Setup Wifi



This tutorial will show you how to configure a static IP address for your Pi as well as setup a usb wifi adapter from Adafruit.

Putty – Windows SSH/Telnet Software: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
Wifi Adapter: http://www.adafruit.com/products/814
Free Pi Hosting: https://www.edis.at/en/server/colocation/austria/raspberrypi/

Recommended Reading…

DHCP: http://en.wikipedia.org/wiki/Dhcp
Private Networks: http://en.wikipedia.org/wiki/Private_network
NAT: http://en.wikipedia.org/wiki/Network_address_translation

source

Raspberry Pi Substitutes: Why They’re a Better Buy

Raspberry Pi isn’t the baddest mini computer across the world, and it is what its challengers are endeavoring to tell the rest of the world. Now and then, a new mini computer is introduced out there promising to be the largest one to take down Raspberry Pi. Indeed, there is a new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and costs you $30.

The Raspberry Pi is released with four variations as time passes. Included in these are Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most current which is Pi 3 Model B.

Pi 3 is built to ensure Raspberry Pi could meet the needs of anybody with a cheap computer for coding. It has replaced Processor chip with the Cortex A53, Hackaday suggested, and runs on 1.2 GHz. At $35, the Raspberry Pi is the top selling of all.

The Raspberry Pi, nevertheless, isn’t the single single board computer(SBC) for homebrewed projects. There are a number more in the industry which be cheaper, and then some that can do more than Raspberry Pi for a little bit more, ZD Net reported.

For a start, there is the Omega 2, featuring a modular nature permitting computer programmers to incorporate Wireless bluetooth or Gps system effortlessly. It has inbuilt Wi-Fi and flash storage area; the OS is Linux distribution founded upon the OpenWrt program. The Omega 2 will cost you $5 and is also able to run on FreeBSD Operating-system, which describes why it’s excellent for school students.

The BBC Micro:bit will cost you $16 and is excellent for learners for their exercising and prototyping projects. A 32-bit ARM Cortex processor powers it from the inside and it stands apart from the competition thanks to its 5×5 LED matrix. This benefit offers you 25 separately programmable red Led lights for basic output.

In addition, there is the BeagleBone Black, which will cost you $55 and like the Raspberry Pi, is yet another community-supported platform both for enthusiasts and builders. It works rapid; it is able to boost Linux in under 10 seconds and can develop in under Five min’s. It is actually driven by AM335x 1GHz ARM Cortex-A8 combined with 512MB DDR3 RAM.

Another one is the NanoPi M1 Plus, that has been referred to as as the most current Raspberry Pi killer. Priced at $30, it promises to have a tougher layout and design and was competent to incorporate beneficial benefits for example Wi-Fi and Bluetooth. What’s more, it presents an IR receiver, mic, 8GB memory, and power and reset keys.

However, the most beneficial attribute of NanoPi M1 Plus is its power to run Ubuntu-Mate, Ubuntu-Core, as well as Debian, Beta News declared. It is suited to business users, developers, hobbyists, and learners.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Know more on official webpage: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

There exists a new Raspberry Pi rival that is quite economical. Actually, some folks may consider it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an certainly exceptional layout and design, plus essential integrated features such as Wi-Fi and Bluetooth.

https://www.betanews.com/2017/03/02/friendlyelec-linux-debian-ubuntu-nanopi-m1-plus-raspberry-pi/

Circuit Board Assembly: A Message From Our CEO



http://www.lectronics.net – Circuit Board Assembly is our Business — Mario Sciberras, President of Saline Lectronics speaks about our company’s products, its service offerings, including printed circuit board assembly, and its approach to customer service. Call us at 1-734-944-2120 or visit http://www.lectronics.net for information about our electronic printed circuit board assemblies.

source

4 Tactics to Finding a Low-quantity PCB Assembly Fabricator

pcb board assy

Working with small-run PCB assemblies has its benefits and cons. As the consumer, there are a few points that will assist you to obtain the most out of your assembly. Outlined in this article, we’re going to explain how to benefit from the positives and approaches to avoid the negative aspects.

How to Opt for a Low-quantity PCB Assembly Fabricator?

The tips mentioned here should help you get the most out of your small-run PCB assembly order.


1. One Service Provider

Pick a small-run PCB manufacturer who could be a one-stop service provider for all of your PCB requires. The nice thing about working with a small order is basically that you don’t need to coordinate with several organizations or individuals. Your order can be handled by a single point of contact.


2. Incredible importance of Prototypes

Even if working with small orders, you must insist upon use of prototypes – even though it generates an added expenditure. Prototypes will let you look into your design and enhance it, if needed.


3. Low-quantity PCB Fabricator

pcb board assy

Making small-run PCB assemblies could be a task when working together with an unsophisticated manufacturer. Since the order quantity is low, cost of production will be a little higher. Thus, any error from the PCB manufacturer will generate greater losses for the purchaser.


4. Standard PCB Practices

Standard recommendations concerning PCB producing ought to be used regardless if working with a small-run PCB assembly. This can include design, fabricating, assy, and even PCBA testing steps.

Working with a small-run PCB assembly has its own set of perks. With the help of standard suggestions will permit you to build an order that might help you over time.

Older posts Newer posts

© 2018 PCB Prototype

Up ↑