PCB Prototype

Rapid PCB Prototype Service

Month: March 2017 (page 1 of 10)

How To Install Jasper On Raspberry Pi



Presenter: Aiden Magrath
Length: 10 Minutes

How to find IP Address: http://www.raspberrypi.org/documentation/troubleshooting/hardware/networking/ip-address.md
MiniTool Partition Wizard: http://download.cnet.com/MiniTool-Partition-Wizard-Home-Edition/3000-2094_4-10962200.html
Win32DiskImager: http://sourceforge.net/projects/win32diskimager/
Jasper Image: http://jasperproject.github.io/documentation/software/

Commands:
git clone https://github.com/jasperproject/jasper-client.git jasper
sudo pip install –upgrade setuptools
sudo pip install -r jasper/client/requirements.txt
cd ~/jasper/client
python populate.py

“Ice Flow”
Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
http://creativecommons.org/licenses/by/3.0/

source

Raspberry Pi Substitutes: The Reason They’re a Greater Buy

Raspberry Pi is not the baddest mini computer worldwide, and it’s what its competitors are seeking to tell the rest of the world. Now and then, a fresh mini computer is launched in the marketplace promising to be the largest one to overcome Raspberry Pi. Believe it or not, there exists a new Raspberry Pi killer referred to as NanoPi M1 Plus, which is Ubuntu-Linux ready and priced at $30.

The Raspberry Pi is released with 4 variations as time passes. These include Raspberry Pi Model B+, Pi 2 Model B, Zero, and the latest which is Pi 3 Model B.

Pi 3 was designed to be certain that Raspberry Pi has the ability to please anyone with a low cost computer for programming. It has replaced CPU with the Cortex A53, Hackaday suggested, and runs on 1.2 GHz. Priced at $35, the Raspberry Pi is the most well liked of all.

The Raspberry Pi, however, is not the only single board computer(SBC) for homebrewed projects. There are tons more already in the market which are cheaper, and then some that can do more than Raspberry Pi for a little extra, ZD Net announced.

For a start, there is the Omega 2, sporting a modular nature which allows developers to bring in Wireless bluetooth or Gps system with no trouble. It has integrated Wi-Fi and flash storage; the Operating-system is Linux distribution based on the OpenWrt program. The Omega 2 is priced at $5 and can also run on FreeBSD OS, which describe why it is an excellent option for high school students.

The BBC Micro:bit is priced at $16 and is best for students for their studying and prototyping projects. A 32-bit ARM Cortex processor chip drives it from the inside and it shines from the remainder for its 5×5 LED matrix. This function offers 25 singularly programmable red-colored Led lights for basic output.

In addition, there is the BeagleBone Black, which is priced at $55 and just like the Raspberry Pi, is yet another community-supported platform both for amateurs and builders. It works super fast; it does boost Linux in below 10-seconds and can develop in under Five min’s. It’s motorized by AM335x 1GHz ARM Cortex-A8 combined with 512MB DDR3 RAM.

Another one is the NanoPi M1 Plus, which was titled as the most recent Raspberry Pi killer. Priced at $30, it promises to have a much stronger layout and design and was ready to combine significant abilities like Wi-Fi and Bluetooth. Further, it carries an Infrared receiver, microphone, 8GB storage, and power and reset switches.

Nevertheless, the finest element of NanoPi M1 Plus is its power to run Ubuntu-Mate, Ubuntu-Core, as well as Debian, Beta News published. It is best for business users, developers, hobbyists, and students.

nanopi m1 plus specs

FriendlyElec roll-outs Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi alternative

Read more on official webpage: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

You will find a new Raspberry Pi contender that is quite budget friendly. Believe it or not, some people may view it as a Pi alternative. The $30 FriendlyElec NanoPi M1 Plus has an arguably outstanding layout and design, as well as crucial in-built features similar to Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Microscan-Non Destructive Testing inspection for printed circuit board assemblies



To find out more please visit: http://www.twi.co.uk/technologies/ndt/

Development of a comprehensive in-line quality control system for printed circuit board assemblies. Four Non Destructive Testing inspection modules based on digital radiography (X-ray) inspection, thermal inspection, automated optical inspection and acoustic inspection have been integrated to form a combined inspection system.
Assembled PCBs can suffer from many defects. It is highly beneficial for these defects to be detected, in-line, during the production stage, as failure in the field can result in massive financial costs for the manufacturer in terms of fault diagnosis, repair costs, lost reputation and loss of production time.

source

4 Guidelines to Picking out a Small-quantity PCB Assembly Producer

pwb assemblies

Working with small-quantity PCB assemblies has its upsides and downsides. As the client, there are several hints that will help you make the most out of your assembly. Outlined in this article, we’ll show you how to capitalize on the plus points and approaches to stay clear of the negative aspects.

The best way to Go with a Small-quantity PCB Assembly Producer?

The tips listed just below may help you get the most out of your small-quantity PCB assembly order.


1. Single Manufacturer

Pick a small-quantity PCB fabricator who can be a one-stop provider for all your PCB needs. The beauty with working with a small order is basically you don’t need to coordinate with several organizations or individuals. Your order can be handled by a single point of contact.


2. Importance of Prototypes

Even if working with small orders, you must require using prototypes – even if it generates an additional expense. Prototypes will assist you to look into your design and enhance it, when needed.


3. Small-quantity PCB Producer

pwb assemblies

Manufacturing small-quantity PCB assemblies can be quite a task when using the services of an rookie fabricator. Considering that the order quantity is low, expense of production will be marginally higher. Accordingly, any mistake by the PCB fabricator will result in increased losses for the customer.


4. Standard PCB Practices

Standard suggestions related to PCB manufacturing should be adopted regardless if working with a small-quantity PCB assembly. This can include design, fabricating, assy, and in addition PCBA testing processes.

Working with a small-quantity PCB assembly has its own variety of gains. By making use of standard suggestions will permit you to build an order that may help you in the long run.

Install Bluetooth for Raspberry Pi 3/Raspbian Jessie



To use the built-in Bluetooth of Raspberry Pi 3/Raspbian Jessie, we have to install some software:
$ sudo apt-get install pi-bluetooth
$ sudo apt-get install bluetooth bluez blueman
Then reboot.

This video show how to send/receive file between raspberry Pi 3/Raspbian Jessie and PC running Windows 10.
http://helloraspberrypi.blogspot.com/2016/03/setup-bluetooth-for-raspberry-pi.html

source

Raspberry Pi Alternatives: The Reason Why They’re a Better Buy

Raspberry Pi is not the baddest small computer on the earth, and it’s what its opponents are seeking to convey to the remaining of the world. Now and then, a new mini computer is released out there promising to be the biggest one to overcome Raspberry Pi. Believe it or not, there exists a new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and costs you $30.

The Raspberry Pi is released with four models through the years. Included in these are Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most recent which is Pi 3 Model B.

Pi 3 was created to make certain Raspberry Pi has the ability to delight anybody with a low-priced computer for programming. It has up-graded Processor chip with the Cortex A53, Hackaday stated, and runs on 1.2 GHz. At $35, the Raspberry Pi is the most well liked of all.

The Raspberry Pi, even so, is not the sole single board computer(SBC) for homebrewed projects. There are tons more in the market that are less expensive, and then some that can do more than Raspberry Pi for a little more, ZD Net expressed.

To begin with, there’s the Omega 2, with a modular nature encouraging computer programmers to increase Bluetooth or Global positioning systems conveniently. It has in-built Wi-Fi and flash memory space; the Operating system is Linux distro based on the OpenWrt system. The Omega 2 costs $5 and can even run on FreeBSD Operating system, and that is why it really is worthwhile for college students.

The BBC Micro:bit costs $16 and is best for school students for their learning and prototyping projects. A 32-bit ARM Cortex cpu energizes it from the inside and it stands out from the rest simply because of its 5×5 LED matrix. This function gives you 25 singularly programmable red-colored LEDs for basic output.

In addition, there is the BeagleBone Black, which costs $55 and exactly like the Raspberry Pi, is additionally a community-supported platform both for enthusiasts and coders. The system functions fast; it does boost Linux in only 10 seconds and can develop in less than 5 minutes. It’s motorized by AM335x 1GHz ARM Cortex-A8 coupled with 512MB DDR3 RAM.

Another one is the NanoPi M1 Plus, that was called as the most recently released Raspberry Pi killer. At $30, it promises to have a tougher layout and design and was capable to merge important functions for example Wi-Fi and Wireless BT. In addition, it has an IR receiver, microphone, 8GB memory space, and power and reset keys.

Yet, the most desirable element of NanoPi M1 Plus is its capability to run Ubuntu-Mate, Ubuntu-Core, and Debian, Beta News declared. It is great for business users, developers, enthusiasts, and school students.

nanopi m1 plus specs

FriendlyElec launches Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi substitute

Get more info on official webpage: http://friendlyarm.com/index.php?route=product/product&product_id=176

There is a new Raspberry Pi opponent that is quite cheap. For that matter, many people might consider it as a Pi substitute. The $30 FriendlyElec NanoPi M1 Plus has an arguably remarkable layout and design, and important integrated features similar to Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Episode 9 Design Tip; PCB Assembly – Manufacturing Data Requirements



In today’s episode, we are going to look at our data requirements in
order to process your job, and how providing the correct standard of
data can reduce queries and opportunities for error.
Applicable to all documentation:
• Our preference is to receive Electronic documents
• Documents should have a unique version/revision in order to track
changes
• Customers should update the version if they make even minor changes
to documentation that they have provided us to view (even if those
documents were provided just for quote purposes)
BOM
• Electronic format – our preference is spreadsheet (MS Excel)
o Most straight forward for us to work with
• Obvious stuff – circuit ref’s, description, quantity
• Customer part numbers
o Useful for using as a unique reference during communication
o Can be useful for identifying common parts across multiple assemblies
• Manufacturer and Supplier part numbers
• Non fitted parts (NF/OMIT)
PCB manufacturing files – Gerber data
• Usually supplied as single image, and we would step and repeat to
suit our processes.
• Ensure that gerber data includes manufacturing specifications
o Legend colour
o Resist colour
o Copper weight
o PCB thickness
o plating finish
• Breakout positions – highlight critical area of board outline?
Placement Data – ASCII CAD
• More useful than the standard centroid data (see picture)
• Many formats of output, but there are two generic formats:
o ODB++
o GENCAD
Placement drawing
• Mandatory for Fast Track
• Needs to be complete
o Showing every circuit reference
o Clearly showing polarity of polarised components
Mechanical drawings
• Require 2D CAD drawings for bespoke parts (even if free-issue – for
inspection purposes)
• Mechanical assemblies may require an exploded assembly drawing or
photo board assembly process
• Acceptable formats:
o AutoCAD DWG or DXF
o Solidworks eDrawings
o PDF (including the new 3D PDF format)
Test / Device Programming
• Firmware for programmable devices (inc. configuration bit settings
and checksum if poss.)
• Schematic diagrams
• Test instructions
More detail can be found in our Manufacturing Data Requirements
document, which can be found on our website, at www.Cogentcem.com.

source

4 Tactics to Selecting a Low-volume PCB Assembly Producer

pcb assembly

Working with low-quantity PCB assemblies has its upsides and drawbacks. As the client, there are several guidelines that can help you get the most from your assembly. On this page, we’re going to explain how to exploit the benefits and ways to go around the negative aspects.

Ways to Pick a Low-volume PCB Assembly Producer?

The tips pointed out here should help you make the most from your low-quantity PCB assembly order.


1. Single Service Provider

Decide on a low-quantity PCB manufacturer who can be a one-stop service provider for all of your PCB needs. The great thing about working with a small order is basically you don’t need to coordinate with several organizations or individuals. Your order can be treated by a single point of contact.


2. Great need of Prototypes

Even though working with small orders, you must require use of prototypes – although it causes an added expense. Prototypes will enable you to check your design and improve on it, if needed.


3. Low-volume PCB Producer

pcb assembly

Producing low-quantity PCB assemblies can be quite a task when using the services of an rookie manufacturer. Since the order quantity is low, expense of production will likely be to some degree higher. Therefore, any mistake by the PCB manufacturer will deliver greater losses for the client.


4. Standard PCB Practices

Standard best practices about PCB making must be implemented even if working with a low-quantity PCB assembly. This includes design, fabricating, assemblage, as well as PCBA testing procedures.

Working with a low-quantity PCB assembly has its own group of merits. Utilising standard best practices enables you to build an order that will help you finally.

How to Connect to a Raspberry Pi Directly with an Ethernet Cable



How to Connect to a Raspberry Pi Directly with an Ethernet Cable

Ethernet is the fastest and most reliable way to connect to your Pi. You can set this up in just a few steps and never get disconnected from network time outs or low bandwidth on your network. You can access your Pi without even being on a network. If you travel with your Pi, all you need is a laptop and an ethernet cable to connect to your Pi!

See the full tutorial here on our blog: http://www.circuitbasics.com/how-to-connect-to-a-raspberry-pi-directly-with-an-ethernet-cable/

Check out the Circuit Basics blog for articles and tutorials on the Raspberry Pi, Arduino and other DIY electronic projects! http://www.circuitbasics.com

Facebook: http://www.circuitbasics.com/facebook
Twitter: http://www.twitter.com/circuitbasics
Instagram: http://www.instagram.com/circuitbasics

source

Raspberry Pi Alternatives: Reasons Why They’re a Greater Buy

Raspberry Pi isn’t the baddest small PC on the globe, and it’s what its contenders are wanting to inform the remaining of the world. Now and then, a new mini computer is released in the marketplace promising to be the biggest one to conquer Raspberry Pi. To put it accurately, you will find there’s new Raspberry Pi killer known as NanoPi M1 Plus, which is Ubuntu-Linux ready and costs $30.

The Raspberry Pi is presented with four models through the years. These include Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most up-to-date which is Pi 3 Model B.

Pi 3 was established to make sure that Raspberry Pi can satisfy anyone with a low-priced PC for developer work. It’s enhanced Processor chip with the Cortex A53, Hackaday described, and runs on 1.2 GHz. At $35, the Raspberry Pi is the best selling of all.

The Raspberry Pi, still, isn’t the solely single board computer(SBC) for homebrewed projects. There are a number more in the industry which be cheaper, and then some that can do more than Raspberry Pi for a little more, ZD Net expressed.

For starters, there is the Omega 2, which includes a modular nature enabling coders to integrate Bluetooth or Gps unit without difficulty. It has integrated Wi-Fi and flash memory space; the OS is Linux distribution established on the OpenWrt program. The Omega 2 costs $5 and also can operate on FreeBSD OS, this is why it’s made for students.

The BBC Micro:bit costs $16 and is perfect for school students for their studying and prototyping projects. A 32-bit ARM Cortex central processor drives it internally and it stands apart from the remaining for its 5×5 LED matrix. This element gives you 25 separately programmable red LEDs for basic output.

There’s also the BeagleBone Black, which costs $55 and like the Raspberry Pi, is additionally a community-supported platform both for enthusiasts and programmers. It does the job quickly; it does boost Linux in lower than 10 seconds and can develop in within Five minutes. It’s fueled by AM335x 1GHz ARM Cortex-A8 coupled with 512MB DDR3 RAM.

Yet another one is the NanoPi M1 Plus, that was dubbed as the most current Raspberry Pi killer. At $30, it promises to have a tougher layout and design and was capable to combine necessary capabilities just like Wi-Fi and Bluetooth. In addition, it carries an Infrared receiver, mic, 8GB memory, and power and reset keys.

Yet, the best feature of NanoPi M1 Plus is its capacity to run Ubuntu-Mate, Ubuntu-Core, and Debian, Beta News declared. It’s great for business users, programmers, hobbyists, and school students.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Uncover more on official site: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

There exists a new Raspberry Pi rival that is quite affordable. In truth, a number of people may view it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an certainly superior layout and design, and critical built in features including Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

PCB Manufacture Melbourne



http://www.triodepcb.com/index.php/services/electronic-assembly
http://www.triodepcb.com/
http://qualitytimberdoors.com/
http://fastnfusioncurryhouse.com.au/
http://lighthousebeachdental.com.au/services/
PCB Manufacture Melbourne
The one and only electronics and electrical manufacturing company located in 3/81 Hillside Road, Wairau Valley, Auckland 0627, New Zealand. Our company is registered in the name of TRIODE GROUP LIMITED Electronic Contract Manufacturing Services. Triode Group Limited electronics and electrical manufacturing company are an ISO an 9001:2008 certified company. PCB Manufacture Company provides a variety of industrial electronics and electrical requirements and materials. Our company service provides a variety of manufacturing services are Product Assemblies, PCB Assemblies, and Material management.
PCB Assembly
Product Assemblies contain these works: Product Testing, Harness Assembly and Cable, Packaging, Final Functional Testing, and Box Build Assemblies.
PCB Assemblies contain these works: Prototype PCB Assembly, PCB Assembly Rework, Assembly Capabilities, Rosh Lead Free Assembly and Production PCB Assembly.
Material management contains these works: Quick-Turn Procurement, Full & Partial Turnkey, Component Sourcing, Customer Inventory Login, and Consignment Services.
Our company provides these services: COMPONENT SOURCING, MECHANICAL ASSEMBLY, PRODUCTION PCB ASSEMBLY, PROTOYPES & NPI ASSEMBLY, PCB ASSEMBLY CAPABILITY SUMMARY, REWORK & MODIFICATIONS , MATERIAL MANAGEMENT, THROUGH HOLE ASSEMBLY.

source

Four Guidelines to Choosing a Low-volume PCB Assembly Producer

printed circuit board assy

Working with small-run PCB assemblies has its upsides and cons. As the client, there are several guidelines that will assist you to get the most from your assembly. Here, we shall let you know how to make use of the possible benefits and the ways to move around the negative aspects.

How you can Decide on a Low-volume PCB Assembly Producer?

The tips pointed out below can help you maximum benefit out of your small-run PCB assembly order.


1. Single Supplier

Go with a small-run PCB manufacturer who can be a one-stop supplier for all of your PCB needs. The beauty with working with a small order is basically that you don’t need to coordinate with various organizations or individuals. Your order can be treated by a single point of contact.


2. Importance of Prototypes

Even if working with small orders, you must insist on using prototypes – even though it comes at an increased expense. Prototypes will enable you to examine your design and fix it, as required.


3. Low-volume PCB Producer

printed circuit board assy

Making small-run PCB assemblies can be quite a task when using an not experienced manufacturer. Considering that the order quantity is low, cost of production will likely be gently higher. Hence, any misstep from the PCB manufacturer will bring about increased losses for the customer.


4. Standard PCB Practices

Standard tips associated with PCB manufacturing needs to be adopted regardless if working with a small-run PCB assembly. This can include design, fabrication, assemblage, as well as PCBA testing steps.

Working with a small-run PCB assembly has its own group of positive factors. Using standard best practices enables you to build an order that can help you finally.

Tutorials: Raspberry PI SD card setup using a Mac



Welcome to a quick tutorial showing you guys how to setup your Raspberry PI SD card on a MacBook Pro. I used a 4GB kingston class 4 card for this tutorial.

Download link: http://www.raspberrypi.org/downloads

Terminal commands:

If you have issues with “permission denied” use “sudo” before the commands!

Remember to change anything in quote marks below to you own locations and disks(do not include quote marks).

Check for active disks: df -h
unmount the partition: diskutil unmount /dev/”yourDisk”
remember for the next bit your disk will change for example “disk2s1” becomes “rdisk2″
copy the image: dd bs=1m if=~/”directoryPathToYourFile” of=/dev/”yourDisk”

Hope this guide helps.

Follow: www.twitter.com/version3tech

source

Raspberry Pi Alternatives: The Reason They’re a Greater Buy

Raspberry Pi is not the baddest small PC all over the world, and it is what its challengers are attempting to inform the remaining of the world. Now and then, a new mini computer is introduced in the marketplace promising to be the largest one to take down Raspberry Pi. Truthfully, you will find a new Raspberry Pi killer known as NanoPi M1 Plus, which is Ubuntu-Linux ready and will set you back $30.

The Raspberry Pi is introduced with 4 versions over the years. They include Raspberry Pi Model B+, Pi 2 Model B, Zero, and the latest which is Pi 3 Model B.

Pi 3 is built to be sure Raspberry Pi has the ability to please a person with a low cost PC for developer work. It’s upgraded CPU with the Cortex A53, Hackaday explained, and runs on 1.2 GHz. At $35, the Raspberry Pi is the most well known of all.

The Raspberry Pi, having said that, is not the merely single board computer(SBC) for homebrewed projects. There are tons more on the market that cost less, and then some that can do more than Raspberry Pi for a little extra, ZD Net declared.

First of all, there’s the Omega 2, that features a modular nature allowing developers to incorporate Wireless bluetooth or Gps system easily. It has inbuilt Wi-Fi and flash storage space; the Operating-system is Linux distro established on the OpenWrt program. The Omega 2 will cost you $5 and can likewise run on FreeBSD Operating system, its no wonder that it’s just the thing for students.

The BBC Micro:bit will cost you $16 and is good for learners for their exercising and prototyping projects. A 32-bit ARM Cortex central processor drives it internally and it stands out from others in the industry thanks to its 5×5 LED matrix. This attribute offers you 25 separately programmable red-colored Led lights for basic output.

In addition, there is the BeagleBone Black, which will cost you $55 and like the Raspberry Pi, is one more community-supported platform both for fans and developers. It truly does work fast; it can actually boost Linux in around 10-seconds and can develop in under 5 min’s. It’s motorized by AM335x 1GHz ARM Cortex-A8 as well as 512MB DDR3 RAM.

Another one is the NanoPi M1 Plus, which was referred to as as the new Raspberry Pi killer. Priced at $30, it promises to have a more robust design and layout and was capable to add imperative attributes like Wi-Fi and Bluetooth. It also offers an IR receiver, microphone, 8GB storage space, and power and reset control buttons.

Yet, the most desirable function of NanoPi M1 Plus is its capability to run Ubuntu-Mate, Ubuntu-Core, and also Debian, Beta News declared. It’s just the thing for company users, programmers, enthusiasts, and learners.

nanopi m1 plus specs

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi substitute

Find out more on official website: http://friendlyarm.com/index.php?route=product/product&product_id=176

There’s a new Raspberry Pi rival that is quite low-priced. If truth be told, a lot of people may view it as a Pi substitute. The $30 FriendlyElec NanoPi M1 Plus has an arguably superb design and layout, and valuable built-in features similar to Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

Converting Printed Circuit Board Designs into SolidWorks Assemblies using CircuitWorks



This video shows how to use CircuitWorks within SolidWorks to convert a printed circuit board file into a SolidWorks assembly. CircuitWorks is able to convert a number of different file types. This tool is very useful when trying to design models that contain circuit boards. You are able to input the height of each component that is on the circuit board which lets you adjust you design to allow acquit air flow and clearance around the components.

If you are a student or educator check out our website at http://www.solidworks.com/education

source

Four Suggestions for Picking a Small-run PCB Assembly Producer

pc board assy

Working with small-quantity PCB assemblies has its upsides and cons. As the purchaser, there are a few hints that will help you get the most from your assembly. In this post, we shall show you how to make use of the pluses and the ways to get around the negative aspects.

Tips to Select a Small-run PCB Assembly Producer?

The guidelines mentioned in this article can help you maximum benefit out of your small-quantity PCB assembly order.


1. Single Supplier

Pick out a small-quantity PCB manufacturer who can be a one-stop provider for all your PCB needs. The main benefit of working with a small order is that you don’t have to coordinate with several organizations or individuals. Your order can be handled by a single point of contact.


2. Incredible importance of Prototypes

Even when working with small orders, you must insist upon using prototypes – even though it comes at an additional cost. Prototypes will permit you to evaluate your design and fine-tune it, when necessary.


3. Small-run PCB Producer

pc board assy

Manufacturing small-quantity PCB assemblies could be a task when using an unskilled manufacturer. For the reason that order quantity is low, expense of production is going to be a bit higher. As a consequence, any mistake from the PCB manufacturer will bring on increased losses for the consumer.


4. Standard PCB Practices

Standard best practices associated with PCB making really should be followed although working with a small-quantity PCB assembly. This can include design, fabricating, assembly, and PCBA testing steps.

Working with a small-quantity PCB assembly has its own list of advantages. Implementing standard tips will let you build an order that can help you eventually.

Raspberry PI Operating System Installation – Raspbian using NOOBS 1.3



Shows how to setup and install the Raspbian operating sytstem on a Raspberry PI and SD card for the first time. Uses NOOBS 1.3 to install the software. Part of an article at:
http://startingelectronics.org/articles/raspberry-PI/ten-things-raspberry-PI/

source

Raspberry Pi Alternate Options: The Reason They Are a Better Buy

Raspberry Pi is not the baddest small computer in the market, and it’s what its contenders are wanting to tell the rest of the world. Now and then, a fresh mini computer is introduced in the marketplace promising to be the largest one to take down Raspberry Pi. Actually, you will find a new Raspberry Pi killer called NanoPi M1 Plus, which is Ubuntu-Linux ready and charges $30.

The Raspberry Pi is introduced with 4 versions as time goes by. These include Raspberry Pi Model B+, Pi 2 Model B, Zero, and the most recently released which is Pi 3 Model B.

Pi 3 was created to be certain that Raspberry Pi has the ability to suit anybody with a low priced computer for programming. It’s upgraded CPU with the Cortex A53, Hackaday described, and runs on 1.2 GHz. At $35, the Raspberry Pi is the trendiest of all.

The Raspberry Pi, having said that, is not the solely single board computer(SBC) for homebrewed projects. There are tons more available that will cost less, and then some that can do more than Raspberry Pi for a bit more, ZD Net announced.

To start with, there’s the Omega 2, with a modular nature helping computer programmers to add on Wireless bluetooth or Gps unit with no trouble. It has built-in Wi-Fi and flash storage space; the Operating system is Linux distribution on top of the OpenWrt program. The Omega 2 charges $5 and can run on FreeBSD Operating system, its no wonder that it’s well suited for people in the course.

The BBC Micro:bit charges $16 and is excellent for students for their exercising and prototyping projects. A 32-bit ARM Cortex cpu powers it internally and it is different from the rest because of its 5×5 LED matrix. This benefit presents 25 independently programmable red-colored LEDs for basic output.

There is also the BeagleBone Black, which charges $55 and like the Raspberry Pi, is yet another community-supported platform both for fans and builders. The system functions super fast; it can actually boost Linux in around 10 seconds and can develop in under Five min’s. It is motorized by AM335x 1GHz ARM Cortex-A8 as well as 512MB DDR3 RAM.

Someone else is the NanoPi M1 Plus, which has been named as the new Raspberry Pi killer. At $30, it promises to have a more robust design and layout and was able to assimilate notable elements for instance Wi-Fi and Wireless BT. Additionally, it contains an IR receiver, mic, 8GB storage space, and power and reset control buttons.

However, the most advantageous element of NanoPi M1 Plus is its ability to run Ubuntu-Mate, Ubuntu-Core, and Debian, Beta News published. It is well suited for company users, developers, lovers, and students.

nanopi m1 plus specs

FriendlyElec rolls out Ubuntu Linux-ready NanoPi M1 Plus – a $30 Raspberry Pi killer

Get more info on official website: http://www.friendlyarm.com/index.php?route=product/product&product_id=176

There’s a new Raspberry Pi competitor that is quite low-priced. If truth be told, some folks might see it as a Pi killer. The $30 FriendlyElec NanoPi M1 Plus has an certainly excellent design and layout, and crucial included features just like Wi-Fi and Bluetooth.

FriendlyElec releases Ubuntu Linux-ready NanoPi M1 Plus — a $30 Raspberry Pi killer

ALTIMEX Electronic Manufacturing Service – PCB Assembly



Experienced in all aspects of electronic design, the team of design engineers at Altimex has been providing a successful electronic design service since 1995. Using the very latest software and state-of-the-art test equipment, we are repeatedly able to fulfil the client’s requirements to the letter of the brief. Often providing unique solutions to a client’s wide range of electronic problems, we are frequently regarded and used as a collaborative extension of the client’s own in-house team.

We are able to take your concept ideas and design the electronic control system to meet your requirements from the ground up. Having produced the prototype for you approval, we will then carry out the full scale production, all within our Cheshire-based manufacturing unit. We are able to offer our clients a full range of services from single, hand-mounted pcb assemblies up to multi-layer boards using pick and place equipment, with flow soldering for high volumes. We pride ourselves on offering “smart” solutions using advanced manufacturing technologies wherever appropriate.

We constantly strive to work as closely as possible with our customers and endeavor to offer all the benefits of the latest technology combined with a fast and friendly service. All work is carried out in a confidential manner, working to our own internal strict quality management system .We work to all required external standards, including SIL where necessary.

source

4 Strategies to Finding a Small-run PCB Assembly Fabricator

pwb assembly

Working with low-volume PCB assemblies has its advantages and disadvantages. As the purchaser, there are some guidelines that will allow you to obtain the most out of your assembly. In this posting, we will show you how to make use of the benefits and approaches to get around the negative aspects.

Find out how to Select a Small-run PCB Assembly Fabricator?

The guidelines explained here might help you obtain the most from your low-volume PCB assembly order.


1. One Provider

Choose a low-volume PCB maker who could be a one-stop provider for all of your PCB requirements. The benefit of working with a small order is basically that you don’t have to coordinate with several organizations or individuals. Your order can be treated by a single point of contact.


2. Value of Prototypes

Even when working with small orders, you must require use of prototypes – regardless if it comes at an extra expense. Prototypes will help you to evaluate your design and strengthen it, as needed.


3. Small-run PCB Fabricator

pwb assembly

Producing low-volume PCB assemblies could be a task when cooperating with an unsophisticated maker. As the order quantity is low, cost of production will probably be a little bit higher. As a consequence, any mistake on the part of the PCB maker will end in increased losses for the customer.


4. Standard PCB Practices

Standard guidelines related to PCB manufacturing needs to be implemented regardless if working with a low-volume PCB assembly. This consists of design, manufacturing, assemblage, and in addition PCBA testing procedures.

Working with a low-volume PCB assembly has its own set of benefits. Utilising standard recommendations will assist you to build an order that might help you down the road.

Older posts

© 2017 PCB Prototype

Up ↑